European Technology, Schneider electric control part.
PLC PANASONIC, PANASONIC transducer, WENVIEW monitor from Taiwan, sensor Omron from Japan.
The main electric parts can run more than 50, 00, 000 times. Its automatic running realize transportation , speed up press glass --- two or three pieces of glass & different sizes of glass .it adjust the size of different glass by servo motor, it is high auto and more exact running.
The press part can open and go side to install and maintain the machine the front box is vaccume; the back box is pneumatic driving. It can deal with two or three pieces of glass and curtain walls.
Any angle When press it is control by mechanical hand (mechanical position & suck part from Taiwan), all this make the press right position will not dislocation.
The speed is 45 M per minute and it has glass waiting process, its high effect ion will produce 1000 pieces of glass in 8 hours.
The frame is welding from 2.75 mm international rectangular pipe, high strength of frame and it will not change the shape.
Washing and drying machine
The washing part and drying part are made of stainless steel, it is high strength and shape will not change; the top parts made from 12mm thick stainless steel; the bottom is made from 5mm thick stainless steel, the lateral is made from 2mm thick stainless steel.
OMRON recognization system for low E glass, it can know if it is the coating side of the low-E glass. If it is Low-E glass the hard brushes will apart avoid damaging the coating of glass.
Six anti-temperature brushes, diameter is 180 mm. four sprayers, high speed, glass washing clean, speed is about 10-12m per minute.
The spring is stainless steel and can adjust 3-20 mm for different thickness of glass.
Any angle All part contact water include the axle in the washing machine is stainless steel, copper or waterproof aluminium, nylon and so on, it will not rust for long time running , and easy to maintain.
Dear driving system takes chain reaction so it will not leave the original position after long time running.
Drying part frame is stainless steel will not dirty the glass second time, the circle wind also down the noise.
The circle hot wind down the noise comes from the machine (in winter the hot wind temperature can reach 40 even no heating).
GPL-XY2200Y Insulating Glass Processing Line With Turning Table
Press machine
European Technology, Schneider electric control part.
PLC PANASONIC, PANASONIC transducer, WENVIEW monitor from Taiwan, sensor Omron from Japan.
The main electric parts can run more than 50, 00, 000 times. Its automatic running realize transportation , speed up press glass --- two or three pieces of glass & different sizes of glass .it adjust the size of different glass by servo motor, it is high auto and more exact running.
The press part can open and go side to install and maintain the machine the front box is vaccume; the back box is pneumatic driving. It can deal with two or three pieces of glass and curtain walls.
When press it is control by mechanical hand (mechanical position & suck part from Taiwan), all this make the press right position will not dislocation.
When press the glass will leave the transportation roller to do in this way it will longer the life time of transportation roller and will not break the glass.
The speed is 45 M per minute and it has glass waiting process, its high effect ion will produce 1000 pieces of glass in 8 hours.
The frame is welding from 2.75 mm international rectangular pipe, high strength of frame and it will not change the shape.
Washing and drying machine
The washing part and drying part are made of stainless steel, it is high strength and shape will not change; the top parts made from 12mm thick stainless steel; the bottom is made from 5mm thick stainless steel, the lateral is made from 2mm thick stainless steel.
OMRON recognization system for low E glass, it can know if it is the coating side of the low-E glass. If it is Low-E glass the hard brushes will apart avoid damaging the coating of glass.
Six anti-temperature brushes, diameter is 180 mm. four sprayers, high speed, glass washing clean, speed is about 10-12m per minute.
The spring is stainless steel and can adjust 3-20 mm for different thickness of glass.
Any angle All part contact water include the axle in the washing machine is stainless steel, copper or waterproof aluminium, nylon and so on, it will not rust for long time running , and easy to maintain.
Dear driving system takes chain reaction so it will not leave the original position after long time running.
Drying part frame is stainless steel will not dirty the glass second time, the circle wind also down the noise.
The circle hot wind down the noise comes from the machine (in winter the hot wind temperature can reach 40 even no heating).
Base material supply system and curing agent supply system Using special high-pressure Piston pump, two-way equivalent feeding for the silicon, accompanied by pressurized feed Pressure plate, and fully guarantee pumping high viscosity fluid filled, to prevent mixing of air to ensure stable medium output. Pneumatic lifting mechanism to replace the materials quickly and easily.
Compounding System Adoption of Synchronous linkage with adjustable ratio booster system. The ratio of material to adapt to different mixing requirements (6:1-14:1). With special mixing ratio testing system and convenient to adjust the mixing ratio, the ratio tolerance is less than 2%
Mixer--Adoption of static reciprocating tube mixer. Small size and light weight. Imports mixed core to mix more evenly durable and reliable, the domestic unique needle and one-way valve to Ensure that mixing material does not return and to avoid pipe freezing.
Silicon extruding system-Adoption of import glue gun, the operation is extremely simple. After the first time adjustment of gas pressure, almost no any other operation. Feeing, matching, mixing and spraying in one process. just gently pull each time (release) gun trigger, you can immediately start the whole system (off). Sensitive high-pressure protection valve (imported) to make the operation easier.
The parts contact the fluid is all made of high quality stainless steel. Seal rings use imported high-quality Teflon material which is reliable and durable. Perfect service and spare parts supply so that you can use it without worry.
The system is pure air, no electricity, no hydraulic, easy to adjust, simple and safe operation. The system adopts the most advanced technology and production processes, the ratio of precision ( 2%), and mix well.
Optional electric heat insulation device in order to adapt to temperature changes.
It is used to fill insert gas into insulating glass to make the insulating glass better hot and cold air resistance, improve quality of insulating glass.