Zenium Cables PVC Insulated single core cables with flexible/stranded conductors are manufactured with most stringent quality control to ensure total safety, prevention of shock hazards, less possibility of fires and complete assurance for a perfect system. These are used for indoor fixed installations in dry locations where particular flexibility is required. For building installations they can be laid in conduits over or under the walls as well as in steel brackets. These wires are ideal for any industrial/ Equipment / appliances application. The flexible cords with copper conductors for electric power and lighting including WEATHERPROOF cables upto 1100 volts are also manufactured here.

Zenium Cables Manufactures multi-core screened (Shielded / braided) flexible cables used for low noise signal cables and control purposes. These cables are generally confirming to PAS - 5308 and are manufactured with flexible copper conductors, PVC insulation, Tinned copper braided / shielded with overall PVC sheath. These cables are especially developed for defence, Telecommunication and electronic applications. Very feeble signals can be transmitted with least interference
INSTRUMENTATION CABLES Zenium manufactures multi-pair / triad instrumentation cables for use inside plants and electrical equipments where there is low frequency. These cables consists of annealed copper conductor draw from bright electrolytic grade copper PVC / POLYETHEYLENE / XLPE insulated, individually, or overall shielded with BOPP & AL MYLAR Tape, Tinned copper drain wire & overall PVC sheath. Here bunched conductors are insulated with various specially formulated and developed compounds with high resistance & low capacitance values.

Zenium 1100 Volts power cables manufactured using high grade XLPE insulation which provides better operating temperature than any other compound, with electrolyte grade stranded copper/aluminium laid together, extruded using protected PVC inner sheath, Special zinc coated galvanized iron wire/strip armour providing protection against any external environmental hazards. This assembly is overall sheathed with high grade PVC with FRLS and ZHFR compounds that are designed and tested. These cables meet national and international standards like IS:7098 part-1:1988 and IEC 60502. These cables are suitable for use in fixed installation.

Zenium 1100 Volts power cables manufactured using high grade PVC insulation, with electrolyte grade stranded copper/aluminium laid together, extruded using protected PVC inner sheath, Special zinc coated galvanized iron armour wire/strip providing protection against any external environmental hazards. This assembly is overall sheathed with high grade PVC having FRLS and ZHFR compounds that are designed and tested. These cables meet national and international standards like IS:1554 part-1:1988 and IEC 60502. These cables are suitable for use in fixed installation.

Zenium 1100 Volts control cables are manufactured using high grade XLPE/PVC insulation, with electrolytic grade solid/stranded/flexible plain annealed and tinned copper conductor laid together, extruded using protected PVC inner sheath, special zinc coated galvanized iron wire/strip armour providing protection against external environmental hazards. This assembly is overall sheathed with high grade PVC with FRLS, ZHFR and LSHF compounds that are designed and tested. Theses cables meet national and international standards like IS:1554 part-1:1988, IS:7098 part-1:1988 and IEC 60502. These cables are suitable to use indoor/outdoor for control and power transmission.

We have latest state-of-the-art manufacturing and testing facilities at our imported plant to manufacture co-axial cables as per internationally accepted norms. The cables are specially designed processed and tested to resist moisture, heat and humidity to suit extreme Indian Weather Conditions. A fully computerized process monitoring and quality control system ensures consistency, reliability and optimum electrical characteristics (including minimum db loss) for our digital cables giving fullest satisfaction over a long span to end-users.

Zenium CCTV Cables are offered in two types namely 4 + 1 CCTV Cable and 3 + 1 CCTV Cable. Co-axial cables form the carrier for video signal and the other 4 cores or 3 cores form the carriers for power. Co-axial cables are designed to transmit the complete video frequency range with minimum distortion or attenuation, making them an excellent choice for CCTV. Zenium CCTV cables are designed to optimize the quality of video signals, which are transmitted through the co-axial cables in the CCTV cable. The co-axial cable consists of solid annealed bare copper conductor of electrolytic grade which is insulated with Nylon foamed dielectric aluminium foil taped, jelly flooded, braided with Al. Alloy and then jacketed with FR PVC. Top most quality of construction of co-axial cable in Zenium CCTV Cables ensures distortion free video signals and thus a clear picture over complete low frequency bandwidth of transmission in such applications. the impedance of co-axial cable is 75, which matches the CCTV equipment. This matching ensures adequate signal strength, no reflection and best picture quality. In CCTV the co-axial cable is of type RG-59 which has highest attenuation compared to RG-6 and RG-11. Hence, it is recommended for use only for distance upto 300 - 350 ft. Foamed PE dielectric delivers excellent electrical properties such as low capacitance and high velocity of propagation. This results in low less characteristics and reduced attenuation of the video signal. Al. Alloy braiding of 70% coverage ensures complete elimination of EMI / RFI from the video signals and provides a reduced DC resistance ground path. Jacketing with ST-3 is ideal for all in door and out door applications.

ZENIUM LAN CABLES :UTP CAT 5 meet the performance requirement of TIA/EIA 568 C.2 and are most suitable for voice, data, video, low voltage control and all LAN topologies including Horizontal and Vertical distribution Plenum and Riser.
Application : This Category 5, four pair cable is a high speed, high performance, 100 ohm impedance cable capable of carrying high bit-rate signalling for extended distance in horizontal cabling. Signal amplifiers are not required for a length of 328 feet (100M). Applications can include Voice, ISDN, ATM 155 Mbps, ATM 622 Mbps, 1000 Mbps TPDDI, Fast and Giga Ethernet, 100 Mbps TP-PMD, 1000 BASE-T.

Zenium Cables PVC Insulated single core cables with flexible/stranded conductors are manufactured with most stringent quality control to ensure total safety, prevention of shock hazards, less possibility of fires and complete assurance for a perfect system. These are used for indoor fixed installations in dry locations where particular flexibility is required. For building installations they can be laid in conduits over or under the walls as well as in steel brackets. These wires are ideal for any industrial/ Equipment / appliances application. The flexible cords with copper conductors for electric power and lighting including WEATHERPROOF cables upto 1100 volts are also manufactured here.

Zenium Cables Manufactures multi-core screened (Shielded / braided) flexible cables used for low noise signal cables and control purposes. These cables are generally confirming to PAS - 5308 and are manufactured with flexible copper conductors, PVC insulation, Tinned copper braided / shielded with overall PVC sheath. These cables are especially developed for defence, Telecommunication and electronic applications. Very feeble signals can be transmitted with least interference
INSTRUMENTATION CABLES Zenium manufactures multi-pair / triad instrumentation cables for use inside plants and electrical equipments where there is low frequency. These cables consists of annealed copper conductor draw from bright electrolytic grade copper PVC / POLYETHEYLENE / XLPE insulated, individually, or overall shielded with BOPP & AL MYLAR Tape, Tinned copper drain wire & overall PVC sheath. Here bunched conductors are insulated with various specially formulated and developed compounds with high resistance & low capacitance values.

Zenium 1100 Volts power cables manufactured using high grade XLPE insulation which provides better operating temperature than any other compound, with electrolyte grade stranded copper/aluminium laid together, extruded using protected PVC inner sheath, Special zinc coated galvanized iron wire/strip armour providing protection against any external environmental hazards. This assembly is overall sheathed with high grade PVC with FRLS and ZHFR compounds that are designed and tested. These cables meet national and international standards like IS:7098 part-1:1988 and IEC 60502. These cables are suitable for use in fixed installation.

Zenium 1100 Volts power cables manufactured using high grade PVC insulation, with electrolyte grade stranded copper/aluminium laid together, extruded using protected PVC inner sheath, Special zinc coated galvanized iron armour wire/strip providing protection against any external environmental hazards. This assembly is overall sheathed with high grade PVC having FRLS and ZHFR compounds that are designed and tested. These cables meet national and international standards like IS:1554 part-1:1988 and IEC 60502. These cables are suitable for use in fixed installation.

Zenium 1100 Volts control cables are manufactured using high grade XLPE/PVC insulation, with electrolytic grade solid/stranded/flexible plain annealed and tinned copper conductor laid together, extruded using protected PVC inner sheath, special zinc coated galvanized iron wire/strip armour providing protection against external environmental hazards. This assembly is overall sheathed with high grade PVC with FRLS, ZHFR and LSHF compounds that are designed and tested. Theses cables meet national and international standards like IS:1554 part-1:1988, IS:7098 part-1:1988 and IEC 60502. These cables are suitable to use indoor/outdoor for control and power transmission.

We have latest state-of-the-art manufacturing and testing facilities at our imported plant to manufacture co-axial cables as per internationally accepted norms. The cables are specially designed processed and tested to resist moisture, heat and humidity to suit extreme Indian Weather Conditions. A fully computerized process monitoring and quality control system ensures consistency, reliability and optimum electrical characteristics (including minimum db loss) for our digital cables giving fullest satisfaction over a long span to end-users.

Zenium CCTV Cables are offered in two types namely 4 + 1 CCTV Cable and 3 + 1 CCTV Cable. Co-axial cables form the carrier for video signal and the other 4 cores or 3 cores form the carriers for power. Co-axial cables are designed to transmit the complete video frequency range with minimum distortion or attenuation, making them an excellent choice for CCTV. Zenium CCTV cables are designed to optimize the quality of video signals, which are transmitted through the co-axial cables in the CCTV cable. The co-axial cable consists of solid annealed bare copper conductor of electrolytic grade which is insulated with Nylon foamed dielectric aluminium foil taped, jelly flooded, braided with Al. Alloy and then jacketed with FR PVC. Top most quality of construction of co-axial cable in Zenium CCTV Cables ensures distortion free video signals and thus a clear picture over complete low frequency bandwidth of transmission in such applications. the impedance of co-axial cable is 75, which matches the CCTV equipment. This matching ensures adequate signal strength, no reflection and best picture quality. In CCTV the co-axial cable is of type RG-59 which has highest attenuation compared to RG-6 and RG-11. Hence, it is recommended for use only for distance upto 300 - 350 ft. Foamed PE dielectric delivers excellent electrical properties such as low capacitance and high velocity of propagation. This results in low less characteristics and reduced attenuation of the video signal. Al. Alloy braiding of 70% coverage ensures complete elimination of EMI / RFI from the video signals and provides a reduced DC resistance ground path. Jacketing with ST-3 is ideal for all in door and out door applications.

ZENIUM LAN CABLES :UTP CAT 5 meet the performance requirement of TIA/EIA 568 C.2 and are most suitable for voice, data, video, low voltage control and all LAN topologies including Horizontal and Vertical distribution Plenum and Riser.
Application : This Category 5, four pair cable is a high speed, high performance, 100 ohm impedance cable capable of carrying high bit-rate signalling for extended distance in horizontal cabling. Signal amplifiers are not required for a length of 328 feet (100M). Applications can include Voice, ISDN, ATM 155 Mbps, ATM 622 Mbps, 1000 Mbps TPDDI, Fast and Giga Ethernet, 100 Mbps TP-PMD, 1000 BASE-T.