ZEBA Automation

Sector 29, Panipat, Haryana

Zeba  Automation package substations are available upto 24KV. The fully equipped package substation (PSS), comprises of outdoor duty enclosure, medium voltage switchgear, distribution transformer, low voltage panel & AFPCR panel (optional) is a state of art equipment for all your power distribution requirements.The factory assembled self contained package substation is a complete weather proof solution.It only requires to connect incoming and outgoing cables and hence the site work involved is an absolute minimum.

FEATURES

• Self contained package substation
• All the equipment packed in a separate compartment
• All compartments are individually accessible
• Individual Door Operated lamp for illumination purpose

BENEFITS

• Complete weather Proof solution
• Ready to position solution
• Four lifting eyes for ease of lifting
• Minimum site

Enclosure outdoor

Enclosure outdoor body is made of Galvanised sheet steel in corrugated type design for proper heat dissipation.The enclosure is painted with epoxy based powder paint (colour-RAL 7032) suitable for outdoor installations.The compartments are provided with separate doors and pad locking arrangements.Each compartment is fitted with door operated lamp for illumination purpose.For safety purpose, the transformer compartment doors are fitted with arc reflectors.

Medium Voltage (MV) switchgear

The Medium Voltage (MV) switchgear compartment is equipped with C&S make SF6 insulated Ring Main Unit.The GC is equipped with SF6 insulated sealed tank, Switch disconnectors and Vacuum circuit breakers.The ring main unit is designed and tested for internal Arc as per IEC 62271-200.The product conforms to IEC62271-1, IEC 62271-100, IEC 62271-103 and IEC 622271-200.

Distribution transformer

The distribution transformer is equipped with professionally designed ventilation openings for air flow to keep transformer cool.The compartment is provided with a pressure relief system integrated in the ceiling. An optional floor mesh is also provided to restrict the entry of small animals and other foreign objects.The compartment can accommodate both Oil immersed and Dry type transformers.The product conforms to IEC 2026 and IS 11171.

Help maximize system reliability and optimize operational efficiency to increase your profitability

Power Monitoring Expert software is a complete supervisory software package for power management applications. The software collects and organizes data gathered from your facility’s electrical network and presents it as meaningful, actionable information via intuitive web interface. Share information with key stakeholders or across your entire operation to influence behavioral changes that can save you money.

Presentation

Overview of our power management solutions expertise.Power Monitoring Expert software’s open architecture supports industry standard protocols and an expansive range of Schneider Electric and third-party devices. Leverage and optimize your existing infrastructure. Integrate with other energy management and automation systems (e.g. SCADA, BAC, DCS, ERP) or web services.

Features

• Intuitive, customizable web client interface with multi-language support
• Real time monitoring with factory defined screen templates for device data
• Standard and advanced energy reports for consumption analysis and cost management
• Full WAGES support (dashboards, reports and screens) across the software tools
• Pre-defined or custom alarm management
• Input metering support
• Automatic database logging
• Fully compatible with ION technology
• Supports PowerLogic ION Enterprise software and System Manager software migrations

Benefits

Power Monitoring Expert software is a complete, interoperable, and scalable software dedicated to power management that enables you to:

• Improve operational efficiency
• Reduce energy-related costs
• Ensure electrical network reliability and reduce downtime
• Optimize equipment utilization and the cost of operations
• You can also access our support services to support, maintain, scale and upgrade your Power Monitoring Expert system throughout the lifetime of the installation.

Applications

Purpose built software with best in class power management applications available out of the box to meet the needs of most critical facilities.

• Power quality compliance, analysis, alarming, and reporting
• WAGES monitoring and reporting
• Real time power monitoring and reporting
• Sequence of Events (event forensics) and root cause analysis
• Asset optimization
• Proactive maintenance of electrical equipment
• Energy cost allocation and billing
• Energy efficiency programs
• Sustainability metrics
• Measurement and verification
•  Manage demand and PF penalties
• Benchmarking & reporting
• ISO 50001 certification

Key Features

• Fast correction rate and high efficiency. 
• Work over wide input frequency range and no waveform distortion. 
• Various models are available suitable for different voltage conditions, indoor or outdoor installation. 
• System bores wide input frequency variations without any waveform distortion. 
• Voltage regulation is independent of load power factor. 
• State of the art electronics controls for versatility, reliability and easy online serviceability. 
• User friendly front panel controls with auto/manual operation, output nominal voltage adjustments, status indicators for under/over voltage and trip alarm for fault condition. 
• All components used are of reputed makes, confirming relevant IS/BIS standards. 
• Stabilizers are subjected to routine and type tests in accordance with lates BIS standards (IS:9815-94 

Power Distribution Panel Power distribution panel is an essential component of every electricity supply system. These boards feed electrical power to different circuits that provide protective and efficient fuse and circuit breakers for every circuit and can be accessed with simplicity in case of an electrical fault. Power distribution system is increasingly growing with the

Retrofitting Work Retrofitting refers to the process of updating older equipment with new technology. In the world of industrial electrical equipment, retrofits are regularly used to add functionality to many types of electrical equipment, including circuit breakers, motor controls, panelboards and switchgear. Technical Specification Cable Termination work Fault Attending work Panel Component repairing and Replacement

APFC Panel Automatic Power Factor Control or APFC Panels are mainly used for the improvement of Power Factor. Power Factor is the ratio of active power to apparent power and it is a major component in measuring electrical consumption. APFC is an automatic power factor control panel which is used to improve the power factor,

Zeba Automation are the manufacturers and exporters of Enclosure systems manufacturers exporters in India. Steel and MS Steel Cabinets and Racks for all your wall mounted and floor standing requirements.

Zeba Automation believe that the best way to design the perfect product is to work closely with our customers. We offer one of the most comprehensive ranges of industrial enclosures and accessories for Automation and Control applications, Heating Ventilation and Air-conditioning (HVAC) and Power and Distribution systems. We have enclosures in mild steel, stainless steel, aluminum and plastic to meet most requirements.

Typical applications: heating, ventilation, air conditioning OEM’s, small control systems, distribution solutions.

• One-piece body for optimum rigidity and maximum IP.
• Multi-purpose: mounting plate, 19 inch profiles, swing frame, modular system.
• Easy-to-work-with.
• Large useful mounting space.
• Easy equipment positioning.
• Factory customisation.
• Approvals and certifications.

We are here to help you with enclosure solutions at the right price and quality for control and power applications.

Whatever your enclosure need, you will benefit from our multiple wall-mounted, floor standing and console solutions available in a variety of materials, including mild or stainless steel, and aluminium, Fiberglas-reinforced poly-carbonate, GRP, ABS and polyester.

Our full range of accessories include fixing systems, thermal management, multiple shelving and door configurations, baying, hinging, smart cable management as well as a host of general purpose devices including lights, door switches, power sockets, signal towers, din rails, cage nuts and screws.

We can modify our standard enclosures to incorporate custom hole patterns and different colors and dimensions, or any other modification, to make it easy for you to utilize our standard enclosures in your own machine design.

JUNCTION BOX Panel An electrical junction box is an enclosure housing electrical connections, to protect the connections and provide a safety barrier. With MOC of SS, MS, FLP with IP rating of IP4etc.