GST : 24AAAFZ6682K1ZO
Verified
Add Review
We ZAC Valves & Fittings are a leading and distinguished Manufacturer, Exporter, Supplier, Retailer and Trader of quality Actuator Operated Butterfly Valve, Air Filters, Air Lubricator, Air Regulator and Auto Drain Valves.
Body : Stainless Steel Ball : Stainless Steel Stem : Stainless Steel Seat & Seal : PTFE Stem Nut : Stainless Steel Handle : Stainless Steel Sleeve : Plastic Gland Packing : PTFE Size : 15mm (1/2") to 100mm (4") End Connection : Screwed, BSP (F) Working Pressure : : 10kg/cm² Media : Water / Oil / Air / Steam / Gas
Body : Aluminium Pressure Die Cast Bowl : P.C. Bowl with Guard/Metal Bowl Size : 8mm (1/4") to 50mm (2") Filter Element : 5micron Spare Filter Element : Available Design Pressure : 0-10kg/cm² Temperature Resistance : 50°C Warranty : 1 year (as per our warranty certificate) Application: Removing dust, rust and solid particles Media : Compressed Air Installation Preferred : At the entry level in each equipment/instrument/tool after Moisture Separator in vertical position Min. Distance Required : 6 mtrs. after compressor/air receiver tank
Body:Aluminium Pressure Die Cast Size:15mm (1/2") Flow Rate of SCFM :40 Filter Element:Imported SS Coalescer, Non Replaceable Efficiency:99.99% Design Pressure:0-10kg/cm² Testing Pressure:12kg/cm² Service Life:3-5 years Maintenance:No maintenance required in Moisture Separator. Cleaning required on clogging in Mechanical Auto Drain Valve Spares:No spares required Warranty:1 year (as per our warranty certificate) Media:Compressed Air Installation Preferred:At the end before FRL in each equipment/instrument/tool in vertical position Min.Distance Required:6 mtrs. after compressor/air receiver tank Drainage Provision:Mechanically operated automatic drainage given
Valve Body : IC SS-304 Timer Body : ABS Plastic Check Nut : Steel Plated Connection Port : 15mm (1/2")-F BSP Design Pressure : 10,21 & 60kg/cm² Coil Voltage : 230V AC, 50-60Hz Critical Ambient Temp. : 20°-85°C Humidity Condition : Less than 85% Mounting : Indoor (See our Model: WP-HYD-695 for outdoor weatherproof application) Manual Override : Reset Off Time : 0.5 to 45 Minutes (Adjustable) On Time : 0.5 to 10 Seconds (Adjustable) Spare Coil & Timer : Available Warranty : 1 year (as per our warranty certificate) Timer : Electrical (Adjustable)
Body : Aluminium Pressure Die Cast Bowl : CS Powder Coated Bowl from 8mm (1/4") to 25mm (1") and Aluminium Pressure Die Cast Bowl from 40mm (1½") to 65 mm (2½") Size : 8mm (1/4") to 65mm (2½") End Connection : Female Screwed (BSP) Flow Rate of SCFM : 21 to 780 Filter Element : 0.01micron Filter Element Life : Maximum 1 year depending on the usage Spare Filter Element : Available Design Pressure : 0-10kg/cm² Temperature Resistance : 65°C Media : Compressed Air Maintenance : Replace Spare Filter Element within 1 year on clogging & wash body with soapy water Warranty : 1 year (as per our warranty certificate) Efficiency : 0.01 ppm w/w maximum remaining oil content Application: Removing oil content, dust, rust and solid particles, acidic condensates, oil & hydrocarbon vapors Installation Preferred : At the entry level in each equipment/instrument/tool after Moisture Separator/Air Filter in vertical position Min. Distance Required : 6 mtrs. after compressor/air receiver tank Drainage Provision : Manually operated drainage
Body : Alluminium Pressure Die Cast Bowl : Poly Carbonate with Metal Guard Element : Sinter Bronze (20 Micron) Size : 8mm (1/4") to 25mm (1") BSP-F Pressure : 10kg/cm² Temperature : 50˚C Media : Compressed Air
Body : IC CF8 (IC-SS316/IC-SS316L available on request) Shaft : IC CF8 (IC-SS316/IC-SS316L available on request) Size : 8mm (1/4") to 50mm (2") RH/LH Seals : PTFE Carbon Pressure : Upto 8kg/cm² Temperature : Upto 50˚C RPM : 1000 RPM Media : Air/Water/Oil/Gas
Body : Aluminium Anodized Seals : NBR/Nitrile Size : 8mm (1/4") & 15mm (1/2" Voltage : 12, 24, 48, 110, 230V AC/DC Available Temperature : 5 to 55˚C Media : Compressed Air (Filtered & Lubricated) Pressure : 1 to 10kg/cm²
Barrel : Aluminium Hard Anodized End Cover : Aluminium Pressure Die Cast Seals : Hi-Nitrile Piston : Aluminium Piston Rod : EN8 with Hardchrome Bore Size Available (mm) : 32, 40, 50, 63, 80, 100, 125, 160, 200, 250 Stroke Size Aavailable (mm) : 25, 50, 80, 100, 125, 160, 200, 250, 300, 350, 400, 450, 500, 550, 600, 650, 700, 750, 800, 850, 900, 950, 1000, 1025, 1050, 1100, 1150, 1200, 1250, 1300, 1350, 1400, 1450, 1500, 1550, 1600, 1650, 1700, 1750, 1800, 1850, 1900, 1950, 2000 Working Pressure : 0.5 to 10kg/cm² Testing Pressure : Up to 12kg/cm² Temperature : Upto 80˚C Max.
Body : Aluminium Pressure Die Cast Size : 15mm (1/2") to match threads of Moisture Separator Orifice : Ø3mm Design Pressure : 0-16kg/cm² Temperature Resistance : 85°C Maintenance : Cleaning required on clogging Threads : Female Screwed (BSP) Warranty : 1 year (as per our warranty certificate) Media : Moisture from the compressed air Installation Preferred : To be installed below the Moisture Separator Drainage Provision : Mechanically operated drainage
Non Return Valves, Investment Casting, Stainless Steel Body,
Strainer, Investment Casting, Stainless Steel Body
Knife Edge Gate Valve in different MoC and Size Available
Plug Valves available in different MoC and Size
Pressure Reducing Valves available in different MoC and Size
Pneumatically Operated Butterfly Valves available in different MoC and Size
Safety Valves available in different MoC and Size
Body : Zinc Pressure Die Cast Size : 1/4" & 1/2" Pressure : 16 Bar Temperature Resistance : 50˚C Media : Compressed Air
Air Lubricator available in different size and pressure
Race Course Circle, Vadodara, Gujarat 
