Our Products
Epoxy Coatings
2 Products availableDistemper
2 Products availableFloor Cleaner
2 Products availablePrimer Paint
2 Products availableAir Freshener
1 Products availableOur offered Product range includes Cationic fixing agent, High Efficient Dispersant Protective Colloid, Unique Single Component Dispersing & Leveling of Disperse Dyes, Bonding Chemicals and Crack Filling Chemicals.
Characteristics
Applications
A. Increasing the wet fastness of direct dyes
Dyeing or prints made with direct colours often show a tendency to bleed in water. This puts serious limitation to their usefulness. ZC - DYE FIXING AGENT 50 is very effective in preventing the bleeding.
Applications ( Contd.)
The bleeding of direct colours on contact with water is due to the fact that the absorption of the dyestuff on the cellulose is reversible, so that as soon as the dyed material comes in contact with water, the dissipation of the dye molecule starts. ZC - DYE FIXING AGENT 50, which is a cationic surface active agent, unites with the dye anion, producing a more complex molecule which is insoluble or sparingly soluble. The resulting salt of the dyestuff anion and ZC - DYE FIXING AGENT 50 does not hydrolyse in contact with water and is thus 'fixed' on the fabric. Treatment of goods dyed or printed with direct colours with a dilute solution of ZC - DYE FIXING AGENT 50' has the following effects :
Fields of application :
B. Increasing the wet fastness of Reactive Dyes :
The wash fastness of reactive dyes is usually extremely good. However, bleeding of the colour is sometimes observed as the loosely held dye goes away. ZC - DYE FIXING AGENT 50 effectively fixes the loose dye and prevents the possible bleeding. Treatment with ZC - DYE FIXING AGENT 50 for fixing the reactive dyes is extremely useful under the following circumstances :-
Suagestions for use
The dyed material is dipped in 0.5 to 1 gm/lt of solution of ZC - DYE FIXING AGENT 50 at room temperature for 10-15 minutes at a bath ratio depending on the method of application.
Precautions
The effect of ZC - DYE FIXING AGENT 50 decreases in alkaline bath. It is adviseable to keep the ZC - DYE FIXING AGENT 50 solution slightly acidic before and during use by addition of acetic acid.
Highlights
Application
Properties
Application
As Plain Finish
Advantages of using ZC - WAX EMULSION N+ :-
Suggestions for use:-
ZC - WAX EMULSION N+ may be applied onto the fabric by conventional procedures by padding equipment as well as by jigger or winch. Drying, curing (when used alongwith resin finishes) and after washing may also be on the conventional equipment using conventional conditions, Fabrics treated with only ZC - WAX EMULSION N+ need not be cured
Properties
Application
As Plain Finish
Advantages of using ZC - WAX EMULSION N++
Suggestions for use:-
ZC - WAX EMULSION N++ may be applied onto the fabric by conventional procedures by padding equipment as well as by jigger or winch. Drying, curing (when used alongwith resin finishes) and after washing may also be on the conventional equipment using conventional conditions. Fabrics treated with only ZC - WAX EMULSION N++ need not be cured.
APPLICATION
Single multifunctional product for dispersing & leveling of dispersing dyes. On substrate plysters fibers, yarns and fabrics
CHEMISTRY FOR PERFORMANCE
CHEMISTRY FOR ECONOMICS
Low does level.
STORAGE ADVANTAGES:
ZC-CHEMCRYL-76 is sediment free and stable. These characteristics ensure trouble free storage and packing stability for extended periods of time.
Good mechanical shear resistance
Application
ZC-CHEMCRYL-400 is an aqueous polymer dispersion based on Styrene / Acrylates. It is compatible with cement and suitable for cement modification / cementitious compositions.
Mortars modified with ZC-CHEMCRYL-400 have good flexibility and durability as well as compressive and impact strength. ZC-CHEMCRYL-400 can also be used as crack filling and tile jointing compound by mixing with white cement
Mortars modified with ZC-CHEMCRYL-400 have good flexibility and durability as well as compressive and impact strength. ZC-CHEMCRYL-400 can also be used as crack filling and tile jointing compound by mixing with white cement
Storage
If it is kept in tightly closed containers, ZC-CHEMCRYL-400 has a shelf life of up to six months at 10 - 30º.
ZC-CHEMCRYL-76 is an aqueous polymer emulsion specially designed for cementitious compositions. Cement mortars modified with ZC-CHEMCRYL - 76 are hard, tough and durable. Compared with unmodified mortars, ZC- CHEMCRYL -76 modified mortars have superior flexural, compressive, adhesive and impact strength, as well as excellent abrasion resistance. They are especially useful where thin sections are desirable and where excessive vibration and heavy traffic are encountered.
ZC-CHEMCRYL-76 has excellent water proofing capability and widely used for water proofing of floors, rooftops, basements and maintenance of seepage and leakage. It can be used for crack filling and as tile jointing compound by mixing with white cement.
ZC-CHEMCRYL-76 modified cement mortars have excellent adhesion top a variety of surfaces such as concrete, masonry, brick, wood, metals etc. ZC- CHEMCRYL-76 modified cement mortars do not require wet curing as ZC- CHEMCRYL -76 holds the water in the system sufficient for cement curing. ZC-CHEMCRYL -76 increases workability of the mortar at one side and at the other side thin sections dry rapidly.
ZC-CHEMCRYL-76 cement mortars are resistant to many industrial chemicals, ultra violet light and heat.
STORAGE ADVANTAGES:
ZC-CHEMCRYL-76 is sediment free and stable. These characteristics ensure trouble free storage and packing stability for extended periods of time.
Good mechanical shear resistance
Uses
Features
Surface Preparation
All surfaces should be sound, clean and free of contaminants. Absorbent surfaces e.g. concrete should preferably be dampened with water. In kitchens, toilets and other wet areas all the openings should be properly sealed. On all weak points such as cracks or around the pipes use a woven fibre glass mesh as reinforcement between the two coats of ZC- ELASTOFALT
Application
ZC- ELASTOFALT can be applied by brush, roller or squeegee. Hot, dry or very porous substrate should be dampened with clean water prior to application of ZC- ELASTOFALT. When two or more coats are required, ensure that the preceding coat is fully dry before applying the successive coat, which should b e applied at right angle to proceeding coat. ZC- ELASTOFALT also acts as a non-degradable curing membrane; hence it may be applied immediately after the removal of mould, to the concrete structure, which has no aesthetic value such as the sub structure of the building.
Elastomeric Coating provides a long-lastingWaterproof Coating
Exterior masonry walls—particularly ones that are weathered—have long represented one of the most difficult maintenance challenges for the contractor, the painter, and the waterproofer alike.
Most typical exterior surfaces can be successfully protected and maintained by the regular applications of high quality conventional acrylic latex paints. But even the best paints often tend to split and fail when they have been applied over the surface cracks that develop as masonry ages
A Better Alternative: Elastomeric Wall Coatings
The construction chemical industry has known about the limitations of traditional paints on masonry. For almost that long, the industry has been searching for better alternatives. Early attempts to solve the cracking problem, involved formulating coatings with polymers not generally used in conventional paints. Many of these experimental systems provided acceptable service as dirt-resistant coatings.
Unfortunately, virtually all of the polymers tested formed hard films that were too rigid to accommodate the temperature-related fluctuation in the dimensions of the cracks. Inevitably, coatings based on these hard polymers fractured, exposing the masonry to the elements once again.
Recognizing that hard binders were not the answer, the industry turned to "softer'' polymers with much lower glass transition temperatures. Many of the products investigated were already seeing use as binders for caulks and sealants. Because they had low glass transition temperatures, they furnished excellent elasticity and flexibility over a wide range of temperatures.
ADVANTAGES:
Instead of depending on a separate, external component to impart flexibility to the film, 100% acrylic elastomeric polymers derive elasticity from a unique combination of special composition, molecular weight, and crosslinking. As a result, they retain flexibility over periods of time. Moreover, formulations based on the 100% acrylic elastomeric polymers exhibit their elastomeric properties over a broad range of temperatures. Thus, the performance of waterborne coatings based on the acrylic elastomerics remains consistently outstanding under all conditions.
In comparing the different types of binders in other areas of performance, the 100% acrylic binders have a significant edge over styrenated products in the area of ultraviolet stabiiity, over viny! acetate products in the area of hydrolysis resistance, and over both chemistries in the area of dirt pick-up resistance. As a result, on extended exposure, waterborne acrylic coatings are more resistant to chalking and do not yellow as do styrenated products. They are not as vulnerable to damage from ambient moisture as acetate-based systems, and they remain cleaner than both types of non-acrylic systems.
Protection with Decoration & Waterproof Elastomeric Exterior Coating
ZC-SEALCOAT is a unique polymer based waterproofing, elastomeric exterior performance coating to protect the concrete structure from degradation in varied climatic conditions. ZC- SEALCOAT is a single component 'Ready to Use' formulation with quick drying properties at room temperature. Its outstanding properties of water repellency coupled with toughness helps to arrest the leakage
during rainy season while its stability against UV radiation keeps the brightness unfazed for years together. Its Two in One performance protects the surface from water seepage & leakage, enhances life of plaster and provides desired aesthetical outlook.
PERFORMANCE FEATURES:-
OTHER SALIENT FEATURES
DIRECTIONS FOR USE
Surface Preparation : Remove dust, dirt, grease, loose particles, flaking paint, wax, fungus, algae from surface using wire brush. Surface should be washed with water and allowed to dry.
Priming : Apply the priming coat using recommended primer or by mixing ZC-SEALCOAT with water in the ratio of 1:2 using brush.
Finishing : Finish the surface by applying 2 coats of ZC-SEALCOAT with an intercoat interval of 4 hours.
Thinning : ZC-SEALCOAT is ready to apply paint, which does not require thinning.
Storage : Keep container closed with a tight lid when not in use. Store in dry place.
DESCRIPTION
PRIMARY USES
ADVANTAGES
Water resistant, excellent adhesion to concrete, steel, brick, stones, compatible with cement. High compressive, tensile and flexural strength. Resistant to ingress of salts, mineral oils etc. Non toxic. Suitable foruse in potable water tanks. Excellent corrosion protection. Economical when compared with epoxy mortars.
TYPICAL APPLICATONS
TERRACE / ROOF WATERPROOFING BASED ON MEMBRANE COATING SYSTEM
ZC-ROOF GFM is designed to protect surface of the building terrace & roof from water & weathering effect.
It is developed for complex/critical applications where conventional waterproofing/ weatherproofing products cannot be used or applied. In these areas waterproofing products like polymer admixtures, repellent, adhesives, general purpose coating and sealants do not perform effectively for long time. In such applications the product should withstand heat, UV effects, expansion & contraction, gravity settlements, shrinkage and ageing effects. The product should be long lasting & should remain elastomeric and active permanently.
Applications
Substrates material : Cementitious substrates, asbestos cement, insulation materials, metal substrates, wood & plywood, bricks & stones, slates & tiles, plastics, bituminous coatings, paints, mastics, asphalt & felt.
Substrate/structure types : Concrete/plastered roofs & walls, corrugated sheets, terrace gardens, parapets & chhajjas, drain sections, expansion joints, ventilation outlets, J hooks & screw overlaps, lighting fixture mountings, roofing junctions
Type of construction : Residential buildings, commercial buildings, Manufacturing units, malls, warehouses, nuclear power structures, theatres.
Components of the System :
ZC-Sealcoat :Acrylic based elastomeric high performance coating emulsion. It is single component and ready to use formulation with quick drying properties. It is water repellent with toughness to arrest leakage and seepage of water. It protects the surface of UV radiation. It has got excellent adhesion to substrate and elongation of 200%. It has very good impact strength and withstands extreme temperature.
ZC-ROOF GFM :ZC-ROOF GFM (Glass fibre matt ) is supplied by Owens Corning India Ltd. and it is made of glass fibre chopped strands. It is incorporated in this system because if the treated surface has foot traffic then plastic coating alone may not withstand the ware and tare. On the surface where no foot traffic incurs the ZC-ROOF GFM need not be applied. However it is strongly recommended to use ZC-ROOF GFM for long lasting effectiveness and toughness.
ZC-Elastofalt : ZC-Elastofalt is a thixotropic cold applied polymer modified bituminous coating. It has very high adhesion strength. It protects the surface from water & weathering effects. The elongation is 900% and forms very good film on the substrate. It can be applied on any surface except ceramic tiles & metal.
ZC-Elastoprime:ZC- Elastoprime is a primer or bond coat for surfaces like tiles or china mosaic chips. ZC-Elastofalt or ZC-Sealcoat do not easily adhere to the substrate like tiles or china mosaic chips. On such substrate it is essential to give bond coat of ZC-Elastoprime, which is actually ZC-Elastofalt diluted with water in the ratio 1:1.
Surface Preparation
Surface should be clean & dry. All the surface lying water, mould growths, moss or other vegetation, loose debris etc. should be removed prior to application. Ensure that surface is free from visible dampness, dust. Dirt and other form of contamination should be removed prior to application.
Advantages
Benefits
Nature :
Aqueous acrylic/styrene copolymer dispersion
Application :
Application : ZC-CHEMCRYL-295 is used for the production of high- gloss to matt indoor and outdoor coatings for application on plaster, masonry, asbestos cement, concrete, wood, and other substrates. Moreover, ZC-CHEMCRYL-295 is used as an impregnating agent, primer, binder for textured finishes, base material for producing pasty construction adhesives ceramic tile adhesives, and as an additive for hydraulic binders.
Storage :
When kept in tightly closed containers in a cool but frost free place, ZC-CHEMCRYL-295 can be stored for 12 months.
ZCROSS ACRYLIC DISTEMPER
ZCROSS ACRYLIC DISTEMPER is water based, interior wall paint and gives wall a delightful, attractive, matt finish that last for ages. It is an economical interior coating. It is a tested formulation with acrylic co-polymer binder, its special formulation ensures shade retention for a long time and its fast drying property facilities quicker completion of painting jobs. Acrylic distemper dries within 2-3 hours and therefore successive coats can be applied in quick time.
Packing available: 2kg, 5kg, 10kg and 20kg container
Z CROSS'S CLASSIC GOLD DISTEMPER
ZCROSS CLASSIC GOLD PREMIUM DISTEMPER is water-based, interior wall paint and gives walls a delightful, attractive, matt finish that lasts for ages. It gives as excellent, clean, and quick drying and a perfect finish. It is a tested formulation with acrylic co-polymer binder, its special formulation ensures shade retention for a long time and its fast drying property facilitates quicker completion of painting jobs. Classic Gold Premium Distemper dries within 2-3 hours and therefore successive coats can be applied in quick time.
Packing available: 2kg, 5kg, 10kg and 20kg container
CLASSIC PLASTIC EMULSION
ZCROSS'S CLASSIC PLASTIC EMULSION gives a smooth and Matt finish to the wall. A perfect buy if you have been using distemper till now. It is a premium quality, more durable and has long lasting finish. ZCROSS Plastic Emulsion is made up of top quality acrylic co-polymers, which not just gives it is superior finish and excellent coverage, but a soft silky finish.
Packing available: 1ltr, 4ltr, 10ltr and 20ltr container
ZCROSS NATURA TEXTURE
Natura textures are co-polymer based finishing for beautifying and protecting concrete structures. NATURA Textures draws inspirations from nature and transforms these exciting textures to your walls, homes and lives. It is recommended for exterior as well as interior application. NATURA Texture being water repellent, fire resistant and flexible gives better outlook with various designs along with infinte colour combination. NATURA Textures are not only simple and decorative, but also highly durable and can withstand any demotic conditions.
Packing available: 5kg and 25kg bag/container
ZCROSS WATER BASED PRIMER
ZCROSS WATER BASED PRIMER is premium acrylic primer made from cross linking polymers. It can be used for both exterior as well as interior applicable. It reduces the porosity of the surface and therefore increases the coverage of the paint. ZCROSS Water Based Primer gives a soft feel to the surface and reduces the porosity. It also protects the wall from any anti fungal and algae resistant.
Packing available: 1ltr, 4ltr, 10ltr and 20ltr container
ZCROSS CEMENTO PLAST
ZCROSS Cemento Plast is a perfect blend of white cement, high performance polymer, specific additives and mineral powder designed to obtain a fine and durable subsurface to receive all kinds of decorative paints. It can replace conventional Plaster of Paris (POP), Putty and Gypsum applications. ZCROSS Cemento Plast overcomes the shortcomings of conventional putty like firm rigidity and water sensitivity.
Packing available: 25kg, 40kg
SAFARI EXTERIOR EMULSION
ZCROSS'S Safari Exterior Emulsion is water based exterior wall finish suitable for dry to moderately humid climatic conditions. Safari Exterior Emulsion gives neat and clean shades that do not fade and last longer than cement paint shades. Currently it is available in white and different light shades.
Packing available: 1ltr, 4ltr, 10ltr and 20 ltr container
SAFARI 100% EXTERIOR EMULSION
ZCROSS'S Safari 100% Acrylic Exterior Emulsion is a water-based 100% acrylic, exterior wall finish, a high performance, long lasting exterior paint specially designed to resist saponification, U.V. degradation, etc. It also provides protection against any algae of fungal growth. It is a high sheen product.
Packing available: 1ltr, 4ltr, 10ltr and 20ltr container.
ZCROSS CRACK REPAIR
ZCROSS Crack Repair is highly flexible, asbestos free, high solid filler for major and minor cracks. It is white cement based crack filler specially developed to fill cracks in plastered surfaces. It contains finest grades of cement, sand, selected fillers and best quality polymers to give it unique properties.
The materials should be used only to fill shrinkage cracks and other small cracks in plaster. Zcross saves time and makes labour's work faster. This should not be used to fill structural cracks and construction joints. It is available in powder form.
Packing available: 1kg, 5kg and 20kg bag
Application
Application
Z CROSS ACRYLIC PASTE PUTTY
Wall Plastering has never been so easy, so in order to overcome this difficulty ZCROSS has introduced ZCROSS ACRYLIC PASTE PUTTY, ZCROSS ACRYLIC PASTE PUTTY is the ready mixed wall putty that gives your walls super smooth finish and which is faster than other ordinary putty.It is faster to prepare, apply, dry and faster to paint. It is pre-prepared and easy to apply. Being ACRYLIC based it is Primer FREE.
packing available: 20kg Bag
ZCROSS ACRYLIC POWDER PUTTY
ZCROSS ACRYLIC POWDER PUTTY is the wall putty in the powder form that gives your walls super smooth finish. It is faster to prepare, apply, dry and paint. Being ACRYLIC based it is Primer FREE. Pioneer powder putty is a perfect blend of natural minerals provided by the mother earth. It is used to application on different types of surfaces to get the smooth Pure White finishes.
Packing available: 1kg, 5kg, 20kg and 40kg Bag
Z CROSS ACRYLIC PASTE PUTTY
Wall Plastering has never been so easy, so in order to overcome this difficulty ZCROSS has introduced ZCROSS ACRYLIC PASTE PUTTY, ZCROSS ACRYLIC PASTE PUTTY is the ready mixed wall putty that gives your walls super smooth finish and which is faster than other ordinary putty.It is faster to prepare, apply, dry and faster to paint. It is pre-prepared and easy to apply. Being ACRYLIC based it is Primer FREE.
Grades available: MF and SF
Packing available: 1kg, 5kg, 20kg, 30kg and 40kg bag
Bathroom cleaner concentrate
It is specially formulated to clean all type of hard surface. Effectively remove stain and deposits from toilet bowels , urinals , washbesins, etc.
Apply:-
Normal soiling : Dilute 10-15ml in 1Ltr of water
Heavy soiling : Dilute 20-25ml in 1Ltr of water
Toilet bowel cleaner
It works well in both indian and western toilets. Safe for septic tanks. Thick formula to clean the bowel destoryes the toughest stain and leave the entite bowel sparkling and deodorised.
Apply:-
Ready to use.
Toilet bowel cleaner hard water
It removes hard water mineral build up , stubborn yellow stain and leaves the entire bowel sparkling and deodorized.
Apply:-
Ready to use.
ZCROSS'S TILE ADHESIVE
ZCROSS Tile Adhesive is a ceramic tile adhesive. It is a pre-packed cementitous tile adhesive which ensures an excellent bond on concrete, plastered and even ceramic and mosaic tile surfaces. Pioneer Tile Adhesive ensures perfect Water tightness.
Packing available: 10kg and 20kg bag
ZCROSS INTERNATIONAL
We are pleased to introduce ourselves as manufactures of Water-Based paints like Textures, Acrylic Putty, Cement Putty, Distemper, Primer, Interior and Exterior acrylic paint, tec. We also deal in Textile chemicals and other speciality chemicals and other specially chemicals. At Zcross we have an experience of 33 years and our operations are spread over 6, 000 sq.ft. area with sufficient power and other facilities. We have a dedicated team of labour and technician for purchase of raw materials, quality control, delievery and marketing. We always look for better method of manufacturing and better solution for complicated paint manufacturing. In the bussiness of manufacturing Water-Based pints, we believe in quality and customer satisfaction. We have a capacity of 8 to 10 ton manufacturing per day for texture. We are in the process of expansion for the same. We undertake bulk operations and specialized in undertaking corporate offers to cater the needs of different companies. Our sole aim is to provide exquisite and reliable quality of products that cater to the modern needs.
Craoet shampoo
It is gentle and boidegradeble blend of nuetral pH. High forming and long lasting foam agent for use in carpet rotary and dry form shampoo cleaning machines. It leaves carpet clean and pleasently fragrent.
Apply :-
Dilute:- 20-30ml im 1Ltr of water.
Spot remover
It is use too deep cleaning, spot and stain remove with renise method. It is mild alkaline gentle to carpet and upholstery.
Apply :-
Ready to use.
Stain remover
Formulated for all type of delicate and colourful fabrics. It provides effective and safe stain removal and safe for all washable and colourful fast fabrics .
Apply :-
Use stain remover directly on stain, wait for 2-3 minutes and rinse with warm water.Then just add laundry detergent and start regular laundry process.
Alfazole [low forming liquid ]
Specially formulated to protect colours. It works on stain without damaging colours, ideal for PVC carpet, washable printed wall, fireglass, vehicle seat, etc.
Apply :-
Regular use:- Dilute 20-25ml in 1Ltr water
Stain remover
Formulated for all type of delicate and colourful fabrics. It provides effective and safe stain removal and safe for all washable and colourful fast fabrics .
Apply :-
Use stain remover directly on stain, wait for 2-3 minutes and rinse with warm water.Then just add laundry detergent and start regular laundry process.
Fabric softner
It is non hazardous and biogradeble softner.It make fabric soft and gentle perfume, without damaging colour of fabric.
Apply :-
20-25 per normal lode.
Use in last resining of water.
Vehicle shampoo
it is properly balance formulae for vwhicle washing. It gives gloss shine and spot free result without affecting paint or polish of the vehicle. It contain water softness and antistic compoundwhich greatly reduce dirt atraction.
Apply :-
Two wheeler :- 05-10ml in 5ltr of water.
Four wheeler :- 15-20ml in 10-15ltr of water.
Tire shine
It is oil free formula provides protective coating on the wall sheilding. It gives non-greasy, natural shine suiatable for all rubber surface, etc.
Apply :-
Ready to use
Dash board cleaner
pH balance of anti-static agent, it reduce greasy strain, dust & dirt attraction.Keeoing dashboard clean & natural shiny, doesn't enhance sun glare.
Apply :-
Ready to use
Metal cleaner
It is clean to shine metal surface, it removes all, greasy strain and other strain, etc.
Apply :-
Ready to use