Our Products #4533072

The GX20W is a paperless recorder that includes a gateway function for ISA100 field wireless systems. The GX20W displays data from various kinds of wireless field devices, and measured data from IO modules on the main unit in real time.

By utilizing with Field Wireless Multi-Protocol Module FN310 or Field Wireless Multi-Function Module FN510, this product is connectable with a field wireless network as a field wireless device. Refer to the General Specifications of Field Wireless Multi-Protocol Module FN310 or Field Wireless Multi-Function Module FN510 for an overview and detailed information.

Field Wireless Multi-Protocol Module with Field Wireless Communication Module FN110 is connectable with a field wireless network as a field wireless device. This product acquires sensor data from a connected sensor and transmits it to a field wireless network through FN110. Refer to General Specifications of "Field Wireless Communication Module FN110" for an overview and detailed information.

The high performance temperature transmitter YTA510 accepts Thermocouple, RTD, ohms or DC mill volt inputs. The transmitters transmit not only process variables but also the setting parameters using wireless signal. The transmitters run on internal batteries, and the installation cost can be decreased since hard-wiring is not required. The communication is based on ISA100.11a protocol specifications.Detachable Antenna type model can be used with a high-gain antenna*1 with an extension cable. Ultra low current consumption design provides wireless operation for years with long life battery.

YFGW510 Field Wireless Access Point is based on wireless communications standard ISA100.11a for industrial automation of International Society of Automation (ISA). This product has backbone router function based on ISA, and combining this with Field Wireless Management Station (YFGW410) andor Field Wireless Media Converter (YFGW610) composes the field wireless system.

YTMX580 can accept inputs from up to 8 points of measurement such as thermocouples (8 types: K, E, J, etc.) or RTD signals (3 types: Pt100, etc.), converting the corresponding measurement input values to a wireless signal. It can also accept DC voltage, resistance, and 4 to 20 mA DC signal input.1

Field Wireless Media Converter YFGW610 is used for signal conversion between Field Wireless Management Station YFGW410 and Field Wireless Access Point YFGW510.