Ahmedabad, Gujarat, India
Verified
Add Review
Our Products
The auger type powder filling machine is an automatic dry powder filling machine. It is used for the filling of dry spices, coffee, milk, saffron powder in the bottles and containers.
The flat conveyor belt is moves with the required speed on the turn table.The bottles and containers are also move with the conveyor belt, fed through the separate filling head mounted on machine top plate holding of the mechanical/ pneumatic bottle holder. The bottle sensor is used to sense the bottle. The servo motor is used to rotate the things on the auger shaft. The auger fills the desired amount of the powder to the bottle. The mechanical wheel or pneumatic piston rotate and release the first bottle to conveyor. The second bottle also move with first filled bottle, which in turn get filled second time and first bottle moves further for the next operation.
SILENT FEATURES:
| MODEL | APM-ATPF-30 | APM-ATPF-60 | APM-ATPF-150 |
|---|---|---|---|
| Direction | Left To Right. | Left To Right. | Left To Right. |
| Production Rate | Fill range depending upon Bottle opening and bulk density of powder 20-30 PER min. |
Fill range depending upon Bottle opening and bulk density of powder 40-60 per min. |
Fill range depending upon Bottle opening and bulk density of powder 60-150 per min. (depending on no. of auger heads) |
| Fill Capacity | 15 gram to 100gram (with different set of Auger and funnel) Fill range depending upon Bottle opening and bulk density of powder. | 15 gram to 100gram (with different set of Auger and funnel) Fill range depending upon Bottle opening and bulk density of powder. | 15 gram to 100gram (with different set of Auger and funnel) Fill range depending upon Bottle opening and bulk density of powder. |
| Accuracy | ± 2% depending upon consistency and the Uniformity of bulk density of powder under controlled level of Humidity (i.e.35%) | ± 2% depending upon consistency and the Uniformity of bulk density of powder under controlled level of Humidity (i.e.35%) | ± 2% depending upon consistency and the Uniformity of bulk density of powder under controlled level of Humidity (i.e.35%) |
| No. of Heads | Single | Two | Multi Head (as per required.) |
| Electrical Supply | 1.00 HP For Main Drive. 0.50 HP for conveyor |
2.00 HP For Main Drive. 0.50 HP for conveyor |
0.00 HP For Main Drive. (depending on number of heads) 0.50 HP for conveyor |
| Power Requirement | 440 Volts, 3 Phase (4 wire System) 50 Hz. | 440 Volts, 3 Phase (4 wire System) 50 Hz. | 440 Volts, 3 Phase (4 wire System) 50 Hz. |
| Height of Conveyor | Adjustable from 850 To 900 MM | Adjustable from 850 To 900 MM | Adjustable from 850 To 900 MM |
| Bottle Diameter | 25 MM To 90 MM MAX. | 25 MM To 90 MM MAX. | 25 MM To 90 MM MAX. |
| Height | 55 MM To 210 MM. | 55 MM To 210 MM. | 55 MM To 210 MM. |
| Pneumatic Air | Filtered, oil free, sterile low pressure AIR at 5 kg/cm2 | Filtered, oil free, sterile low pressure AIR at 6 kg/cm2 | Filtered, oil free, sterile low |
The semi automatic cap sealing machine is fabricated on the welded steel frame. The steel frame is enclosed with the stainless steel sheet with doors. For the Rotating head the motor is given. The machine seals the cap with proper uniform torque.
HOW IT OPERATES :The manually filling containers are placed on the machine in such a way that the body and the neck are positioned below the rotating head. The uniform torque is providing to seal the cap.
THE FEATURES :Electrical Supply: Three Phase + Neutral + Earthing
Electrical Load: 0.75 KW
|
Screw Cap Specification |
Diameter** |
18 mm to 56 mm*** |
|
Height** |
15 to 20 mm |
|
|
Container Size** |
Round Shape |
Ø 22 mm to Ø 100 mm*** |
|
Flat / Square |
15mm to 100 mm (Length) |
| Out Put | 2400 to 3600 BPH � depending upon filling mtrl. & capacity |
|---|---|
| Filling Cap. | adjustable as per syringes label. |
| Bottles Ht. | 52 mm to 300 mm |
| Bottles Dia. | 25 mm to 90 mm |
| Power | 1 HP/ 1440 RPM/ 440V/ 50Hz/ 3 Phase |
