Ahmedabad, Gujarat, India
Verified
Add Review
Our Products
EXTERNAL:2MM THK
INTERNAL:2MM THK
MOC:cGMP
EXTERNAL:Buffed to matt finish
INTERNAL:Buffed to mirror finish.
All dryers have a 5 micron pre filter r at the inlet and a manually infinite adjustable damper at the outlet.
DOOR:Doors at provided at the front and / or rear side of the dryer. Door lips are lined with silicon rubber gasket to prevent any leakages. Suitable locking is provided for the doors.
HEATING:Dryers are normally supplied with either steam/ electric/ thermic fluid / hot water heating system. Suitable heating coils / caloriefiers / controlling unit are provided in the dryers.
TEMPERATURE CONTROL:Temp control system is done by electronic digital temp controller fitted in the control panel. The temp control in the dryer is fully automatic.
TRAYS:Trays are available in S.S. 304/ 316 q. All trays are fully die pressed and with coved corners. Trays are buffed to mirror finish. Trays are also available in aluminum / Polypropylene / FRP / M.S. galvanized as per clients requirements.
TROLLEY:Trolley is provided in the dryers to accommodate trays in it. Trolley trucks are used to load and unload the trays into the dryer.
CONTROL PANEL:Automatic Control panel is fitted on the side of the dryer. If consists of Starters, contactors, safety relays, CKT breakers, indicating lamps, push buttons , timers, controllers etc.
| MODELS | APM-TD-12 | APM-TD-24 | APM-TD-48 | APM-TD-96 |
|---|---|---|---|---|
| Loading capacity | 12 Trays | 24 Trays | 48 Trays | 96 Trays |
| External Dimension in mm | W D H 1370 X 530 X 940 |
W D H 1370 X 940 X 940 |
W D H 1980X1020X1880 |
W D H 3320X1900X1880 |
| Internal Dimension In mm | 840 X 430 X 840 | 840 X 860 X 840 | 1020 X930 X1830 | 1960 X930 X1830 |
| No of Doors | One | One | One | Two |
| No of Blowers | One | Two | One | Two |
| No of motors/H.P.3 PHASE 415 VOLTS. | 1/0.5 H.P.3 phase 415 volts. | 1/0.5 H.P.3 phase 415 volts | 1/1 H.P.3 phase 415 volts | 2/1 H.P.3 phase 415 volts |
The fluid bed dryers are specially designed to dry the material, uniformly at low temperature. The S.S. 304/S.S. 316 with GMP standards materials are used to fabricate the machine. The whole unit is provided with suitable motor, blower, control panel, filters and filter bag.
THE FEATURES :
| DESCRIPTION | FBD-10 | FBD-30 | FBD-60 | FBD-120 | FBD-200 | FBD-250 |
|---|---|---|---|---|---|---|
| CAPACITY OF DRYER IN KGS AT 0.6 KG/LT BULK DENSITY | 10-25 | 30-50 | 50-70 | 120-150 | 200-220 | 250-270 |
| WORKING CAPACITY OF PRODUCT CONTAINER IN LITERS | 10 | 50 | 100 | 200 | 335 | 420 |
| TOTAL VOLUME OF PRODUCT CONTAINER IN LTRS | 20 | 100 | 200 | 400 | 580 | 760 |
| BLOWER MOTOR H.P. | 2 H.P. | 5 H.P. | 10 H.P. | 15 H.P. | 20 H.P. | 20 H.P |
| HEATER LOAD | 9 K.W. | 18 K.W. | 36 K.W. | 60 K.W. | ------ | ------- |
| STEAM CONSUMPTION | 15 KGS | 25 KGS | 55 KGS | 110 KGS | 180 KGS | 240 KGS |
| HEATING CAPACITY IN KCL/HR | 8410 | 11610 | 23220 | 38700 | 77400 | 96750 |
|
LENGTH |
1250 | 1550 | 1550 | 2480 | 2500 | 2700 |
|---|---|---|---|---|---|---|
|
WIDTH |
600 | 900 | 1200 | 1400 | 2150 | 1900 |
|
HEIGHT WITH MOTOR |
1250 | 2150 | 2650 | 2950 | 3400 | 3500 |
We bring forth highly precise Tray Dryer that is used for drying and dehumidification of moist pharmaceutical samples. Our Vacuum Tray Dryer is effectual for drying different kinds of materials as they temperature ranges from 30 C to 150 C. Rotary Tray Dryers are attached with electrical heaters. Moreover, we are one of the eminent Pharmaceutical Tray Dryer Manufacturers in India.
| Temp. Range | 30 to 150 degree |
|---|---|
| Fan Cap | 1000 CFM |
| Heater | 8 Heater Electrical |
| Power | 1 HP/ 1440 RPM/ 440V/ 50Hz/ 3 Phase |
We have carved a niche as one of the famous Vibrating Fluid-bed Dryer Manufacturers and Suppliers in the country. Our Fluid Bed Dryer has HEPA Filter, and sampling port on product container. Fluid Bed Batch Dryers have automatic shaking arrangement for dehumidification of inlet air. They are attached with solid particle flow monitor and are also accessible in different capacities as per the requirement.
