Y H Tools Manufacturers

Focal Point, jalandhar, punjab

- Manufacturing from special alloy steel, these solid sine vices are fully hardened (55-60 HRC) and tempered, mounted on to a precision hinges bottom plate.

- All surfaces of the vice are precessional ground for maximum accuracy.

- These are very useful for manufacturing processes that require the highest standards of clamping accuracy at desired angles.

- Very small angles to be set with ease using standard gauge blocks.

• flame hardned bed.
• accuracy in parellelism & squareness with in 0.02/100mm.
• hardned jaw and bed maintain accuracy for long.
• unbreakable ducktile iron body.
• no work piece tilt after clamping
• all parts are interchangeble and available as spares
• tenon slots provided for effortless trueing of vice on machinetable
• The swivel baseis graduated fully through 360^o.
• Vice can be converted from swivel base to fix by removing the base
• high clamping force can be achive by effortless handle movement wich eliminates hammering on handle.

• Unbreakable steel body
• Accuracy in squareness with in 0.02mm
• No external Hydraulic Power Pack Required
• Trouble free Performance
• Extremely Easy to clamp & un-clamp.
• No hammering, no pipe locking.
• Supplied with or without swivel base
• clamping pressure 3500 kg(aprox)

FEATURES.

Modular vice designed for precision milling , grinding and widely used with CNC and statndarad milling machines.

High alloyed quality resistence steel , case hardened HRC 60(aprox) is used in all body and accesories of vice to give maximum rigidity, high performence and no wear.

Both jaw plates are in pull down angle.this ensure , during the clamping opration a down load run of the work piece against the vice base and thus a precise and safely clamping.

All components of vice are inter changealble with perfect alignment to provide diffrent work holding solutions.

The space saving design and solid construction allow a maximum blocking to total overall dimension of the vice.

Four extra tapped hole with ground back jaw rear face increase maximum opening capacity with the aditional of jaws extensions.

. clamping and releaseing is through a precision cut square thread spindle for smooth operation.

. vice spindle moves in specialy designed gun metal bush wich reduces wear this enhancing life of the vice.

. these vices are mainly used in tool manufacturing on granding , milling machines, engraving & jig boring operations.

FEATURES-

- Unbreakable ductile cast iron body.

- Jaw of vice made of special carbon steel hardened & serrated to ensure a fast non slip.

- Fully CNC machined on all bearing surfaces for smooth and trouble free oprations.

- A vailable in fixed base also

- Fine acme thread screw.

- Unbreakable SG cast iron nut can be replaced when worn.

• Body is made of graded cast iron
• High quality steel acme screw
• Hardened and accurately ground jaws
• This vice can set up at any angle with positive locking
• Upper angle base can incline from the horizontal position to the vertical position
• The entire unit may be swivelled on a base plate through 360^o
• The lower angle setting base can incline upto 45^o in both right and left directions.

Features

• Sturdy and accurately made machine vices from graded casting
• Fine acme thread screw
• Jaws are made of special steel properly hardened
• The swivel base is graduated fully through 360^o
• Vice can be converted from swivel base to fix by removing the base
• Quick alignment to machines through longitudinal slot provided in base and body
• Crank handle is made of all steel providing loaded mechanism providing positive grip.

• Parallelism of bed of vice to base 0.02/100mm
• Prepredicular accuracy of fixed jaw to base 0.04 / 100 mm
• Parallelism of top surface of fixed jaw to base 0.02/100mm
• Flatness of base 0.03mm.

Body of vice made of close grained cast iron

Positive locking to withstand heavy loads

Horizontal Swivel movement 360^o, Vertical swivel movement 90^o.

Fine acme thread screw made out of special steel.

Quick alignment to machine tables using a longitudinal slot.

Hardened and ground jaws.

Crank Handle is made of unbreakbale steel provided iwth a spring loaded mechanism.

PRECISION DRILL MACHINE VICE HEAVY DUTY

BODY OF VICE MADE FROM CLOSED GRAIN CAST IRON

V GROOVE PROVIDED IN STABLE JAW TO INSURE FIRM GRIPPING OF ROUND JOBS

SIZE AVAILABE

3", 4", 6"