Polyvinyl Chloride Pipes (PVC ) and PPR pipes can be manufactured with or without plasticizers. Examples of the former are garden hose, floor tiling and household articles. The addition of plasticizers increases material flexibility, but leads to some deterioration in other physical properties. Furthermore, some plasticizers display a tendency to migrate, escaping in the course of time so that the plastics becomes brittle. For these reasons, no pastiches are used in the manufacturer of PVC pipes for water mains and sewers. In this respect, the material is characterized as rigid PVC and this variety is termed PVC-U ( unplasticized PVC) according to ISO.

DOWNLOAD OUR LATEST CPVC CATALOGUE TECHNICAL SPECIFICATIONS AND SIZES

The strength of Fusion lies in its quality products and satisfied customers. Fusion over years has built a very large distribution network which adds to Fusion strength. Always on the look for new ideas and progress through modernization, diversification and expansion, Fusion is poised for a giant leap in the near future. We are also dedicated towards manufacturing and market Fusion PPRC, PVC, ABS, HDPE Pipes and fittings, HDPE Blow mould water tanks by understanding local conditions and specific end user requirements.

• Chemical resistant : CPVC has excellent chemical resistance to strong mineral acids and bases.

• Tough, rigid material : Fusion CPVC pipe has a much higher strength than other thermoplastics used in plumbing. This means that CPVC needs less hangers and supports and there is no unsightly looping of pipe. Fusion CPVC pipe has a higher pressure bearing capacity. This leads to the same flow rate with a smaller pipe size.
• Unaffected by chlorine in the water : Some materials may be adversely affected by chlorine contained in the water supply which can cause breakdown of the polymer chains and potential leaks. In this respect, Fusion CPVC pipe is unaffected by the chlorine present in potable water supply.
• Low thermal expansion : Fusion CPVC pipe has a lower coefficient of thermal expansion than alternative plastics, reducing the amount that the pipe expands when hot water is running, again reducing unsightly looping of the pipe.

• Superior Insulation : Fusion CPVC pipe is more energy efficient than metal pipe. As an insulator it does not lose heat the way metal pipe do, so heat loss and thermal expansion are reduced.

• Hot and Cold water compatible : Fusion CPVC pipe is compatible with both hot and cold water. It withstand very high temperature compared to any other thermoplastic plumbing systems. Many solar and electric water heaters have CPVC piping system for heat efficiency and lower installation cost. Proper installation must be followed.

• Fire Safety : CPVC has a limiting Oxygen Index of 60. Thus in air, Fusion CPVC pipe does not support combustion. No flaming drips, does not increase the fire load, low flame spread. Low smoke generation.

The large diversity of end uses makes ABS one of the most successful thermoplastics available. ABS is a copolymer of Acrylonitrile, Butadiene and Styrene, blended to give unrivaled properties, offering benefits over traditional material like metal and other plastic pipes.Acrylonitrile imparts chemical resistance ensuring the pipework does not corrode or scale. The Butadiene content endows the material with impact strength and toughness particularly at low temperatures, while the Styrene content contributes to lustre, hence extremely smooth bores, and also ensures the strength of the material.

CHLORINATED POLYVINYL CHLORIDE (CPVC) for Hot and Cold water application keeping up with modern innovations & technology involved in producing the best quality at competitive cost. Fusion CPVC pipes and fittings are most advanced for hot and cold water plumbing system giving numerous advantages like corrosion resistance, chemical resistance, fire resistance, low thermal expansion, safety for drinking water, freedom from leakages and wall dampening, lowest bacterial growth besides easy installation and cost affectivity.The strength of Fusion lies in its quality products and satisfied customers. Fusion over years has built a very large distribution network which adds to Fusion strength. Always on the look for new ideas and progress through modernization, diversification and expansion, Fusion is poised for a giant leap in the near future.

PPR pipes are manufactured from Polypropylene Random Copolymer raw material. This raw material is called Type 3. The most important feature of PPR that distinguishes it from the others is that it could also be used in hot water systems besides being used in sanitary networks. They have been marketed as an alternative to galvanized pipes and in near future they will dominate the market 100 % because of the superiorities they posses. The product has also fittings for connections. They are used for connections and they can be used in any type of transitions. There are fittings with metal parts for connections with the threaded pieces on the line. Socket welding is used as the connection method. Since the product has high welding capacity it is possible to make proper welding after 1-2 hours of training. The production is between 20 315 mm. The product could be produced in different colors.

Fusion stands tall as the most trusted and reputed brand for plastic pipes in India, now introduces Fusion blow moulded HDPE triple and Double Layer water tanks. Fusion has continued to set standards for excellence and innovation in the plastic industry with many firsts on the journey to excellence.

Fusion believes in meaningful innovations and which has gives birth to Guru & Rock Fusion water storage tanks. Advance technology coextrusion fusion water tank manufactured with advance technique co-extrusion blow molding machine which is incorporated with spiral mandrel combination system with flow differentiation design to achieve the even wall thickness throughout the tank. This gives overall strength to the structure of tank.

Monocoque body -

Light weight, well-balanced body supports stability. At Fusion, we play safe ensuring the highest standards with advanced solid Monocoque structure, making sure that there is no compromise when it comes to your Sweet Home. Supreme Airtight Threaded Lid -

• Airtight screwable lid
• Keeps water fresh
• Keeps dirt and files out
• Does not blow in windy days.

Bolder ribsFusion Water Tanks score big when if comes to looks. A bolder front ribs, muscular styling, a strong lower body that looks apart, striking new threaded lid makes it a masterpiece. Plumber friendlyMulti outlet option along with inlet and overflow configurations help plumbers in easy connection

More StrongAdvanced solid Monocoque structure with bolder ribs support stability and reduce bulging when the tank is full.

HygienicFood Grade HDPE material ensures that the water does not get contaminated when in contact with the water.

Keeps water freshSupreme airtight threaded lid ensures that the content of tank is free from dust and files.

Uniform WallThe latest evolution of blow mould technology goes a step ahead of its predecessors. It re-examines the frame structure with consistent wall thickness and thereby allows even more effective balanced weight of whole tank

The large diversity of end uses makes ABS one of the most successful thermoplastics available. ABS is a copolymer of Acrylonitrile, Butadiene and Styrene, blended to give unrivaled properties, offering benefits over traditional material like metal and other plastic pipes. Acrylonitrile imparts chemical resistance ensuring the pipework does not corrode or scale. The Butadiene content endows the material with impact strength and toughness particularly at low temperatures, while the Styrene content contributes to lustre, hence extremely smooth bores, and also ensures the strength of the material.

ABS PIPING SYSTEMS: The system is less expensive and very easy to install than metal piping; Feature superior flow to smooth interior finish; Do not rot, rust, corrode or collect waste; withstand earth loads and shipping (with proper handling); Resist mechanical damage, even at low temperatures; Performance at an operational temperature range of 40C to +60C; Are light weight (one person can load and unload): take less time to rough in than metal.

IMPACT STRENGTHFusion ABS pipe is a relatively ductile thermoplastic which exhibits very high impact strength compared to other thermoplastics particularly at moderate low temperature. TEMEPATURE RANGEA great advantage of Fusion ABS pipe over other plastic systems is its ability to perform over a wide temperature range from 40C to +80C. This makes Fusion ABS pipe very versatile and capable of handling water carrying capacity at very low temperature places to very high temperature places. ENVIRONMENTAL ADVANTAGEThe use of ABS contributes positively to the environment as it takes approximately one sixth of the energy to manufacture compared to metal products. This has direct savings in green house gas emissions. Additionally ABS is lead and chlorine free and can be readily recycled. CHEMICAL RESISTANTFusion ABS PIPE is unaffected by both internal and external chemical attack by a wide range of acids, alkalis, ground water salts and other environmental factors. Fast, simple, high integrity jointingCement Solvent welding is a simple process which produces a permanent joint of strength equal to, or exceeding, the pipe itself. No special tools, equipment, or hot work permit is required, No site down-time due to electricity shut down.

Particularly in the case of PP pipes there are several different molecular structures available on the market. In the simplest case the molecular chain is built up of one and the same repeating unit often the same as the monomer shown within the brackets). The polymer is then called homo-polymer. If instead the molecular chain is built up of two different repeating units( A and B) the polymers is called copolymer. In the case of PP the homo-polymer, often designated to PP-h, the repeating unit A is the monomer propylene. In PP copolymers, designated to PP-c, the unit B is the monomer ethylene. Dependent on how the repeating units A and B are arranged in the molecular chain, distinction is made between alternating, copolymers.Polyvinyl Chloride Pipes (PVC ) and PPR pipes can be manufactured with or without plasticizers. Examples of the former are garden hose, floor tiling and household articles. The addition of plasticizers increases material flexibility, but leads to some deterioration in other physical properties. Furthermore, some plasticizers display a tendency to migrate, escaping in the course of time so that the plastics becomes brittle. For these reasons, no pastiches are used in the manufacturer of PVC pipes for water mains and sewers. In this respect, the material is characterized as rigid PVC and this variety is termed PVC-U ( unplasticized PVC) according to ISO.

The system of fusion AirLine special is made of engineering thermoplastics Acrylonitrile-Butadiene-Styrene (ABS) with a range of performance. Advanced manufacturing techniques allow the formation of a liner layer in the pipe bore. The liner is a high performance co polymeric material which offers extra strength (because it is permanently fused with the outer, ABS layer during the extrusion process).It also help from attack if exposed to some compressor oil details is available in our technical data. If in doubt always check before installation.

Quality -

All pipes, fittings and valves are manufactured in an environment operating a quality system as per ISO 9001-2008. As part of this Quality System both raw materials and finished Fusion Air-Line Special products are subjected to rigorous quality control tests. In addition, long term pressure tests together with ageing, weathering and stressed environmental tests are carried out.

Safety -

The Butadiene constituents of fusion Air-Line affords resistance to accidental damage and prevents material fracture should the pipe be subjected to severe impact even at sub-zero temperatures. Fusion Air Line special design life of 30 years with a residual factor of safety of 2:1

Area of use - Downstream from the receiver are after cooling only. Fusion air line must not be threaded.

Technical back-up -

From manufacture to market and instalation place, Fusion Air-Line Special is supported by a team of a specialist support engineers, which is readily available to give its expert advice on any aspect of the product.

Technical Data -

Design and installation with monogram & maximum recommended flow rates, pressure temperature parameters, for compressed Air temperature and installation guide and list of compressor oil suitability all details are given in our technical

Push the pipe and the fitting into the heating tools. Once pipe and fitting are hot (after the correct time), pull out pipe and fitting very slowly, Joint the pipe & the fitting and push the pipe until it reaches the mark (that has to stay outside). During the jointing time the welded part of pipe and fitting must remain fix, without any rotation, During the cooling time, the welded part of pipe and fitting can be adjusted until cold, Fusion inspection. The outer fusion seam must be inspected. The seam must be present all around the pipe.

PPR pipes are manufactured from Polypropylene Random Copolymer raw material. This raw material is called Type 3. The most important feature of PPR that distinguishes it from the others is that it could also be used in hot water systems besides being used in sanitary networks. They have been marketed as an alternative to galvanized pipes and in near future they will dominate the market 100 % because of the superiorities they posses. The product has also fittings for connections. They are used for connections and they can be used in any type of transitions. There are fittings with metal parts for connections with the threaded pieces on the line. Socket welding is used as the connection method. Since the product has high welding capacity it is possible to make proper welding after 1-2 hours of training. The production is between 20 315 mm. The product could be produced in different colors.

Fusion stands tall as the most trusted and reputed brand for plastic pipes in India, now introduces Fusion blow moulded HDPE triple and Double Layer water tanks. Fusion has continued to set standards for excellence and innovation in the plastic industry with many firsts on the journey to excellence.Fusion believes in meaningful innovations and which has gives birth to Guru & Rock Fusion water storage tanks. Advance technology coextrusion fusion water tank manufactured with advance technique co-extrusion blow molding machine which is incorporated with spiral mandrel combination system with flow differentiation design to achieve the even wall thickness throughout the tank. This

We have also introduced Joint less Coil pipe with Flange connection for the convenience of the customer by easy installation through Flange joints. It is available in different lengths and dimensions. The length can be increased by joining the flange pipe available in 3 miters length. In this system, extension piece is to be joined at both the ends, required for pump assembly and at top for fittings assembly.

• Simple, Fast, easy bolted connection.
• Eliminates Butt Wedding.
• Eliminate socket fusion welding.
• Fast installation.
• Economical- A Union at every joint, hence reduce the cost of flange assembly.
• Easy to remove and rotate pipe for increase pipe life.
• No special tool required (Jack, Mirror, Electricity)
• Pressure: 4 Kgf to 16 Kgf.

The Yeekay Technocrat (P) Ltd. (Fusion) proud to introduce mechanical coupling system for HDPE and PPR pipe jointing system. Economy : Fusion Mechanical Coupling design and developed to reduce the cost and time for installation. It avoid flange assembly as itself is a union at every joint.
Housing : Made of durable plastic for rugged service condition.
SS Teeth : Integral gripping teeth made of stainless steel inserts and molded, provide direct connection to the pipe.
Rubber Gasket : Elastomer gasket with triple seal design provides a leak free seal.

1. EPDM : Recommended for hot water service Temperature -30C to +85C Temperature Rating -34C to +110C

2. Nitrile : Recommended for petroleum products, hydrocarbon, air with oil vapors, vegetables and mineral oil. Temperature -29C to +82C

Polyvinyl Chloride Pipes (PVC ) and PPR pipes can be manufactured with or without plasticizers. Examples of the former are garden hose, floor tiling and household articles. The addition of plasticizers increases material flexibility, but leads to some deterioration in other physical properties. Furthermore, some plasticizers display a tendency to migrate, escaping in the course of time so that the plastics becomes brittle. For these reasons, no pastiches are used in the manufacturer of PVC pipes for water mains and sewers. In this respect, the material is characterized as rigid PVC and this variety is termed PVC-U ( unplasticized PVC) according to ISO.

DOWNLOAD OUR LATEST CPVC CATALOGUE TECHNICAL SPECIFICATIONS AND SIZES

The strength of Fusion lies in its quality products and satisfied customers. Fusion over years has built a very large distribution network which adds to Fusion strength. Always on the look for new ideas and progress through modernization, diversification and expansion, Fusion is poised for a giant leap in the near future. We are also dedicated towards manufacturing and market Fusion PPRC, PVC, ABS, HDPE Pipes and fittings, HDPE Blow mould water tanks by understanding local conditions and specific end user requirements.

• Chemical resistant : CPVC has excellent chemical resistance to strong mineral acids and bases.

• Tough, rigid material : Fusion CPVC pipe has a much higher strength than other thermoplastics used in plumbing. This means that CPVC needs less hangers and supports and there is no unsightly looping of pipe. Fusion CPVC pipe has a higher pressure bearing capacity. This leads to the same flow rate with a smaller pipe size.
• Unaffected by chlorine in the water : Some materials may be adversely affected by chlorine contained in the water supply which can cause breakdown of the polymer chains and potential leaks. In this respect, Fusion CPVC pipe is unaffected by the chlorine present in potable water supply.
• Low thermal expansion : Fusion CPVC pipe has a lower coefficient of thermal expansion than alternative plastics, reducing the amount that the pipe expands when hot water is running, again reducing unsightly looping of the pipe.

• Superior Insulation : Fusion CPVC pipe is more energy efficient than metal pipe. As an insulator it does not lose heat the way metal pipe do, so heat loss and thermal expansion are reduced.

• Hot and Cold water compatible : Fusion CPVC pipe is compatible with both hot and cold water. It withstand very high temperature compared to any other thermoplastic plumbing systems. Many solar and electric water heaters have CPVC piping system for heat efficiency and lower installation cost. Proper installation must be followed.

• Fire Safety : CPVC has a limiting Oxygen Index of 60. Thus in air, Fusion CPVC pipe does not support combustion. No flaming drips, does not increase the fire load, low flame spread. Low smoke generation.

The large diversity of end uses makes ABS one of the most successful thermoplastics available. ABS is a copolymer of Acrylonitrile, Butadiene and Styrene, blended to give unrivaled properties, offering benefits over traditional material like metal and other plastic pipes.Acrylonitrile imparts chemical resistance ensuring the pipework does not corrode or scale. The Butadiene content endows the material with impact strength and toughness particularly at low temperatures, while the Styrene content contributes to lustre, hence extremely smooth bores, and also ensures the strength of the material.

CHLORINATED POLYVINYL CHLORIDE (CPVC) for Hot and Cold water application keeping up with modern innovations & technology involved in producing the best quality at competitive cost. Fusion CPVC pipes and fittings are most advanced for hot and cold water plumbing system giving numerous advantages like corrosion resistance, chemical resistance, fire resistance, low thermal expansion, safety for drinking water, freedom from leakages and wall dampening, lowest bacterial growth besides easy installation and cost affectivity.The strength of Fusion lies in its quality products and satisfied customers. Fusion over years has built a very large distribution network which adds to Fusion strength. Always on the look for new ideas and progress through modernization, diversification and expansion, Fusion is poised for a giant leap in the near future.

PPR pipes are manufactured from Polypropylene Random Copolymer raw material. This raw material is called Type 3. The most important feature of PPR that distinguishes it from the others is that it could also be used in hot water systems besides being used in sanitary networks. They have been marketed as an alternative to galvanized pipes and in near future they will dominate the market 100 % because of the superiorities they posses. The product has also fittings for connections. They are used for connections and they can be used in any type of transitions. There are fittings with metal parts for connections with the threaded pieces on the line. Socket welding is used as the connection method. Since the product has high welding capacity it is possible to make proper welding after 1-2 hours of training. The production is between 20 315 mm. The product could be produced in different colors.

Fusion stands tall as the most trusted and reputed brand for plastic pipes in India, now introduces Fusion blow moulded HDPE triple and Double Layer water tanks. Fusion has continued to set standards for excellence and innovation in the plastic industry with many firsts on the journey to excellence.

Fusion believes in meaningful innovations and which has gives birth to Guru & Rock Fusion water storage tanks. Advance technology coextrusion fusion water tank manufactured with advance technique co-extrusion blow molding machine which is incorporated with spiral mandrel combination system with flow differentiation design to achieve the even wall thickness throughout the tank. This gives overall strength to the structure of tank.

Monocoque body -

Light weight, well-balanced body supports stability. At Fusion, we play safe ensuring the highest standards with advanced solid Monocoque structure, making sure that there is no compromise when it comes to your Sweet Home. Supreme Airtight Threaded Lid -

• Airtight screwable lid
• Keeps water fresh
• Keeps dirt and files out
• Does not blow in windy days.

Bolder ribsFusion Water Tanks score big when if comes to looks. A bolder front ribs, muscular styling, a strong lower body that looks apart, striking new threaded lid makes it a masterpiece. Plumber friendlyMulti outlet option along with inlet and overflow configurations help plumbers in easy connection

More StrongAdvanced solid Monocoque structure with bolder ribs support stability and reduce bulging when the tank is full.

HygienicFood Grade HDPE material ensures that the water does not get contaminated when in contact with the water.

Keeps water freshSupreme airtight threaded lid ensures that the content of tank is free from dust and files.

Uniform WallThe latest evolution of blow mould technology goes a step ahead of its predecessors. It re-examines the frame structure with consistent wall thickness and thereby allows even more effective balanced weight of whole tank

The large diversity of end uses makes ABS one of the most successful thermoplastics available. ABS is a copolymer of Acrylonitrile, Butadiene and Styrene, blended to give unrivaled properties, offering benefits over traditional material like metal and other plastic pipes. Acrylonitrile imparts chemical resistance ensuring the pipework does not corrode or scale. The Butadiene content endows the material with impact strength and toughness particularly at low temperatures, while the Styrene content contributes to lustre, hence extremely smooth bores, and also ensures the strength of the material.

ABS PIPING SYSTEMS: The system is less expensive and very easy to install than metal piping; Feature superior flow to smooth interior finish; Do not rot, rust, corrode or collect waste; withstand earth loads and shipping (with proper handling); Resist mechanical damage, even at low temperatures; Performance at an operational temperature range of 40C to +60C; Are light weight (one person can load and unload): take less time to rough in than metal.

IMPACT STRENGTHFusion ABS pipe is a relatively ductile thermoplastic which exhibits very high impact strength compared to other thermoplastics particularly at moderate low temperature. TEMEPATURE RANGEA great advantage of Fusion ABS pipe over other plastic systems is its ability to perform over a wide temperature range from 40C to +80C. This makes Fusion ABS pipe very versatile and capable of handling water carrying capacity at very low temperature places to very high temperature places. ENVIRONMENTAL ADVANTAGEThe use of ABS contributes positively to the environment as it takes approximately one sixth of the energy to manufacture compared to metal products. This has direct savings in green house gas emissions. Additionally ABS is lead and chlorine free and can be readily recycled. CHEMICAL RESISTANTFusion ABS PIPE is unaffected by both internal and external chemical attack by a wide range of acids, alkalis, ground water salts and other environmental factors. Fast, simple, high integrity jointingCement Solvent welding is a simple process which produces a permanent joint of strength equal to, or exceeding, the pipe itself. No special tools, equipment, or hot work permit is required, No site down-time due to electricity shut down.

Particularly in the case of PP pipes there are several different molecular structures available on the market. In the simplest case the molecular chain is built up of one and the same repeating unit often the same as the monomer shown within the brackets). The polymer is then called homo-polymer. If instead the molecular chain is built up of two different repeating units( A and B) the polymers is called copolymer. In the case of PP the homo-polymer, often designated to PP-h, the repeating unit A is the monomer propylene. In PP copolymers, designated to PP-c, the unit B is the monomer ethylene. Dependent on how the repeating units A and B are arranged in the molecular chain, distinction is made between alternating, copolymers.Polyvinyl Chloride Pipes (PVC ) and PPR pipes can be manufactured with or without plasticizers. Examples of the former are garden hose, floor tiling and household articles. The addition of plasticizers increases material flexibility, but leads to some deterioration in other physical properties. Furthermore, some plasticizers display a tendency to migrate, escaping in the course of time so that the plastics becomes brittle. For these reasons, no pastiches are used in the manufacturer of PVC pipes for water mains and sewers. In this respect, the material is characterized as rigid PVC and this variety is termed PVC-U ( unplasticized PVC) according to ISO.

The system of fusion AirLine special is made of engineering thermoplastics Acrylonitrile-Butadiene-Styrene (ABS) with a range of performance. Advanced manufacturing techniques allow the formation of a liner layer in the pipe bore. The liner is a high performance co polymeric material which offers extra strength (because it is permanently fused with the outer, ABS layer during the extrusion process).It also help from attack if exposed to some compressor oil details is available in our technical data. If in doubt always check before installation.

Quality -

All pipes, fittings and valves are manufactured in an environment operating a quality system as per ISO 9001-2008. As part of this Quality System both raw materials and finished Fusion Air-Line Special products are subjected to rigorous quality control tests. In addition, long term pressure tests together with ageing, weathering and stressed environmental tests are carried out.

Safety -

The Butadiene constituents of fusion Air-Line affords resistance to accidental damage and prevents material fracture should the pipe be subjected to severe impact even at sub-zero temperatures. Fusion Air Line special design life of 30 years with a residual factor of safety of 2:1

Area of use - Downstream from the receiver are after cooling only. Fusion air line must not be threaded.

Technical back-up -

From manufacture to market and instalation place, Fusion Air-Line Special is supported by a team of a specialist support engineers, which is readily available to give its expert advice on any aspect of the product.

Technical Data -

Design and installation with monogram & maximum recommended flow rates, pressure temperature parameters, for compressed Air temperature and installation guide and list of compressor oil suitability all details are given in our technical

Push the pipe and the fitting into the heating tools. Once pipe and fitting are hot (after the correct time), pull out pipe and fitting very slowly, Joint the pipe & the fitting and push the pipe until it reaches the mark (that has to stay outside). During the jointing time the welded part of pipe and fitting must remain fix, without any rotation, During the cooling time, the welded part of pipe and fitting can be adjusted until cold, Fusion inspection. The outer fusion seam must be inspected. The seam must be present all around the pipe.

PPR pipes are manufactured from Polypropylene Random Copolymer raw material. This raw material is called Type 3. The most important feature of PPR that distinguishes it from the others is that it could also be used in hot water systems besides being used in sanitary networks. They have been marketed as an alternative to galvanized pipes and in near future they will dominate the market 100 % because of the superiorities they posses. The product has also fittings for connections. They are used for connections and they can be used in any type of transitions. There are fittings with metal parts for connections with the threaded pieces on the line. Socket welding is used as the connection method. Since the product has high welding capacity it is possible to make proper welding after 1-2 hours of training. The production is between 20 315 mm. The product could be produced in different colors.

Fusion stands tall as the most trusted and reputed brand for plastic pipes in India, now introduces Fusion blow moulded HDPE triple and Double Layer water tanks. Fusion has continued to set standards for excellence and innovation in the plastic industry with many firsts on the journey to excellence.Fusion believes in meaningful innovations and which has gives birth to Guru & Rock Fusion water storage tanks. Advance technology coextrusion fusion water tank manufactured with advance technique co-extrusion blow molding machine which is incorporated with spiral mandrel combination system with flow differentiation design to achieve the even wall thickness throughout the tank. This

We have also introduced Joint less Coil pipe with Flange connection for the convenience of the customer by easy installation through Flange joints. It is available in different lengths and dimensions. The length can be increased by joining the flange pipe available in 3 miters length. In this system, extension piece is to be joined at both the ends, required for pump assembly and at top for fittings assembly.

• Simple, Fast, easy bolted connection.
• Eliminates Butt Wedding.
• Eliminate socket fusion welding.
• Fast installation.
• Economical- A Union at every joint, hence reduce the cost of flange assembly.
• Easy to remove and rotate pipe for increase pipe life.
• No special tool required (Jack, Mirror, Electricity)
• Pressure: 4 Kgf to 16 Kgf.

The Yeekay Technocrat (P) Ltd. (Fusion) proud to introduce mechanical coupling system for HDPE and PPR pipe jointing system. Economy : Fusion Mechanical Coupling design and developed to reduce the cost and time for installation. It avoid flange assembly as itself is a union at every joint.
Housing : Made of durable plastic for rugged service condition.
SS Teeth : Integral gripping teeth made of stainless steel inserts and molded, provide direct connection to the pipe.
Rubber Gasket : Elastomer gasket with triple seal design provides a leak free seal.

1. EPDM : Recommended for hot water service Temperature -30C to +85C Temperature Rating -34C to +110C

2. Nitrile : Recommended for petroleum products, hydrocarbon, air with oil vapors, vegetables and mineral oil. Temperature -29C to +82C