Our Products
Conveyors
2 Products availableWater Treatment Accessories
2 Products availableWater Aeration System
1 Products availableChemical Machinery & Plant
1 Products availableTapes
1 Products availableIndustrial Valves
1 Products availableElectrical Cables & Wires
1 Products availableLeading Manufacturer, Supplier & Retailer of Clarifier Tanks.
Sewage sludge is highly reactive. Long-term storage may lead to septic conditions resulting in bad odors which bother not only residents. The aeration of sludge limits the formation of odors caused by anaerobic bacteria. The sludge is kept fresh. Additional treatment of the off-gas is not required. The aerator provides for effective aeration and thorough mixing of the sludge and simultaneously controls the foam layer.
Thus capital costs are reduced. In case redundancy is needed several smaller units can be used. Basically the aerator consists of drive, foam cone and impeller. The rotating impeller sucks sludge from below and air or foam from above through the foam cone and swirls the mixture of both radially to the sides.
The unique design of the Aerator makes it very sturdy and low-maintenance. There are no bearings or seals in the immerged part and all submerged parts are made of stainless steel or plastics. Aerator with Foam Control can either be mounted with a mounting bracket or on float assemblies.
Useful for poly-dosing tanks, electrolyte dosing tanks, lime dosing tanks Alum dosing tanks & other chemical & agro processes. With Crompton Greaves Motor, Elecon Gearbox agitators are available in SS 316, SS304, MS-EP, MS-FRP, MS-Rubber materials. The agitator's primary application is the processing of flowable mixtures in a low to medium viscosity range.
The step screen consists of a series of stationary and mobile steps alternating with each other. As the effluent flows through the step screen, a screening mat develops along the surface of the screen. The mobile steps progressively lift the mat of solids along the inclination of the screen. On reaching the top of the step screen, the solids are discharged by gravity into a screw conveyor or similar device. The low-inclination angle ensures that a screening mat is retained continuously during the entire operation and prevents the roll down encountered in steeper screens.
A consistent screening mat contributes to a uniform and highsolids capture rate. Step screen is capable of handling flows of up to 23, 775 gpm / 5, 400 m³/hr through a single unit.
Applications: municipal waste water treatment plants, industrial waste water treatment plants such as: paper mill, slaughterhouses, food industry, fish industry, chemical industry.
Advantages: separation of non-biodegradable solids, floating or inorganic substances, self-cleaning screen, low operating costs, available also in stainless steel tank, with nozzles.
We are offering gate valves. Gates- channel & wall mounted sluice gates, stop logs, weir gates, frp gates, mssscialuminium gates, flap gates
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union
We manufacture both varieties: Peripheral and Centrally Driven Clarifiers. Our Yashwant Clarifiers are made from Single Internal Spur Gear with Cyclo Gearbox Drive to reduce power and maintenance requirements. Yashwant Clarifiers are easy to install and provide years of hassle-free and un-interrupted service to our clients. Our design is robust and indigenous, with easily replaceable spares and top-notch after sales and maintenance services.
Our clarifiers have been installed in Industrial and Municipal Sewage Treatment Plants throughout India and up to Tank Diameters as large as 40 Meters. Our Centrally Driven Clarifier has at its heart a1200mm Diameter Spur Gear which provides prolonged service without breakdown and interruptions.
The clarifier tanks can be classified in two groups: Mechanized and Un-mechanized
Early torque ratings were based on the Lewis Beam formula, a criteria that considered tooth strength only. In the 1970's, specifications began to appear requiring that spur gear ratings be based upon AGMA standards, at that time AGMA 210 and 220 for spur gearing, and AGMA 440 for worm gearing. AGMA 210 brought durability into the rating equation. Since that time, AGMA 210 and 220 were combined into new standard AGMA 218, and later into ANSI/AGMA 2001. AGMA 440 evolved into ANSI/AGMA 6034. Throughout the evolution of Clarifiers throughout India, our gear drives have consistently evolved incorporating the best design practices and indigenous designs and concepts. Only suppliers such as us who have kept current with, and reacted to, the changing standards can truly state that their gear drives are "Designed in full conformance with required standards."
Technical Specifications:
Size Range
Types
Torque Limiters - We also provide Torque Limiters (Optional Variant) for monitoring the torque requirements of the Clarifiers with alarm facility in case of excessive torque being subjected on the clarifier drive.
Bridges & Structural Their Designing
Shaftless Spiral Conveyors follow the principle of traditional shaftless screw conveyor design. The shaftless spiral is driven by a direct drive without the need for hanger bearings. Lengths of up to 40m are achievable without hanger bearings. Our technology is in the design of a very high tensile strength spiral which allows us
to manufacture shaftless spirals of up to 700mm in diameter.
The shaftless spiral runs on either special ultra high molecular weight polyethylene liner with strong wear resistant properties. These are available with wear indicators.
Alternatively for very abrasive material such as sand/grit stainless steel bars are used. The liners are long life and easily replaceable.
The screen is typically installed in a pumping station or at the inlet of sewage or water treatment plants. The retained solids are then extracted by means of a cable driven manual raking system which lifts the solids outside the channel and discharges into a hopper.
To prevent material too coarse from reaching the travelling band screens, bar screens may be used in two stages where the first screen with wider bar spacing remove bulky solids; a second bar screen with smaller bar spacing then remove debris still coarse enough to clog travelling band screens installed downstream for finer screening.
Filtration at the first stage of sewage water intake system is done by variety of
Bar screens. Bar screens can be categorized according to various properties:
Static Screens are known for Low installation and operating cost & High capacity per unit area of screen.
Mechanical screen with rakes of bar vertical way and linear in motion. They are installed in the wastewater channel with angle of 70 - 75°. The equipment consists of screen, motorreducer, base frame, chain mechanism, rake and rake cleaning system. The motion is conveyed to the rakes with the help of the chain mechanism. Number of the rakes depends on to the depth of channel and in the consequence of the length of the screen.
The smooth running, endless track system employs a gear-driven cleaning rake to carry screenings from the submerged bar rack to a discharge chute for removal – without the use of chains, sprockets, cables or any underwater moving parts.
Applications- STP headwork: protect downstream equipment, Pumping stations; flood control; Water intake for remove large debris; Ideal for both municipal and industrial use.
Benefits : Above water operation, No submerged moving parts; Flexible & customized design, Heavy duty, wide range, Positive screening discharge.