Product Description

• Overall approx. dimension: 2170mm (L) x 1000 mm (W).
• Bed frame approx. dimension: 2080mm (L) x 910mm (W).
• Height adjustment approx. (without mattress): Minimum height 490mm to Maximum height 710mm.
• Backrest, upper leg , height and Trendelenburg / Reverse Trendelenburg adjustment on crank mechanism with separate screw mechanisms provided at leg end with stainless steel handles.
• Four section perforated mild steel CRCA sheet top.
• Framework made from mild steel ERW rectangular tubes.
• Mounted on four synthetic body castors 125mm wheel dia, two with brake and two without brake.
• Rubber buffers at four corners. Telescopic stainless steel IV pole with four locations at four corners of the bed.
• Pre-treated and powder coated finish.

Details

• Overall Approx. Dimension: 2080mm (L) x 910mm (W) X 600mm (H)
• Head & Foot Boards : Non Removable & Mild Steel Head & Foot Board.
• Bed Frame Approx. Dimension : 1980mm (L) x 910mm (W).
• Adjustable Mechanism: Crank with Separate Screw.
• Sheet Top: Uniformly perforated two section mild steel CRCA sheet top.
• Tubes: Framework made from mild steel ERW rectangular tubes.
• IV Pole: Provisions for 4 locations on bed.

Features

• Three Section top made of MS pipe with fixed Cushioned mattress.
• Height Adjustment & Back section adjustment through electric actuator system.
• Trendlenburg / Reverse Trendlenburg Positions through pneumatic pump
• Leg end section can slide under the main section.
• Provided with a pair of upholstery lithonomy position.
• SS telescopic IV Rod
• Detachable SS Tray.

Product Description

• Overall Approx. Dimension: 2020 mm (L) x 910 mm (W) X 600 mm (H).
• Head & Foot Boards: Removable ABS Panel Head & Foot Board.
• Bed Frame Approx. Dimension: 1980 mm (L) x 910 mm (W)
• Adjustable Mechanism: Crank with Separate Screw.
• Sheet Top: Uniformly perforated two section mild steel CRCA sheet top
• Tubes: Framework made from mild steel ERW rectangular tubes
• IV Pole: Provisions for 4 locations on bed.

Product Description

• Mechanically operated, uniformly perforated four sectional press bent CRCA sheet top bed
• Two fixed lever handles at foot end to obtain positions:- head raise, knee fold raise by smooth Crank mechanism.
• Precise rectangular tubular steel frame work
• Strong re-inforced, "H" shaped legs on rubber stumps
• Detachable head and foot S.S.bows with laminated panels.
• Location provided for all accessories
• Pretreated epoxy coated finish
• Wheel Extra Coast

Features

• Perforated CRC sheet top in two sections
• Backrest positions obtained by electric actuator operator by hand remote system.
• Telescopic IV Rod with Four Locations
• S.S collapsible safety side railings
• Bed mounted on 100 mm deluxe castors, two with brakes
• ABS molded head and foot bows
• Pre Treated & Epoxy Powder Coated Finish

Details

• Dimension(L*W*H) - 210 * 90 * 50-70 Centimeter (cm)
• Frame work made of rectangular M.S Tube
• MS Mattress platform in four sections
• Back Rest , Knee Rest , TB/ RTB and Hi -Lo Positions obtained by electric actuator operator by hand remote system.
• ABS molded head and foot bows
• ABS track away safety side railing
• Telescopic IV rod with two locations
• Bed Mounted on 125mm dia castor , two with brakes
• Nurse control panel.
• CPR system
• Overall Size: 210L X 90W X 50-70 H Cms
• Finish : Epoxy Powder Coated
• Castors - 2 Castors
• No. of Fold - 3

Product description

• Overall approx. dimension: 2120mm (L) x 910mm (W) X 600mm (H).
• Bed frame approx. dimension: 2080mm (L) x 910mm (W).
• Backrest, upper leg section adjusted on crank mechanism with separate screws provided at leg end with stainless steel handle.
• Calf section adjusted on ratchet mechanism.
• Uniformly perforated four section mild steel CRCA sheet top.
• Framework made from mild steel ERW rectangular tubes.
• Four on bed frame for telescopic IV pole. "H" type legs fitted with rubber shoes.
• Pre-treated and powder coated finish.

Product Description

• Overall approx. dimension: 2120mm (L) x 910mm (W) X 600mm (H).
• Bed frame approx. dimension: 2080mm (L) x 910mm (W).
• Backrest, upper leg section adjusted on crank mechanism with separate screws provided at leg end with stainless steel handle.
• Calf section adjusted on ratchet mechanism.
• Uniformly perforated four section mild steel CRCA sheet top.
• Framework made from mild steel ERW rectangular tubes
• Four locations on bed frame for telescopic IV pole.
• "H" type legs fitted with rubber shoes.
• Pre-treated and powder coated finish.

Product Description

• Overall approx. dimension: 2170mm (L) x 1000 mm (W).
• Bed frame approx. dimension: 2080mm (L) x 910mm (W).
• Height adjustment approx. (without mattress): Minimum height 490mm to Maximum height 710mm.
• Backrest, upper leg , height and Trendelenburg / Reverse Trendelenburg adjustment on crank mechanism with separate screw mechanisms provided at leg end with stainless steel handles.
• Four section perforated mild steel CRCA sheet top.
• Framework made from mild steel ERW rectangular tubes.
• Mounted on four synthetic body castors 125mm wheel dia, two with brake and two without brake.
• Rubber buffers at four corners. Telescopic stainless steel IV pole with four locations at four corners of the bed.
• Pre-treated and powder coated finish.

Details

• Overall Approx. Dimension: 2080mm (L) x 910mm (W) X 600mm (H)
• Head & Foot Boards : Non Removable & Mild Steel Head & Foot Board.
• Bed Frame Approx. Dimension : 1980mm (L) x 910mm (W).
• Adjustable Mechanism: Crank with Separate Screw.
• Sheet Top: Uniformly perforated two section mild steel CRCA sheet top.
• Tubes: Framework made from mild steel ERW rectangular tubes.
• IV Pole: Provisions for 4 locations on bed.

Features

• Three Section top made of MS pipe with fixed Cushioned mattress.
• Height Adjustment & Back section adjustment through electric actuator system.
• Trendlenburg / Reverse Trendlenburg Positions through pneumatic pump
• Leg end section can slide under the main section.
• Provided with a pair of upholstery lithonomy position.
• SS telescopic IV Rod
• Detachable SS Tray.

Product Description

• Overall Approx. Dimension: 2020 mm (L) x 910 mm (W) X 600 mm (H).
• Head & Foot Boards: Removable ABS Panel Head & Foot Board.
• Bed Frame Approx. Dimension: 1980 mm (L) x 910 mm (W)
• Adjustable Mechanism: Crank with Separate Screw.
• Sheet Top: Uniformly perforated two section mild steel CRCA sheet top
• Tubes: Framework made from mild steel ERW rectangular tubes
• IV Pole: Provisions for 4 locations on bed.

Product Description

• Mechanically operated, uniformly perforated four sectional press bent CRCA sheet top bed
• Two fixed lever handles at foot end to obtain positions:- head raise, knee fold raise by smooth Crank mechanism.
• Precise rectangular tubular steel frame work
• Strong re-inforced, "H" shaped legs on rubber stumps
• Detachable head and foot S.S.bows with laminated panels.
• Location provided for all accessories
• Pretreated epoxy coated finish
• Wheel Extra Coast

Features

• Perforated CRC sheet top in two sections
• Backrest positions obtained by electric actuator operator by hand remote system.
• Telescopic IV Rod with Four Locations
• S.S collapsible safety side railings
• Bed mounted on 100 mm deluxe castors, two with brakes
• ABS molded head and foot bows
• Pre Treated & Epoxy Powder Coated Finish

Details

• Dimension(L*W*H) - 210 * 90 * 50-70 Centimeter (cm)
• Frame work made of rectangular M.S Tube
• MS Mattress platform in four sections
• Back Rest , Knee Rest , TB/ RTB and Hi -Lo Positions obtained by electric actuator operator by hand remote system.
• ABS molded head and foot bows
• ABS track away safety side railing
• Telescopic IV rod with two locations
• Bed Mounted on 125mm dia castor , two with brakes
• Nurse control panel.
• CPR system
• Overall Size: 210L X 90W X 50-70 H Cms
• Finish : Epoxy Powder Coated
• Castors - 2 Castors
• No. of Fold - 3

Product description

• Overall approx. dimension: 2120mm (L) x 910mm (W) X 600mm (H).
• Bed frame approx. dimension: 2080mm (L) x 910mm (W).
• Backrest, upper leg section adjusted on crank mechanism with separate screws provided at leg end with stainless steel handle.
• Calf section adjusted on ratchet mechanism.
• Uniformly perforated four section mild steel CRCA sheet top.
• Framework made from mild steel ERW rectangular tubes.
• Four on bed frame for telescopic IV pole. "H" type legs fitted with rubber shoes.
• Pre-treated and powder coated finish.

Product Description

• Overall approx. dimension: 2120mm (L) x 910mm (W) X 600mm (H).
• Bed frame approx. dimension: 2080mm (L) x 910mm (W).
• Backrest, upper leg section adjusted on crank mechanism with separate screws provided at leg end with stainless steel handle.
• Calf section adjusted on ratchet mechanism.
• Uniformly perforated four section mild steel CRCA sheet top.
• Framework made from mild steel ERW rectangular tubes
• Four locations on bed frame for telescopic IV pole.
• "H" type legs fitted with rubber shoes.
• Pre-treated and powder coated finish.