• Holytek clamp carriers are very simple and most efficient equipment - with maximum rigidity and durability. Every machine has a special steel frame. large diameter shafts, heavy-duty chains, large cast iron sprockets, and an auto clamp carrier rotation cycle, all of which help to minimize operator fatigue and maximise productivity.
• Our super heavy duty clamps with zinc plated corrosion resistant, 1X2 rails and huge 7/8 screws provide super strength and durability. Clamps have a 3 high jaw and with accessories will laminate up to 6 (optional).
• The rear jaw is quickly and easily repositioned for different panel widths.
• The Pneumatic Panel Flattener is designed to hold down the stock flat while each clamp is tightened.
• Hold down bars is designed for edge gluing these panels (of less than 20mm). They prevent the boards from springing out of the clamps during tightening (optional).
• The fully Automatic Clamp carrier is the ideal labor-saving device for high production. The automatic carriage traverse from left to right, flattening panels and tightening clamps that pass on the circuit.
• Used for edge, face, assembly and laminating gluing, the ready-to-apply glues are usually alphatic and polyvinyl acetate adhesives. These glues seep through the tiny wood pares and set the remnant compound adhering quite strongly under the proper polymer specifications, solvents, heat, etc.,

• Modern design with adjustable tables in both the front and the rear
• Heavy-duty design with long, cast-iron precision tables and base.
• Tilting guide fence and easy set-up
• CM-405/500 comes with centralized, stand-up control panel
• CE-type and bridge-type safety guard are optional

• The four table rollers provide superior feeding regardless of the type of wood being processed.
• Standard start delta motor starter.
• Quick belt tension adjustment for the bottom cutterhead.
• Reversible feed for last workpiece retraction if an error occurs in the cutting process (for HK-610B, 400)
• A hand lubricator is provided of convenient lubrication to the table slideways for HK-610 and auto lubricator provided for caterpillar chain quick-ways.
• Heavy duty rigid cast-iron body and table for vibration-free running.
• The bottom cutter-headss knife can conveniently be set or changed.

Holyteks ST series Single End Tenoning Machine has many outstanding features. There s a choice of helical or straight cutterheads making these machines suitable for hard and soft materials alike. Both the to and bottom tenon heads can be either individually or simultaneously vertically adjusted. The saw mechanism is mounted in front of the tenon heads for cutting stock to the desired length. It can be adjusted vertically and can use a maximum 12 diameter blade. Additionally, there is a sawblade guard and dust filter that not only provides added operational safety but also prevents chips from entering into the dust collector. These are just a few of the excellent features Increase your efficiency and profit with the reliable ST Series from Holytek.

The Holytek spindle shaper delivers precise and vibration free shaping performance powered by a 10HP motor (option), The spindle shaper gives you powerful shaping operations with minimum trouble. There are four models to choose from. Each one is precision built throughout with fine craftsmanship that guarantees smooth and precise shaping at all times.

• Holytek clamp carriers are very simple and most efficient equipment - with maximum rigidity and durability. Every machine has a special steel frame. large diameter shafts, heavy-duty chains, large cast iron sprockets, and an auto clamp carrier rotation cycle, all of which help to minimize operator fatigue and maximise productivity.
• Our super heavy duty clamps with zinc plated corrosion resistant, 1X2 rails and huge 7/8 screws provide super strength and durability. Clamps have a 3 high jaw and with accessories will laminate up to 6 (optional).
• The rear jaw is quickly and easily repositioned for different panel widths.
• The Pneumatic Panel Flattener is designed to hold down the stock flat while each clamp is tightened.
• Hold down bars is designed for edge gluing these panels (of less than 20mm). They prevent the boards from springing out of the clamps during tightening (optional).
• The fully Automatic Clamp carrier is the ideal labor-saving device for high production. The automatic carriage traverse from left to right, flattening panels and tightening clamps that pass on the circuit.
• Used for edge, face, assembly and laminating gluing, the ready-to-apply glues are usually alphatic and polyvinyl acetate adhesives. These glues seep through the tiny wood pares and set the remnant compound adhering quite strongly under the proper polymer specifications, solvents, heat, etc.,

• Modern design with adjustable tables in both the front and the rear
• Heavy-duty design with long, cast-iron precision tables and base.
• Tilting guide fence and easy set-up
• CM-405/500 comes with centralized, stand-up control panel
• CE-type and bridge-type safety guard are optional

• The four table rollers provide superior feeding regardless of the type of wood being processed.
• Standard start delta motor starter.
• Quick belt tension adjustment for the bottom cutterhead.
• Reversible feed for last workpiece retraction if an error occurs in the cutting process (for HK-610B, 400)
• A hand lubricator is provided of convenient lubrication to the table slideways for HK-610 and auto lubricator provided for caterpillar chain quick-ways.
• Heavy duty rigid cast-iron body and table for vibration-free running.
• The bottom cutter-headss knife can conveniently be set or changed.

Holyteks ST series Single End Tenoning Machine has many outstanding features. There s a choice of helical or straight cutterheads making these machines suitable for hard and soft materials alike. Both the to and bottom tenon heads can be either individually or simultaneously vertically adjusted. The saw mechanism is mounted in front of the tenon heads for cutting stock to the desired length. It can be adjusted vertically and can use a maximum 12 diameter blade. Additionally, there is a sawblade guard and dust filter that not only provides added operational safety but also prevents chips from entering into the dust collector. These are just a few of the excellent features Increase your efficiency and profit with the reliable ST Series from Holytek.

The Holytek spindle shaper delivers precise and vibration free shaping performance powered by a 10HP motor (option), The spindle shaper gives you powerful shaping operations with minimum trouble. There are four models to choose from. Each one is precision built throughout with fine craftsmanship that guarantees smooth and precise shaping at all times.