Wooden Doors

Our offered Product range includes Plain Wooden Flush Door, Designer Wooden Flush Door, Fancy Wooden Flush Door and Commercial Wooden Flush Door.

WC flush doors are modern, elegant and ready to use that can be easily installed with minimum efforts to protect and beautify your dream home
They are made out of high quality wood to make them exceptionally durable and dimensionally stable with excellent tooling and finishing properties
Obviously, the doors are made with chemically treated seasoned hardwood battens and frames
The cross bands veneers are uniformly dried to the requisite moisture content
They are then bonded with special quality Phenol formaldehyde synthetic resin
The doors can be manufactured according to customized sizes too

Technical Details

Test	ISI Requirement	Observed Value
Dimension	Len gth, width - + 5mm, Thickness - + 1 mm	Within limits
Squareness	Deviation not more than 1mm on a length of 500mm	Deviation below 1mm
General Flatness	Twist, cupping, warping not to exceed 6mm
Local Planeness	Depth of deviation at any point to be less than 0.5mm	Within limits
Impact Indentation Test to within limits		Depth of Indentation not
Edge loading Test	Exceed 0.2mm Deflection of edge with max.	Within limits
Shock Resistance Test	No visible Defect after test	No visible defects
Buckling Test	Initial deflection - <50	Within limits
Slamming Test	No visible damage after test	No visible damage
Misuse test	No deformation after test	No deformation
Varying Humidity Test	No Visible warping, twisting no delamimination	No such defects observed
End Immersion test	No De-lamination at the end	No de-lamimination
Knife test	Minimum pass standard	Excellent
Glue Adhesion Test	No de-lamimination	No de-lamimination
Screw Withdraw Test	Load to withdraw screw to be more than 1000 N	Load - > 1000 N

Technical Details

Minimum value for conformity	Observed Value
Dimension & Squareness Test	The dimensions of nominal width and height shall be with in a limit of 5mm, the nominal thickness, shall be with in a limit of 1mm, deviation from squareness 1mm on a length of 500mm maximum variable in thickness between any two points 0.8mm