We are offering industrial robots. Rugged design of the robot. Reinforced profiles for higher load rating and longer durability. Integrated connection technology for vacuum and gripper circuits. Modularity of the robot mechanics and of the drive and control system architecture.

We are offering injection molding equipment.A wide variety of solutions with top or side entry robot.A complete range of label magazines for sizes from 30 ml up to 20 lit. Containers.Standard teachbox for all wittmann robots.Worldwide services for start-up and training.Turnkey solutions with injection molding machines.Numerous options for control and stacking.Open programming

We are offering mold temperature controller. Booster pump (for filling underpressure at temperaturesof more than 100 c) touch-screen display, 5.7", windows ce heat exchanger made ofstainless steel (incoloy heatingelement) pump and system pressuregauges maintenance free magneticallycoupled pump (standard in thetempro plus d140160180) heating control via solid state relay

We are offering chillerspowerful, compact air water cooled chillershermetically sealed quality compressorsheat exchanger-tube in tube (cu) & brazed plate (ss)large surface built air compressor with fan neckautomatic filling visual control via sight glass4 bar centrifugal pumpsantifreeze controlpressure relieve valve in cooling circuit.

Offers air-aquamold injection molding.Quality improvement.Avoidance of sink points.Reduction of frozen stresses.Reductionavoidance of warp.Reduction of the clamping force required.Reduction of cycle time.Weight reduction.Design possibilities.

We are offering industrial blender.Simple operationhighly precise metering valvesinter changeable steel hoppers"clip-on" corner windoweasily removable weigh binunifrom material blending

Optimized single loader for flexible conveying of smaller material volumes of up to 20 kgh in permanent operation.Peak performance of up to 250 kgh.Robust stainless steel constructionPolyester filter with dedustingProportional valve (Option)Remote teach pendant (Option)

Offers toggle machine.Short footprint.Extremely rigid, sturdy clamping plates and machine frame.Precise platen parallelism across the entire stroke.Low-maintenance linear guides to support the moving platen.Self-locking 5-point toggle system.Reinforced toggle bearings with low-maintenance toggle sleeves.Adhesive central oil lubrication of toggle system.High opening and closing speeds thanks to differential gears.Short dry cycle times.Flexible parts removal in three directions.High repeatability of all parameter settings.Sensitive mold safety device.Mold protection thanks to precise platen, parallelism, minimal platen eflection and linear guides.Low-maintenance and service-friendly design of all machine parts.Clamping unit tm 180 500 t.

We are offering granulator. For closed loop automatic reclamation of injection molded sprues, runners and defective parts.Low rotor speed (200 rpm @ 50 hz) for higher regrind quality, lowersound levels.Compact design with direct drive motor.Low feed height, and large top feed opening allow easy use by means ofsprue picker, conveyor belt, part separator, dumping the content of a boxor by hand.High capacity stainless steel regrind collection bin designed for vacuumevacuation.High stand with plastic bag mounted below cutting chamber for regrindcollection (option).

The combimould machine series from wittmann battenfeld offersthe complete range of solutions to meet the increasingly stringentdemands of the plastic product market on design and functionality energy-saving drive systemsthe flexible drive concept, based on double or triple pumps, permits separate, parallel injection from the injection units withhigh injection performance.Standard dfee driveelectrically adjustable (dfee) delivery pumps provide shortcycle times. The multiple pump system in the multi-componenthm allows parallel movements as standard.Servopoweroptimized use of a speed-controlled servo motor with a fixeddisplacement pump favors extremely energy-saving operation.

Offers hydraulic machine, design with extremely short footprint.Rectangular clamping platens.High rigidity and sturdiness.Precise platen parallelism maintained during the entire stroke.Moving platen support by low-maintenance linear guides.Fully hydraulic clamping system.High opening and closing speed thanks to differential circuitcentral transmission of force when moving and under clamping force.Short dry cycle times.Flexible parts removal in three directions.High repeatability of all parameters.Highly sensitive mold protection.Optimal mold protection through minimized platen deflectionand linear guides.All components with excellent serviceability and low maintenancerequirements.

We are offering eoat. End of arm tooling for robotic armscustom grippers of multiple components pickinglight weight and regid profilesmodular assembly for maximum flexibilitylocal suppports & fast delivery for sparesmaximum durability with minimum maintenance3d eoat customised design

We are offering water flow regulator. The essential device for your plastics processing machines for open and closed coolingcircuits. Flow volume is indicated in accordance with the float measuring principle: acone is lifted by the water flowing in the return of the mold circuit.

The design of the unit is based on the proven modularsystem of the flow controller series 101 and 301:2 to 12 circuits per unit (in steps of 2 circuits).flow sensor and temperature sensor are integratedin in the plastics case in a space-saving.

Robust Stainless Steel ExecutionAll components in contact with the material are made of stainless steel and are therefore perfectly suited for critical and abrasive applications.

Efficiency Enhancing InsulationThe drying hoppers are equipped with 40 mm thick insulation across the entire height in order to reduce heat losses and increase drying efficiency.

SmartFlowIntelligent Air DistributionAutomatic air distribution to adjust to different materials and fluctuating material demands.

Integrated CAN InterfaceAllows extensive data exchange and status forwarding between the dryer and a central system for visualization.

Convenient Clean Out DoorDrying hoppers of sizes 100 l and up are equipped as standard with a clean-out door ideally suited for the respective hopper diameter. The perfect geometry of the hopper guarantees uniform drying of the material across the entire cross section.

Integrated Sight GlassFor the convenient visual inspection of material flow and material level.

Material Slide GateAll drying hoppers are included as a standard with a manual slide gate.

The large easy-to-see buttons on the touch screen make it easy to operate in all types of light conditions and ensures the operator has a large surface area to make changes or adjustments in the operation of the blender.

2-Stage filtration system
In first stage pre-filtration takes place by means of the cyclone effect and in the second stage, microfiltration occursby means of a polyester microfilter.

Effective dust blow-off and user-friendlinessThe filter surface is cleaned by means of implosion, and the dust is blown into a dust collection bag.For visual inspection, the dust container is executed in robust glass.

Flow volume is indicated in accordance with the float measuring principle: a cone is lifted by the water flowing in the return of the mold circuit.


Technical Data

• Flow range per circuit: Standard 0 10 l/min. On request: AI, PVC-cones.
• Standard: Mold connections with 12 mm brass socket for 3/8" hoses.On request: Threaded connection with G 3/8" brass threaded sleeve with screwed 14 mm brass socket for 1/2" hose, or screwed 20 mm brass socket for 3/4" hose.

• Reliable WITTMANN microprocessor controller.
• Large surfaced built-in air condenser with fan neck.
• Automatic filling: visual control via sight glass.
• 3-7 bar centrifugal pumps with flow volume of 13.2 m3/hr.
• Hermetically welded quality compressor.
• Anti-freeze control.
• Pressure relieve valve in the cooling circuit

• Connection of up to 32 Battery Dryers with 240 Drying Hoppers.
• Optimized Control: Manages internal process of the dryer with failure analysis.
• Dew Point Recording: In the presence of a dew point sensor the actual values are captured and recorded over a 12 hour time period.
• Management of Material Data: Includes all drying hoppers attached to the networked dryer.
• Central Error Display: All error messages are transferred to the M7.2 control and centrally displayed.

We are offering industrial robots. Rugged design of the robot. Reinforced profiles for higher load rating and longer durability. Integrated connection technology for vacuum and gripper circuits. Modularity of the robot mechanics and of the drive and control system architecture.

We are offering injection molding equipment.A wide variety of solutions with top or side entry robot.A complete range of label magazines for sizes from 30 ml up to 20 lit. Containers.Standard teachbox for all wittmann robots.Worldwide services for start-up and training.Turnkey solutions with injection molding machines.Numerous options for control and stacking.Open programming

We are offering mold temperature controller. Booster pump (for filling underpressure at temperaturesof more than 100 c) touch-screen display, 5.7", windows ce heat exchanger made ofstainless steel (incoloy heatingelement) pump and system pressuregauges maintenance free magneticallycoupled pump (standard in thetempro plus d140160180) heating control via solid state relay

We are offering chillerspowerful, compact air water cooled chillershermetically sealed quality compressorsheat exchanger-tube in tube (cu) & brazed plate (ss)large surface built air compressor with fan neckautomatic filling visual control via sight glass4 bar centrifugal pumpsantifreeze controlpressure relieve valve in cooling circuit.

Offers air-aquamold injection molding.Quality improvement.Avoidance of sink points.Reduction of frozen stresses.Reductionavoidance of warp.Reduction of the clamping force required.Reduction of cycle time.Weight reduction.Design possibilities.

We are offering industrial blender.Simple operationhighly precise metering valvesinter changeable steel hoppers"clip-on" corner windoweasily removable weigh binunifrom material blending

Optimized single loader for flexible conveying of smaller material volumes of up to 20 kgh in permanent operation.Peak performance of up to 250 kgh.Robust stainless steel constructionPolyester filter with dedustingProportional valve (Option)Remote teach pendant (Option)

Offers toggle machine.Short footprint.Extremely rigid, sturdy clamping plates and machine frame.Precise platen parallelism across the entire stroke.Low-maintenance linear guides to support the moving platen.Self-locking 5-point toggle system.Reinforced toggle bearings with low-maintenance toggle sleeves.Adhesive central oil lubrication of toggle system.High opening and closing speeds thanks to differential gears.Short dry cycle times.Flexible parts removal in three directions.High repeatability of all parameter settings.Sensitive mold safety device.Mold protection thanks to precise platen, parallelism, minimal platen eflection and linear guides.Low-maintenance and service-friendly design of all machine parts.Clamping unit tm 180 500 t.

We are offering granulator. For closed loop automatic reclamation of injection molded sprues, runners and defective parts.Low rotor speed (200 rpm @ 50 hz) for higher regrind quality, lowersound levels.Compact design with direct drive motor.Low feed height, and large top feed opening allow easy use by means ofsprue picker, conveyor belt, part separator, dumping the content of a boxor by hand.High capacity stainless steel regrind collection bin designed for vacuumevacuation.High stand with plastic bag mounted below cutting chamber for regrindcollection (option).

The combimould machine series from wittmann battenfeld offersthe complete range of solutions to meet the increasingly stringentdemands of the plastic product market on design and functionality energy-saving drive systemsthe flexible drive concept, based on double or triple pumps, permits separate, parallel injection from the injection units withhigh injection performance.Standard dfee driveelectrically adjustable (dfee) delivery pumps provide shortcycle times. The multiple pump system in the multi-componenthm allows parallel movements as standard.Servopoweroptimized use of a speed-controlled servo motor with a fixeddisplacement pump favors extremely energy-saving operation.

Offers hydraulic machine, design with extremely short footprint.Rectangular clamping platens.High rigidity and sturdiness.Precise platen parallelism maintained during the entire stroke.Moving platen support by low-maintenance linear guides.Fully hydraulic clamping system.High opening and closing speed thanks to differential circuitcentral transmission of force when moving and under clamping force.Short dry cycle times.Flexible parts removal in three directions.High repeatability of all parameters.Highly sensitive mold protection.Optimal mold protection through minimized platen deflectionand linear guides.All components with excellent serviceability and low maintenancerequirements.

We are offering eoat. End of arm tooling for robotic armscustom grippers of multiple components pickinglight weight and regid profilesmodular assembly for maximum flexibilitylocal suppports & fast delivery for sparesmaximum durability with minimum maintenance3d eoat customised design

We are offering water flow regulator. The essential device for your plastics processing machines for open and closed coolingcircuits. Flow volume is indicated in accordance with the float measuring principle: acone is lifted by the water flowing in the return of the mold circuit.

The design of the unit is based on the proven modularsystem of the flow controller series 101 and 301:2 to 12 circuits per unit (in steps of 2 circuits).flow sensor and temperature sensor are integratedin in the plastics case in a space-saving.

Robust Stainless Steel ExecutionAll components in contact with the material are made of stainless steel and are therefore perfectly suited for critical and abrasive applications.

Efficiency Enhancing InsulationThe drying hoppers are equipped with 40 mm thick insulation across the entire height in order to reduce heat losses and increase drying efficiency.

SmartFlowIntelligent Air DistributionAutomatic air distribution to adjust to different materials and fluctuating material demands.

Integrated CAN InterfaceAllows extensive data exchange and status forwarding between the dryer and a central system for visualization.

Convenient Clean Out DoorDrying hoppers of sizes 100 l and up are equipped as standard with a clean-out door ideally suited for the respective hopper diameter. The perfect geometry of the hopper guarantees uniform drying of the material across the entire cross section.

Integrated Sight GlassFor the convenient visual inspection of material flow and material level.

Material Slide GateAll drying hoppers are included as a standard with a manual slide gate.

The large easy-to-see buttons on the touch screen make it easy to operate in all types of light conditions and ensures the operator has a large surface area to make changes or adjustments in the operation of the blender.

2-Stage filtration system
In first stage pre-filtration takes place by means of the cyclone effect and in the second stage, microfiltration occursby means of a polyester microfilter.

Effective dust blow-off and user-friendlinessThe filter surface is cleaned by means of implosion, and the dust is blown into a dust collection bag.For visual inspection, the dust container is executed in robust glass.

Flow volume is indicated in accordance with the float measuring principle: a cone is lifted by the water flowing in the return of the mold circuit.


Technical Data

• Flow range per circuit: Standard 0 10 l/min. On request: AI, PVC-cones.
• Standard: Mold connections with 12 mm brass socket for 3/8" hoses.On request: Threaded connection with G 3/8" brass threaded sleeve with screwed 14 mm brass socket for 1/2" hose, or screwed 20 mm brass socket for 3/4" hose.

• Reliable WITTMANN microprocessor controller.
• Large surfaced built-in air condenser with fan neck.
• Automatic filling: visual control via sight glass.
• 3-7 bar centrifugal pumps with flow volume of 13.2 m3/hr.
• Hermetically welded quality compressor.
• Anti-freeze control.
• Pressure relieve valve in the cooling circuit

• Connection of up to 32 Battery Dryers with 240 Drying Hoppers.
• Optimized Control: Manages internal process of the dryer with failure analysis.
• Dew Point Recording: In the presence of a dew point sensor the actual values are captured and recorded over a 12 hour time period.
• Management of Material Data: Includes all drying hoppers attached to the networked dryer.
• Central Error Display: All error messages are transferred to the M7.2 control and centrally displayed.