DESCRIPTION :The Witmans line of Compressor Oils has been specifically formulated from highly refined paraffinic base oils and "leading edge" technology additives for the lubrication of rotary and reciprocating air compressors. Each grade of Compressor Oil when used within its appropriate recommended application temperature and viscosity range, will offer the following features and benefits:
Outstanding cylinder and piston ring lubricationExcellent lubrication of timing gears and bearings in rotary compressorsHigh compressor efficiency by reducing build-up of carbon on discharge valves and inter-coolersEnhanced oil life in circulating systems and crankcasesOptimum rust, corrosion and wear protection - all grades are inhibited to help reduce rust, corrosion and wear in compressor systemsExcellent water separation aids in draining excess moisture from circulating systemsReduced sight glass staining of compressors equipped with automatic lubricatorsExcellent air/oil separation when used in flood-lubricated rotary compressorsFoam protection - Grades 32 through 220 contain an effective foam inhibitor

Applications :There are eight grades of Witmans COMPRESSOR OIL available; 32, 46, 68, 100, 150, 220, 320 & 460. COMPRESSOR OIL 32, 46 and 68 are developed especially for rotary vane and screw compressors. COMPRESSOR OIL68, 100, 150, 220, 320 and 460 are effective as "once-through" lubrication of reciprocating compressor cylinders as well as crankcases and some types of rotary compressors

itcol Rustcol RP - 1204 & Witcol Rustcol RP - 3204 are a barium-free corrosion preventives which offers cold srolled steel excellent protection in condensation, salt spray and open shed conditions.
Witcol Rustcol RP - 1204 & Witcol Rustcol RP - 3204 has good drawing properties and is also easily removed with neutral or alkaline water-based cleaners.
Witcol Rustcol RP - 1204 & Witcol Rustcol RP - 3204 are thixotropic and provides optimum film stability on vertical surface.
Witcol Rustcol RP - 1204 & Witcol Rustcol RP - 3204 protects semi-finished cold rolled steel components during transportation and sheds storage when good protection and easy removability are priorities.

APPLICATIONS:

Witcol Rustcol RP - 1204 & Witcol Rustcol RP - 3204 can be applied by dipping, spraying or rolling. Those are normally applied electrostatically to cold rolled steel. When electrostatically spraying or filtering, the temperature should not fall below 40 C.As with all thyrotrophic products, light settling can occur after longer periods of storage. If seal in the original container, Witcol Rustcol RP - 1204 & Witcol Rustcol RP - 3204 can be stired for min. 3 years at 5-40 C.

DESCRIPTION :
Witcol DL 81 is a highly chlorinated extreme pressure ( EP ) type oil with fatty oils and free sulphur making it ideally suited for most severe drawing conditions. At the drawing periphery when surface of the tube bar is in contact with the die, there is a chemical reactivity on the metal surfaces whereby a nascent metallic chloride layer of molecular thickness is formed. This feature is important in high speed drawing of steel for extending the die life and improving the surface finish.

Applications :
WITMANS Witcol DL 81 is ideally suited for cold pilfering. The high percentage of stabilized chlorine incorporated in the blend enables maximum reduction per pass, simultaneously offering a high degree of finish both internally and externally. It also ensures low wear on mandrel and dies. Witcol DL 81 is also widely used for deep drawing and cold rolling of stainless steel tubes.

Performance Benefit :
Maximum reduction per pass , High degree of internal and external finish, Low wear on mandrel and dies, Reduction in frictional heat , Close limit on wall thickness

Witcol Draw Oil is straight oil. It is a medium viscosity material formulated with mineral oil, lubricity agents, and chlorinated EP additives.

Application :

Witcol Draw Oil is excellent on stainless steel and ferrous metals. Use for drawing, forming, stamping and punching on the medium to heavy jobs. Ideal for many punching applications. Because of its EP additives and lubricity additives, many parts can go through many secondary operations without reapplying the lubricant. Recommended for materials from .040 inches thick to plate.

Performance Benefits :

Excellent on stainless steel and ferrous metals
Drawing, forming, stamping and punching
Low wear on mandrel and dies
Reduction in frictional heat
Close limit on wall thickness

Imparting Low fibre-metal dynamic friction and high filament cohesion to have good package build up and avoid overthrown ends or loops
Good Antistatic properties and Good sizing ability
Stable thermal characteristics with low fuming tendency
Ensures Non Corrosive properties and non irritating to the skin
Excellent wetting and penetration resulting uniform application
Non yellowing characteristics
Residues are water soluble and can be easily cleaned from the Godets

Witcol Spinfinish LV - 40 offered works as anti static lubricant for textile spinning applications. With balanced lubricating properties during processes like blending, drawing, carding, combing and spinning operations, it has superior fiber-to-fiber lubricity as well as features medium fiber-to-fiber static friction with good inter-fiber cohesion. The product also supports reduction of frictional differences between different fibers in blends like Polyester-Acrylic, Polyester- Viscose, Polyester-Cotton and others. Further, it can be easily removed in subsequent scouring, dyeing and finishing based operations.

SPECIAL FEATURES :

Witcol Spinfinish LV - 40 works as anti static lubricant for textile spinning applications
Balanced lubricating properties during processes like blending, drawing. Carding , combing and spinning operations.
Superior fiber-to-fiber lubricity.
Features medium fiber-to-fiber static friction with good inter-fiber cohesion
Supports reduction of frictional differences between different fibers in blends like Polyester-Acrylic, Polyester- Viscose, Polyester-Cotton and others
Superior antistatic protection in low humidity conditions
Highly effective on dyed/undyed fibers
Suitable to be used on cotton and semi worsted system
Allows easy removing in subsequent scouring, dyeing and finishing based operations

WITCOL KNITWELL is a non-staining and washable type lubricant and recommended for needle lubrication of high speed knitting machine.

ADVANTAGES :
Excellent Oxidation And Thermal Stability
Excellent Oiliness And Film Strength
Excellent Washablity & Non - Staining
High Viscosity Index

BENEFITS :
No Discoloration And Long Life
Excellent Cooling Of Needles Ensuring Extra Life
100% Fabrics Can Be Processed
Ensure Usage During All Seasons

Witcol STO 20 CE & STO - 10 are high performance lubricants for Polyester / Nylon Sewing Thread and Embroidery Yarns. These are blend of Silicone Oil Aliphatic, Synthetic Esters and high performance additives. Have excellent cohesive property & characteristic of dissipating heat generated during sewing operation.

APPLICATION:
Witcol STO 20 CE & STO - 10 are applied directly by kiss or dosing pump during final winding. Add on depends on the type of yarn and the required Sew ability.

Embroidery Yarns - 0, 5 to 2, 0%
Sewing Threads - 3, 0 to 6, 0%

WITCOL RACER 2 LOW SMOKE Motorcycle Oil is a low-ash, API TC engine oil specially designed for use in 2 - Stroke cycle motorcycles and motor scooters. It may be used in either direct oil injection or premix engines.

Advantages :

WITCOL RACER 2 LOW SMOKE is of the following quality level. API Service TC, JASO FB

CHEMICAL COMPOSITION:

WITCOL RACER 2 LOW SMOKE is specially formulated for Motorcycles, Scooters, Low-Output chain saws, Lawn-care equipment, Air-cooled 2-Strocke cycle engines.

METHOD OF PREPARATION:

Feed the Mineral Oil into the Mixing Vessel at Room Temperature. Add Conning Oil Emulsifier Package & stir well till a homogeneous mixture is obtained, after that add our Antisplash Additive, Witcol TL - 30 & stir well to get perfect Antisplash Conning Oil.

AMOUNT OF APPLICATION:

It is recommended to be used at a level of 1 % in Conning Oil formulation to avoid splashing.

BENEFITS:
Low-ash formulations help minimize engine deposits and preignition.
Minimizes piston ring sticking and helps reduce exhaust port fouling.
Protects against piston, cylinder scuffing, rust & corrosion.
Reduces spark plug fouling.
Keeps engine parts clean.
Mixes easily with gasoline at low temperatures for premix applications
Dyed for easy visibility when mixed with gasoline
Suitable for either direct oil injection or premix engines

Witmans offers a complete range of REACh COMPLIANT Rubber Process Oils. Witprol AES-200(G) grade is specially blended eco-friendly bio process oil to meet the European Union standards for noncarcinogenic rubber extender oil for tyres & non-tyre application like conveyor belts, shoes, retreads etc. Witprol AES-200(G) is highly compatible with Natural Rubber, SBR mainly upto 35 phr and also for NBR & CR upto 10 phr.

PRODUCT CHARACTERISTICS
Meets the European Union standard for noncarcinogenic rubber extender oil for tyres & non-tyre application.
Low PAH Technology.
Superior Solubility.
Excellent Compatibility.

Witcoat Red Oxide Primer is an anticorrosive primer based on Synthetic aromatic solvent and additive mixture. It has excellent durability and matt finish. It has antirust protective properties.

RECOMMENDED:

As a surface tolerant primer for the protection of interior and exterior steel in severely corrosive atmosphere. It is widely used for the protection coat for of windows frames, fences, structural steel, pipes, field machinery and storage tanks, etc from Chemical fumes, excessive heat and humidity , rain and wind.

DESCRIPTION :The Witmans line of Compressor Oils has been specifically formulated from highly refined paraffinic base oils and "leading edge" technology additives for the lubrication of rotary and reciprocating air compressors. Each grade of Compressor Oil when used within its appropriate recommended application temperature and viscosity range, will offer the following features and benefits:
Outstanding cylinder and piston ring lubricationExcellent lubrication of timing gears and bearings in rotary compressorsHigh compressor efficiency by reducing build-up of carbon on discharge valves and inter-coolersEnhanced oil life in circulating systems and crankcasesOptimum rust, corrosion and wear protection - all grades are inhibited to help reduce rust, corrosion and wear in compressor systemsExcellent water separation aids in draining excess moisture from circulating systemsReduced sight glass staining of compressors equipped with automatic lubricatorsExcellent air/oil separation when used in flood-lubricated rotary compressorsFoam protection - Grades 32 through 220 contain an effective foam inhibitor

Applications :There are eight grades of Witmans COMPRESSOR OIL available; 32, 46, 68, 100, 150, 220, 320 & 460. COMPRESSOR OIL 32, 46 and 68 are developed especially for rotary vane and screw compressors. COMPRESSOR OIL68, 100, 150, 220, 320 and 460 are effective as "once-through" lubrication of reciprocating compressor cylinders as well as crankcases and some types of rotary compressors

itcol Rustcol RP - 1204 & Witcol Rustcol RP - 3204 are a barium-free corrosion preventives which offers cold srolled steel excellent protection in condensation, salt spray and open shed conditions.
Witcol Rustcol RP - 1204 & Witcol Rustcol RP - 3204 has good drawing properties and is also easily removed with neutral or alkaline water-based cleaners.
Witcol Rustcol RP - 1204 & Witcol Rustcol RP - 3204 are thixotropic and provides optimum film stability on vertical surface.
Witcol Rustcol RP - 1204 & Witcol Rustcol RP - 3204 protects semi-finished cold rolled steel components during transportation and sheds storage when good protection and easy removability are priorities.

APPLICATIONS:

Witcol Rustcol RP - 1204 & Witcol Rustcol RP - 3204 can be applied by dipping, spraying or rolling. Those are normally applied electrostatically to cold rolled steel. When electrostatically spraying or filtering, the temperature should not fall below 40 C.As with all thyrotrophic products, light settling can occur after longer periods of storage. If seal in the original container, Witcol Rustcol RP - 1204 & Witcol Rustcol RP - 3204 can be stired for min. 3 years at 5-40 C.

DESCRIPTION :
Witcol DL 81 is a highly chlorinated extreme pressure ( EP ) type oil with fatty oils and free sulphur making it ideally suited for most severe drawing conditions. At the drawing periphery when surface of the tube bar is in contact with the die, there is a chemical reactivity on the metal surfaces whereby a nascent metallic chloride layer of molecular thickness is formed. This feature is important in high speed drawing of steel for extending the die life and improving the surface finish.

Applications :
WITMANS Witcol DL 81 is ideally suited for cold pilfering. The high percentage of stabilized chlorine incorporated in the blend enables maximum reduction per pass, simultaneously offering a high degree of finish both internally and externally. It also ensures low wear on mandrel and dies. Witcol DL 81 is also widely used for deep drawing and cold rolling of stainless steel tubes.

Performance Benefit :
Maximum reduction per pass , High degree of internal and external finish, Low wear on mandrel and dies, Reduction in frictional heat , Close limit on wall thickness

Witcol Draw Oil is straight oil. It is a medium viscosity material formulated with mineral oil, lubricity agents, and chlorinated EP additives.

Application :

Witcol Draw Oil is excellent on stainless steel and ferrous metals. Use for drawing, forming, stamping and punching on the medium to heavy jobs. Ideal for many punching applications. Because of its EP additives and lubricity additives, many parts can go through many secondary operations without reapplying the lubricant. Recommended for materials from .040 inches thick to plate.

Performance Benefits :

Excellent on stainless steel and ferrous metals
Drawing, forming, stamping and punching
Low wear on mandrel and dies
Reduction in frictional heat
Close limit on wall thickness

Imparting Low fibre-metal dynamic friction and high filament cohesion to have good package build up and avoid overthrown ends or loops
Good Antistatic properties and Good sizing ability
Stable thermal characteristics with low fuming tendency
Ensures Non Corrosive properties and non irritating to the skin
Excellent wetting and penetration resulting uniform application
Non yellowing characteristics
Residues are water soluble and can be easily cleaned from the Godets

Witcol Spinfinish LV - 40 offered works as anti static lubricant for textile spinning applications. With balanced lubricating properties during processes like blending, drawing, carding, combing and spinning operations, it has superior fiber-to-fiber lubricity as well as features medium fiber-to-fiber static friction with good inter-fiber cohesion. The product also supports reduction of frictional differences between different fibers in blends like Polyester-Acrylic, Polyester- Viscose, Polyester-Cotton and others. Further, it can be easily removed in subsequent scouring, dyeing and finishing based operations.

SPECIAL FEATURES :

Witcol Spinfinish LV - 40 works as anti static lubricant for textile spinning applications
Balanced lubricating properties during processes like blending, drawing. Carding , combing and spinning operations.
Superior fiber-to-fiber lubricity.
Features medium fiber-to-fiber static friction with good inter-fiber cohesion
Supports reduction of frictional differences between different fibers in blends like Polyester-Acrylic, Polyester- Viscose, Polyester-Cotton and others
Superior antistatic protection in low humidity conditions
Highly effective on dyed/undyed fibers
Suitable to be used on cotton and semi worsted system
Allows easy removing in subsequent scouring, dyeing and finishing based operations

WITCOL KNITWELL is a non-staining and washable type lubricant and recommended for needle lubrication of high speed knitting machine.

ADVANTAGES :
Excellent Oxidation And Thermal Stability
Excellent Oiliness And Film Strength
Excellent Washablity & Non - Staining
High Viscosity Index

BENEFITS :
No Discoloration And Long Life
Excellent Cooling Of Needles Ensuring Extra Life
100% Fabrics Can Be Processed
Ensure Usage During All Seasons

Witcol STO 20 CE & STO - 10 are high performance lubricants for Polyester / Nylon Sewing Thread and Embroidery Yarns. These are blend of Silicone Oil Aliphatic, Synthetic Esters and high performance additives. Have excellent cohesive property & characteristic of dissipating heat generated during sewing operation.

APPLICATION:
Witcol STO 20 CE & STO - 10 are applied directly by kiss or dosing pump during final winding. Add on depends on the type of yarn and the required Sew ability.

Embroidery Yarns - 0, 5 to 2, 0%
Sewing Threads - 3, 0 to 6, 0%

WITCOL RACER 2 LOW SMOKE Motorcycle Oil is a low-ash, API TC engine oil specially designed for use in 2 - Stroke cycle motorcycles and motor scooters. It may be used in either direct oil injection or premix engines.

Advantages :

WITCOL RACER 2 LOW SMOKE is of the following quality level. API Service TC, JASO FB

CHEMICAL COMPOSITION:

WITCOL RACER 2 LOW SMOKE is specially formulated for Motorcycles, Scooters, Low-Output chain saws, Lawn-care equipment, Air-cooled 2-Strocke cycle engines.

METHOD OF PREPARATION:

Feed the Mineral Oil into the Mixing Vessel at Room Temperature. Add Conning Oil Emulsifier Package & stir well till a homogeneous mixture is obtained, after that add our Antisplash Additive, Witcol TL - 30 & stir well to get perfect Antisplash Conning Oil.

AMOUNT OF APPLICATION:

It is recommended to be used at a level of 1 % in Conning Oil formulation to avoid splashing.

BENEFITS:
Low-ash formulations help minimize engine deposits and preignition.
Minimizes piston ring sticking and helps reduce exhaust port fouling.
Protects against piston, cylinder scuffing, rust & corrosion.
Reduces spark plug fouling.
Keeps engine parts clean.
Mixes easily with gasoline at low temperatures for premix applications
Dyed for easy visibility when mixed with gasoline
Suitable for either direct oil injection or premix engines

Witmans offers a complete range of REACh COMPLIANT Rubber Process Oils. Witprol AES-200(G) grade is specially blended eco-friendly bio process oil to meet the European Union standards for noncarcinogenic rubber extender oil for tyres & non-tyre application like conveyor belts, shoes, retreads etc. Witprol AES-200(G) is highly compatible with Natural Rubber, SBR mainly upto 35 phr and also for NBR & CR upto 10 phr.

PRODUCT CHARACTERISTICS
Meets the European Union standard for noncarcinogenic rubber extender oil for tyres & non-tyre application.
Low PAH Technology.
Superior Solubility.
Excellent Compatibility.

Witcoat Red Oxide Primer is an anticorrosive primer based on Synthetic aromatic solvent and additive mixture. It has excellent durability and matt finish. It has antirust protective properties.

RECOMMENDED:

As a surface tolerant primer for the protection of interior and exterior steel in severely corrosive atmosphere. It is widely used for the protection coat for of windows frames, fences, structural steel, pipes, field machinery and storage tanks, etc from Chemical fumes, excessive heat and humidity , rain and wind.