Wired Networks

Dahisar, Mumbai, Maharashtra

Fiber optic "cable" refers to the complete assembly of fibers, strength members and jacket. Fiber optic cables come in lots of different types, depending on the number of fibers and how and where it will be installed. It is important to choose cable carefully as the choice will affect how easy the cable is to install, splice or terminate and what it will cost.

The conductor is made of electrolytic grade, bright annealed bare solid copper conductor of 0.45/ 0.5 mm diameter and is insulated with a special grade polyethylene compound on the latest state-of-the-art extruders. The cores are twisted together with a uniform lay on a special purpose imported machine, according to the color code to form pairs. The pairs are bunched together in such a manner so as to minimize cross talk. The cable is then jacketed with a specially formulated PVC compound with fire retarding properties. A nylon rip cord provides an effective means of slitting the jacket without damaging the insulation. These are ideal because of low attenuation and low cross talk. Jelly Filled Telephone Cables Effective communication plays a vital role in the economic growth of any country. These cables are widely used by all telecom companies and some government organizations like BSNL, MTNL, Railways, Defence and Manufacturing units. These cables are manufactured using bright annealed, 99.97% pure base copper, imported virgin high density polyethylene, high quality poly-aluminum (APL) tape and galvanized steel tape.

These cables both in dielectric and armoured versions from 2 fibre to 96 fibres. These are manufactured by the center tube design. Compared to the conventional standard tube design used in India, the central tube design offers several advantages. Both the types Armored and unarmored cables are available.Used mostly for patch cord and backplane applications.Used for short, dry conduit runs, riser and plenum applications.

These cables both in dielectric and armoured versions from 2 fibre to 96 fibres. These are manufactured by the center tube design. Compared to the conventional standard tube design used in India, the central tube design offers several advantages. Both the types Armored and unarmored cables are available. Used mostly for patch cord and backplane applications.Used for desktop connections.

A serial cable is a cable that can be used to transfer information between two devices using serial communication, often using the RS-232 standard. Serial cables may use D-subminiature connectors with 9 or 25 pins, but other connectors are used. A specially wired cable used for connecting two similar computer serial ports directly is known as a null modem. Empirically tested combinations of bit rate, serial ports, cable type, and lengths may provide reliable communications, but generally RS 232-compatible ports are intended to be connected by at the most a few tens of metres (yards) of cable. Null modem cables

Use this cable between two DTE devices (for instance two computers)

The purpose of a null-modem cable is to permit two RS-232 DTE devices to communicate with each other without modems or other communication devices (i.e., DCE"s) between them.

These cables also support custom designed data transfer devices equipped with DB9, DB37 or DB25 ports. When trying to run a serial connection over a very long distance, it is better to use a ethernet line to do so. It will cut down on signal loss and interference. For that industry prefers following cables: RJ45 (8-pin) to DB25(M) CableRJ45 (8-pin) to DB25(F) CableRJ45 (8-pin) to DB9(M) CableRJ45 (8-pin) to DB9(F) Cable All our molded serial cables are fully populated and combine foil shield construction with a PVC jacket for durability. Thumbscrews are attached for a reliable connection.