Our Products
Cables And Wire Accessories
2 Products availableAntenna
2 Products availableFuses, Circuit Breakers & Components
2 Products availableAntenna Accessories
1 Products availableAdaptors, Plugs And Sockets
1 Products availableSockets
1 Products availableTelecommunication Equipment & System
1 Products availableWe are leaders in the market for providing best range of RF Microwave Coaxial N Connector, RF Microwave Coaxial SMA Connector, Coaxial Connector, RF Microwave Coaxial BNC Connector and Coaxial Connectors
Type RF Microwave Coaxial N Connector are classified as miniature, but are one of the largest in use. Properly designed Type N connectors provide low loss interconnects to 18 GHz. The screw type coupling combined with the larger size, i.e. RG213, provides a robust design and proper fit for some of the larger coaxial cables. Applications include broadcast electronics, aerospace, telecommunication base stations and the passive/active components used in base stations. Note : Reverse Polarity Connectors are available on special order.
Interface Dimensions
Male
Letter | Millimeters (Inches) | |
Minimum | Maximum | |
A | 1.60(.063) | 1.68(.066) |
B | 8.38(.330) | |
C | 16.00(.630) | - |
D | 0.08(.003) | - |
E | 5.33(.210) | 5.84(.230) |
F | 4.01(.158) | 4.27(.168) |
G | 4.50(.177) | |
H | 0.41(.016) | 1.52(.060) |
I | 10.11(.398) | 10.46(.412) |
Female
Letter | Millimeters (Inches) | |
Minimum | Maximum | |
A | 8.03(.316) | 8.13(.320) |
B | 8.53(.336) | 8.74(.344) |
C | 4.75(.187) | 5.26(.207) |
D | 5.33(.210) | - |
E | 10.72(.422) | - |
F | 1.19(.047) | 1.96(.077) |
G | 4.37(.172) | 5.13(.202) |
H | 3.00(.118) | 3.15(.124) |
I | 15.93(.627) | |
J | 9.04(.356) | 9.19(.362) |
Specifications
Electrical | |
Impedance | 50 ohm |
Frequency Range | 0 to 11.0 GHz |
VSWR | Straight : 1.3 max ; Right Angle : 1.5 max |
Working Voltage | 1,000 volts rms max at sea level |
Dielectric Withstanding Voltage | 2,500 volts rms max at sea level |
Contact Resistance | center contact=1.0 Milliohms max outer contact=1.0 Milliohms max |
Insertion Loss | 0.3 dB max at 10 GHz |
Insulation Resistance | 5,000 Megohms min |
Mechanical & Environmental | |
Mating | 5/8"-24 threaded coupling |
Cable Retention | RG-58,141,142,223 →40 lbs min RG-59,62A,210→40 lbs min RG-174,188,316 →20 lbs min RG-8A,9B,213,214 →80 lbs min |
Durability | 500 matings |
Coupling Nut Retention | 100 lbs min |
Temperature Range | -65C to 165C |
Vibration | MIL-STD-202 Method 204 Test Cond. B. |
Salt Spray | MIL-STD-202 Method 101 Test Cond. B. |
Thermal shock | MIL-STD-202 Method 107 Test Cond.B. |
Material
Type | Material | Plating |
Connector Body | Brass | Nickel or Silver |
Center Contact | Male:Brass, Female:Brass,Phosphor Bronze or Beryllium Copper | Gold |
Insulation | Teflon | None |
Gasket | Silicone Rubber, Rubber | None |
Crimp Ferule | Annealed Copper | Same as Body |
Note : In keeping on going product improvement, we reserve right to make product changes at any time without notice.
RF Microwave Coaxial SMA Connector are high performance subminiature connectors for microwave frequencies. The threaded coupling insures uniform contact of the outer conductors, which enables the SMA to minimize reflections and attenuation at higher frequencies while providing a high degree of mechanical strength and durability. Typical applications for SMA connectors include microwave active and passive components, instrumentation, avionics, and other high-end radio electronics. Note :Reverse Polarity Connectors are available on special order.
Interface Dimensions
Male
Letter | Millimeters (Inches) | |
Minimum | Maximum | |
A | 0.00(.000) | 0.38(.015) |
B | 0.90(.0355) | 0.94(.037) |
C | - | 4.59(.1808) |
D | 6.35(.250) | - |
E | 0.00(.000) | 0.18(.007) |
F | 0.00(.000) | 0.25(.010) |
G | - | 2.54(.100) |
H | - | 3.43(.135) |
Female
Letter | Millimeters (Inches) | |
Minimum | Maximum | |
A | 4.60(.1810) | 4.67(.1837) |
B | 5.28(.208) | 5.49(.216) |
C | 0.00(.000) | 0.18(.007) |
D | 0.00(.000) | 0.25(.010) |
E | 2.92(.115) | - |
F | 1.88(.074) | 1.98(.078) |
G | 0.38(.015) | 1.149.045) |
H | 4.32(.170) | - |
I | 5.54(.218) | - |
J | 1.24(.049) | 1.30(.051) |
Specifications
Electrical | |
Impedance | 50 ohm |
Frequency Range | 0 to 18.0 GHz - for RG-402 & RG-405 semi-rigid cable-0 to 18.0 GHz - for flexible cable→max operation frequency of cable per MIL-C-17 (12.4 GHz maz) |
VSWR | RG178U→ 1.2+0.025 f max (Straight) 1.2+0.03 f max (Right Angle) RG316U→1.15+0.02 f max (Straight) 1.15+0.03 f max (Right Angle) RG142U→ 1.15+0.01f max (Straight) 1.15+0.02 f max (Right Angle) RG402→1.05+0.01 f GHz max (Straight) 1.1+0.01 f GHz max (Right Angle) RG405→ 1.07+0.01 f GHz max (Straight) 1.1+0.01 f GHz max (Right Angle) |
Working Voltage | RG-402(.141"OD.)→500 volts rms max RG-405(.085:OD.)→335 volts rms max RG-58,141,142,223→500 volts rms max RG-174,188,316→335 volts rms max RG-178,196→250 volts rms max |
Dielectric Withstanding Voltage | RG-402(.141"OD.)→1,000 volts rms max RG-405(.085:OD.)→750 volts rms max RG-58,141,142,223→1,000 volts rms max RG-174,188,316→750 volts rms max RG-178,196→500 volts rms max |
Contact Resistance | center contact=3.0 Milliohms max outer contact=2.0 Milliohms max |
Insertion Loss | 0.06 dB max - GHz @ 6 GHz |
Insulation Resistance | 5,000 Megohms min |
Mechanical & Environmental | |
Mating | Snap-on coupling |
Durability | 500 matings |
Coupling Nut Retention | 60 lbs Min |
Recommend Nut Mating Torque | 7 to 10 inch-pounds |
Cable Retention | RG-58,141,142,223→40 lbs minRG-174,188,316 →20 lbs min |
Temperature Range | -65-C to 165-C |
Vibration | MIL-STD-202 Method 204 Test Cond. D. |
Salt Spray | MIL-STD-202 Method 101 Test Cond. B. |
Thermal shock | MIL-STD-202 Method 107 Test Cond. B |
Material
Type | Material | Plating |
Connector Body | Brass | Nickel or Gold |
Center Contact | Male:Brass Female:Beryllium Copper | 50 - " gold over 100 - " nickel 50 - " gold over 100 - " nickel |
Insulation | Teflon | None |
Gasket | Silicone Rubber | None |
Crimp Ferule | Annealed Copper | Nickel or Gold |
Reverse Polarity Sma Interface
Note : In keeping on going product improvement, we reserve right to make product changes at any time without notice.
RF Microwave Coaxial BNC Connector are small, lightweight, weatherproof miniature connectors that are the most popular connector series used in a variety of RF applications. The two stud bayonet coupling system of the BNC yields an easy-to-use, quick connecting/disconnecting device that accounts for the BNC's popularity. These connectors are manufactured to MIL-PRF-39012 requirements and are typically used in applications operating up to 4 GHz. BNC connectors are used in data networking as well as video, audio and test equipment application. Video applications such as security systems use 75 versions to match the standard system impedance. Note : Reverse Polarity Connectors are available on special order.
Garph
Male
Letter | Millimeters (Inches) | ||
Minimum | Maximum | ||
A | 1.32 (.052) | 1.37(.054 | |
B | 4.83 (.190) | - | |
C | Slotted and flared to Meet Electrical and Mechanical Requirement | ||
D | 9.78 (.385) | 9.91 (.390) | |
E | 0.08 (.003) | - | |
F | 5.28 (.208) | 5.79 (.228) | |
G | 5.33 (.210) | 5.84 (230) | |
H | 0.15 (.006) | - | |
I | 1.98 (.078) | - | |
J | 2.06 (.081) | 2.21 (.087) |
Female
Letter | Millimeters (Inches) | |
Minimum | Maximum | |
A | - | 4.72 (.186) |
B | 8.10 (.319) | 8.15 (.321) |
C | 8.31 (.327) | 8.46 (.333) |
D | 9.60 (.378) | 9.70 (.382) |
E | 10.97 (.432) | 11.07 (.436) |
F | 5.18 (.204) | 5.28 (.208) |
G | 1.91 (0.75) | 2.06 (.081) |
H | 8.31 (.327) | 8.51 (.335) |
I | - | 0.15 (.006) |
J | 4.72 (.186) | 5.23 (.206) |
K | 4.78 (.188) | 5.28 (.208) |
L | 4.95 (.195) | - |
M | 10.52 (.414) | - |
N | 2.06 (.081) | 2.21 (.087) |
Specifications
Electrical | |
Impedance | 50 ohm 75 ohm |
Frequency Range | 0 to 4.0 GHz 0 to 1 Ghz |
VSWR | Straight : 1.3 max; Right Angle : 1.35 max |
Working Voltage | 500 volts rms max at sea level |
Dielectric with standing voltage | 1500 volts rms |
Contact Resistance | Center contact = 1.5 milliohms max outer contact = 1.0 milliohms max |
Insertio Loss | 0.2 dB max @ 3GHz |
Insulation resistance | 5,000 Megohms min |
Mechanical & Environmental | |
Mating | Two stud bayonet coupling |
Durability | 500 matings |
Coupling Nut Retention | 100 lbs min |
Cable Retention | RG-58,141,142,223 → 40 lbs min RG-59,62A,210→ 40 lbs min RG-174,188,316 → 20 lbs min RG-179B,187A → 20 lbs min |
Temperature Range | -65°C to 165°C |
Vibration | MIL-STD-202 Method 204 Test Cond. B. |
Salt Spray | MIL-STD-202 Method 101 Test Cond. B. |
Thermal shock | MIL-STD-202 Method 107 Test Cond. B. |
Material
Type | Material | Plating |
Connector Body | Brass | Nickel or Gold |
Center Contact | Male:Brass Female:Brass, Phosphor Bronze orBeryllium Copper | Gold Gold |
Insulation | Teflon or Delrin | None |
Gasket | Silicone Rubber, Rubber | None |
Crimp Ferule | Annealed Copper | Same as Body |
Garph
Note : In keeping on going product improvement, we reserve right to make product changes at any time without notice.
RF Microwave Coaxial S Connector are miniature connectors that are similar to the RF Microwave Coaxial S Connector, but use a threaded coupling arrangement. The stability of the threaded coupling allows the connector to be used up to 11 Ghz and provides improved resistance to adverse environments including vibration, moisture, corrosion and thermal variations. These connectors are manufactured to MIL-PRF-39012 requirements. Typical applications include mobile communications, avionics and antenna ports for wireless base units. Reverse Polarity designs available for FCC Part 15. Note : Reverse Polarity Connectors are available on special order.
Interface Dimensions
Male
Letter | Millimeters (Inches) | |
Minimum | Maximum | |
A | 2.06(.081) | 2.21(.087) |
B | 1.32(.052) | 1.37(.054) |
C | 4.83(.190) | - |
D | Slotted and Flared To Meet Electrical And Mechanical Requirements |
|
E | 11.18(.440) | - |
F | 0.15(.006) | - |
G | - | 1.98(.078) |
H | 5.28(.208) | 5.79(.228) |
I | 5.33(.210) | - |
J | 0.08(.003) | 1.02(.040) |
K | 1.60(.063) | - |
L | 3.96(.156) | - |
M | 1.98(.078) | - |
Female
Letter | Millimeters (Inches) | |
Minimum | Maximum | |
A | - | 4.72(.186) |
B | 8.10(.319) | 8.15(.321) |
C | 8.31(.327) | 8.46(.333) |
D | 9.60(.378) | 9.68(.381) |
E | 1.73(.068) | 2.24(.088) |
F | 8.31(.327) | 8.51(.335) |
G | 10.52(.414) | - |
H | 4.75(.187) | - |
I | - | 0.15(.006) |
J | 4.72(.186) | 5.23(.206) |
K | 4.95(.195) | - |
L | 4.78(.188) | 5.28(.208) |
Specifications
Electrical | |
mpedance | 50 ohm 75 ohm |
Frequency Range | 0 to 11.0 GHz 0 to 1.0 GHz |
VSWR | Straight : 1.3 max ; Right Angle : 1.35 max |
Working Voltage | 500 volts rms max at sea level |
Dielectric Withstanding Voltage | 1,500 volts rms max at sea level |
Contact Resistance | center contact=1.5 Milliohms max outer contact=1.0 Milliohms max |
Insertion Loss | 0.2 dB max @ 3 GHz |
Insulation Resistance | 5,000 Megohms min |
Mechanical & Environmental | |
Mating | 7/16"-28 threaded coupling |
Cable Retention | RG-58,141,142,223 →40 lbs min RG-59,62A,210→40 lbs min RG-174,188,316 →20 lbs min |
Durability | 500 matings |
Coupling Nut Retention | 100 lbs min |
Temperature Range | -65-C to 165-C |
Vibration | MIL-STD-202 Method 204 Test Cond. B. |
Salt Spray | MIL-STD-202 Method 101 Test Cond. B. |
Thermal shock | MIL-STD-202 Method 107 Test Cond. B. |
Material
Type | Material | Plating |
Connector Body | Brass | Nickel or Silver |
Center Contact | Male: BrassFemale: Brass,Phosphor Bronze or Beryllium Copper | Gold |
Insulation | Teflon or Delrin | None |
Gasket | Silicone Rubber, Rubber | None |
Crimp Ferule | Annealed Copper | Nickel or Silver |
Reverse Polarity TNC
Note : In keeping on going product improvement, we reserve right to make product changes at any time without notice.
Electrical Characteristics
Impedance | 75 Ohm |
---|---|
Operating frequency | DC-1 GHz |
VSWR-Value Straight connector flexible cable Angle connector flexible cable | <1,12 bei 1 GHz <<1,15 bei 1 GHz |
Operating voltage (depends on cable type) | ≥ 1000 V / 50 Hz |
Withstand Voltage | AC ≤ 500 V for 1 minute |
Insulation Resistance | 100 M Ohm at DC 500V |
Contact resistance Center contact Outer contact | ≤ 2,5 mOhm ≤ 1 mOhm |
Mechanical Characteristics
Insertion force | Before test or initial: 0.5 kg to 2 kg After Life test : 0.3 kg to 2 kg. | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Extraction force | Before test or initial: 0.4 kg to 2 kg After Life test : 0.3 kg to 2 kg. | ||||||||||
Mating cycles (Endurance) | > 1000 | ||||||||||
Materials & Plating
|
The RF Microwave Coaxial PAL Connector are push pull interface style which provides a rapid connection.This connector range is suitable for the standard ranges of flexible cables and is also available in panel / chassis mount versions. The characteristic impedance of the PAL coaxial connectors is 75 ohm.
Electrical Characteristics
Impedance | 75 Ohm |
---|---|
Operating frequency | DC-1 GHz |
VSWR-Value Straight connector flexible cable Angle connector flexible cable |
<1,12 bei 1 GHz <<1,15 bei 1 GHz |
Operating voltage (depends on cable type) | ≥ 1000 V / 50 Hz |
Withstand Voltage | AC ≤ 500 V for 1 minute |
Insulation Resistance | 100 M Ohm at DC 500V |
Contact resistance Center contact Outer contact |
≤ 2,5 mOhm ≤ 1 mOhm |
Mechanical Characteristics
Insertion force | Before test or initial: 0.5 kg to 2 kg After Life test : 0.3 kg to 2 kg. |
---|---|
Extraction force | Before test or initial: 0.4 kg to 2 kg After Life test : 0.3 kg to 2 kg. |
Mating cycles (Endurance) | > 1000 |
Materials & Plating
Housing | Brass -- Nickel Plated |
Center contact | Brass -- Nickel Plated (Silver Plated for special order) |
Other metal parts | Brass -- Nickel Plated |
Crimp ferrule | Copper -- Nickel Plated |
Insulator | Delrin |
The RF Microwave Coaxial F Connector is a common means of connecting television signals. It is a type of coaxial RF connector commonly used for "over the air" terrestrial television, cable television and universally for satellite television and cable modems, usually with RG-6/U cable or, in older installations, with RG-59/U cable. The F connector is inexpensive, yet has good 75 Ω impedance match up to 1 GHz and has usable bandwidth up to several GHz.
Technical Specifications
F Receptacles | |
Impedance | 75 Ω |
RF Leakage | -100 dB min. @ 1 GHz |
Temperature Range | S-40oF to +140oF (-40oC to +60oC) |
F Bulkhead Jacks | |
Impedance | 75 Ω |
Frequency Range | 0-1 GHz |
RF Leakage | -100 dB min @ 1GHz |
Temperature Range | S-40oF to +140oF (-40oC to +60oC) |
Coupling Nuts and Bodies | Brass |
Contact | Brass / ( Phosphor Bronze – on made to order) |
Ferrule | Brass |
Insulator | Polypropylene / Delrin |
Plating | Body : Nickel Contact : Silver / Gold Ferrule : Nickel |
Mating | 3/8-32 threaded |
Cable Attachment | External clamp ring or Hex braid-crimp |
Cable Retention | 20lb. min. |
F Adapters | |
Impedance | 75 Ω |
RF Leakage | -100 dB min. @ 1 GHz |
Temperature Range | S-40oF to +140oF (-40oC to +60oC) |