Compact Solution

Because they are compact, 45 mm wide and available in up to 38 A (18.5 kW @ 400 V), CWB contactors lead to an overall reduction in size of electric panels if compared to traditional solutions of contactors with the same ratings.

View Complete Details

Ask Latest Price & Details

MW500 Decentralized Drive

Power range: 0.75 to 3.7 kW (1.0 to 5.0 HP)Three-phasePower supply voltage: 200-240 V and 380-480 VScalar Control(VF) and Vector Control(VVW)Overload capacity: 150% current in 60 sec.RFI Filter built-in (accessory)Switch-Disconnector built-In (optional)Analog Potentiometer and LED for status indicator built-InAmbient temperature -10 C up to 50 C (14 F up to 122 F)All the electronic boards are conformally coated classified as 3C2 according to IEC 60721-3-3 standardProtection Degree IP66NEMA 4XSoftPLC function built-inPlug-in modules: IOs, USB and fieldbus communication (same as CFW500)Flash memory module: In few seconds, it is possible to download the programming from a MW500 to others without powering them upCommunication protocols: Modbus RTU (RS-485 available with all plug-in modules), CANopen, DeviceNet and Profibus DPWLP and SuperDrive G2 free software

View Complete Details

Ask Latest Price & Details

Intelligent Pump System

Full protection to pumping systems and maximized usability through special functionsMany functions, which allow the full control of your systemEliminates the complexity of existing panels that uses traditional control methodsWizards free of charge that can be added to your standard driveHMI in all Drives to make the set-up easySoftPLC function built-inFlash memory module: In few seconds, it is possible to download the programming from one VSD to others

View Complete Details

Ask Latest Price & Details

Multipump Intelligent Pump System

Full protection to pumping systems and maximized usability through special functionsMany functions, which allow the full control of your systemEliminates the complexity of existing panels that uses traditional control methodsWizards free of charge that can be added to your standard driveHMI in all Drives to make the set-up easySoftPLC function built-inFlash memory module: In few seconds, it is possible to download the programming from one VSD to others

View Complete Details

Ask Latest Price & Details

Multiplex Intelligent Pump System

Full protection to pumping systems and maximized usability through special functionsMany functions, which allow the full control of your systemEliminates the complexity of existing panels that uses traditional control methodsWizards free of charge that can be added to your standard driveHMI in all Drives to make the set-up easySoftPLC function built-inFlash memory module: In few seconds, it is possible to download the programming from one VSD to others

View Complete Details

Ask Latest Price & Details

Terminal Blocks

All terminal blocks models are designed to side by side assembly, ensuring the best use of space within the panels.

View Complete Details

Ask Latest Price & Details

WEG CWB Contactors

The configuration of two built-in auxiliary contacts (1NO + 1NC) makes the application of CWB contactors more flexible in most automation systems, contributing to the optimization of internal space of electrical panels.

View Complete Details

Ask Latest Price & Details

Contact Blocks

Side or front mounted auxiliary contact blocks with 4 additional auxiliary contacts.DC Coils with no Inrush Pick-Up Current Low consumption D.C. coils allow direct control through PLCs without the need for coupler relays.

View Complete Details

Ask Latest Price & Details

W50 High Voltage Motors

Features Rated output: 110 kW to 1250 kW Number of poles: 2 to 8 Frame sizes: 315H/G to 450J/H Frequency: 50 or 60 Hz Voltage: 1, 2 kV to 6, 6 kV Service factor: 1, 00

W50 motors offer not only excellent performance, but comply with the strictest efficiency and safety criteria in the most severe applications. W50 provides low vibration levels, versatility and reduced maintenance.

View Complete Details

Ask Latest Price & Details

W21 - Aluminium Frame - High Efficiency - IE2

WEG multivoltage aluminium frame motors with removable base were specially designed to meet market requirements in reference to mounting flexibility once they allow all mounting positions. The foot mounting system offers great flexibility and it is quite simple allowing change on the mounting configuration without requiring any machining or modification on the motor feet. Motor terminal box can also be rotated at 90 degrees allowing motor leads to be connected on any motor side.

View Complete Details

Ask Latest Price & Details

W21 - Aluminium Frame - Premium Efficiency - IE3

Feature Output: 0, 12 up to 37 kW Frames: 112 up to 200M/L Voltage: 220-240/380-415V (up to 100L) / 380-415/660V (from 112M and up) Class “F” insulation (ΔT = 80K) Continuous duty: S1 Design N

WEG multivoltage aluminium frame motors with removable base were specially designed to meet market requirements in reference to mounting flexibility once they allow all mounting positions. The foot mounting system offers great flexibility and it is quite simple allowing change on the mounting configuration without requiring any machining or modification on the motor feet. Motor terminal box can also be rotated at 90 degrees allowing motor leads to be connected on any motor side.

View Complete Details

Ask Latest Price & Details

W21 Cast Iron Frame Motor

Three-phase, IP55, TEFC Output: 0.12 up to 355 kW Frames: 63 up to 355MLVoltage: 415V Class F insulation (T = 80K)Continuous duty: S Design NAmbient temperature: 40 C, at 1000 m.a.s.lSquirrel cage rotorAluminium die cast VRing on both endshields, Stainless steel nameplat Dimensions according to IEC-72 Performance characteristics according to IEC 34Regreasing nipple from frame 225SM and aboveMetric threaded cable entries on the termal box thermistors (1 per phase) fitted in frame 160M and aboveSuitable for inverter duty applicationsColor: RAL 5009

View Complete Details

Ask Latest Price & Details

W21 Standard Efficiency Non-Sparking Motor

Three-phase, multivoltage, IP55, TEFCHigh Efficiency - complying with IE1 efficiency levelsOutput: 0, 12 up to 315 kWNumber of Poles: 2 to 12Frames: 63 up to 355MLMounting: B3TVoltage: 220-240380-415 V (up to frame size 100L), 380-415660 V (from frame size 112M and up)BMC 6-pin terminal blockClass F insulation (T = 80K)Continuous duty: S1Design NAlarm thermistors (140 C) 1 per phase and tripping thermistors (155 C) 1 per phaseAmbient temperature: 40 C, at 1000 m.a.s.lSquirrel cage rotor Aluminium die castV-Ring sealRubber Drain PlugsStainless steel nameplateRegreasing nipple for frames 160M to 355MLColor: RAL 5009 - Blue

View Complete Details

Ask Latest Price & Details

W21 Standard Efficiency Non-Sparking Motor

Three-phase, multivoltage, IP55, TEFCTop Premium Efficiency - complying with IE3 efficiency levelsOutput: 0, 75 up to 315 kWNumber of Poles: 2 to 8Frames: 80 up to 355MLMounting: B3TVoltage: 220-240380-415 V (up to frame size 100L), 380-415660 V (from frame size 112M and up)BMC 6-pin terminal blockClass F insulation (T = 80K)Continuous duty: S1Design NAlarm thermistors (140 C) 1 per phase and tripping thermistors (155 C) 1 per phaseAmbient temperature: 40 C, at 1000 m.a.s.lSquirrel cage rotor Aluminium die castV-Ring sealRubber Drain PlugsStainless steel nameplateRegreasing nipple for frames 160M to 355MLColor: RAL 6002 - Green

View Complete Details

Ask Latest Price & Details

Tachogenerators

Available Models R/20, 1R/60, 1R/100 1RC/20, 1RC/60, 1RC/100 1RCP/20, 1RCP/60, 1RP/100 2RC/20, 2RC/60, 2RCP/100

WEG tachogenerators have been designed to be used on numerical servocontrols, textile machines, acceleration and breaking of elevators and other applications requiring continuous or fully controlled speed, or acceleration or deceleration of pre-established programs.

View Complete Details

Ask Latest Price & Details

Synchronous Motors

Technical feature Outputs: up to 110, 000 kW Frames: 280 to 1800 (IEC) Voltages: 220 to 13, 800 V

WEG offers complete industrial solutions with outstanding products designed to meet technology and quality standards required worldwide. Among its range of products, the company offers its Synchronous Motors which are highly used by the industry for their high efficiency on applications that required power factor correction, high torques and constant speed resulting in low operating and maintenance cost.

View Complete Details

Ask Latest Price & Details

High Voltage ODP Slip Ring

M Line motors are manufactured in different configurations in reference to cooling methods and degree of protection, allowing the machine to be designed as suitable as possible to meet operation and environment requirements. Motors in frame sizes IEC 280 to 560 are manufactured in cast iron, while frame sizes IEC 630 and above are fabricated in welded steel plates.

View Complete Details

Ask Latest Price & Details

Low High Voltage TEAAC Slip Ring

Features Sinusoidal power supply of 220 to 13, 800 V Motors manufactured in 4 to 12 poles Cast iron frames 280 to 560 and welded steel plates for frame 630 to 1800

M Line motors are manufactured in different configurations in reference to cooling methods and degree of protection, allowing the machine to be designed as suitable as possible to meet operation and environment requirements. Motors in frame sizes IEC 280 to 560 are manufactured in cast iron, while frame sizes IEC 630 and above are fabricated in welded steel plates

View Complete Details

Ask Latest Price & Details

M Line - MGA Low High Voltage ODP Squirrel Cage

M Line motors are manufactured in different configurations in reference to cooling methods and degree of protection, allowing the machine to be designed as suitable as possible to meet operation and environment requirements. Motors in frame sizes IEC 280 to 560 are manufactured in cast iron, while frame sizes IEC 630 and above are fabricated in welded steel plates.

View Complete Details

Ask Latest Price & Details

M Line - MGP -Medium Voltage Motor

Recent investments in WEGs North American facility takes production capability to a new level. Frames are in stock and the electrical packages are built to order. Choose from a standard or a customized design.WEG Medium Voltage Motors present design optimized construction and are manufactured in robust frames for all applications including severe duty.

View Complete Details

Ask Latest Price & Details

WGM Line Low Voltage Squirrel Cage

Feature Powers: up to 3, 150 kW Frames: 315 to 560 (IEC) Voltages: 690 V to 6, 600 V

The cooling of the motor is done by means of a water jacket that circulates between the stator pack and the frame. This allows for a more effective thermal exchange, smaller frames and even smaller space for installation. It is ideal for applications with speed variation because the thermal efficiency is high even at reduced speeds and in cases where the dimension of the motor is a critical factor.WGM motors can be used in several segments of the industry, especially in driving machines that require constant torque even in low rotations.

View Complete Details

Ask Latest Price & Details

W60 Line Medium Voltage Three-Phase Induction Motor

The WEG W60 motor line is designed for industrial applications such as compressors, pumps, fans and others, ensuring high performance and reliability even under the most severe operating conditions. Available on three different configurations allowing it to be designed as on open, self ventilated (IC01, WP-II) motor, or an enclosed, air-air cooled (IC611, TEAAC) or air-water cooled (IC81W, TEWAC) motor.

View Complete Details

Ask Latest Price & Details

Cast Iron W21 Brake Motor

These motors can be used on any machine that requires quick stops and time savings during installation:Packing equipmentsConveyor beltsWashing and bottling machines Rolling bridges ElevatorsPrinting machines Gates Wood machinery Cranes and others

View Complete Details

Ask Latest Price & Details

Fan And Exhaust - Cast Iron Frame - IE1

These motors are designed specially for axial fan manufacturers. The design allows high output in light and compact frame sizes for the following applications: Fan and exhaustersTunnelsSubwaysAir conditioning systemsUnderground coal minesShopping centersSupermarketsOther applications

View Complete Details

Ask Latest Price & Details

CFW100 Mini Drive

The smallest Drive on the market. The CFW100 covers power levels from 0.18 to 0.75 kW (0.25 to 1 HP).Power range: 0.18 to 0.75 kW (0.25 to 1 HP)Single-phasePower supply voltage: 200-240 VScalar control (VF) or vector control (VVW)Overload capacity: 150% corrient in 60 sec.External RFI Filter (accessory)Ambient temperature -10 C to 50 C (14 F to 122 F)All the electronic boards are conformally coated classified as 3C2 according to IEC 60721-3-3 standard

View Complete Details

Ask Latest Price & Details

CFW10 Easy Drive

Feature Power range: 0.18kW to 4 kW (0.25 to 5 HP) Single-phase and three-phase Power supply voltage: 100-127 V and 200-240 V

Make your life easier can be a fast installation or a built-in keypad to configure instead trimpot and dip switch or even a quick replacement of similar product. The CFW10 series are exactly all that together in a compact product.

View Complete Details

Ask Latest Price & Details

CFW500 Machinery Drive

Power range: 0.18 to 15 kW (0.25 to 20 HP)Single-phase and three-phasePower supply voltage: 200-240 V and 380-480 VScalar Control(VF) and Control vectorial (VVW)Overload capacity: 150% corrient in 60 sec.RFI Filter built-in (accessory)Inductors in the DC link built-in(optional for size D)Ambient temperature -10 C to 50 C (14 F to 122 F)All the electronic boards are conformally coated classified as 3C2 according to IEC 60721-3-3 standardProtection Degree IP20 and NEMA 1 (with accessory)SoftPLC function built-inPlug-in modules: IOs, USB and fieldbus communicationFlash memory module: In few seconds, it is possible to download the programming from a CFW500 to others without powering them upCommunication protocols: Modbus RTU (RS-485 available with all plug-in modules), CANopen, DeviceNet, Profibus DP, Ethernet-IP, Profinet and Modbus-TCPIPWLP and SuperDrive G2 free software

View Complete Details

Ask Latest Price & Details

CFW700 General Purpose Drive

Scalar Control (VF), Vector Control (VVW), Open loop Vector Sensorless and Closed Loop with Incremental EncoderOverload capacity: ND with 110% current or HD with 150% current in 60 sec.RFI Filter built-in (optional)Safety Stop board (EN 954-1 ISO 13849-1 compliant)Ambient temperature -10 C up to 50 C (14 F up to 122 F)All the electronic boards are conformally coated classified as 3C2 according to IEC 60721-3-3 standardProtection Degree IP20 and NEMA 1 (with accessory)SoftPLC function built-inPlug-in modules: IOs and communication24 V cd power supply board for control feeding

View Complete Details

Ask Latest Price & Details

CFW11 System Drive

With high technology for control of three-phase induction motors and permanent magnets synchronous motors - Magnet, the CFW11 Series achieves the performance increase for the most complex drive systems. Design exclusive for industrial or professional use, the CFW11 presents many innovations adding significant benefits to customers, a lot for its simplicity of installation and operation, based in the Plug-and-Play philosophy also allowing simple and quick installation of its accessories.

View Complete Details

Ask Latest Price & Details

CFW701 HVAC-R Power Supply

Power range: 1.1 to 132 kW (1.5 to 175 HP)Single-phase and three-phasePower supply voltage: 200-240 V, 380-480 V and 500-600 VScalar Control (VF), Vector Control (VVW) and Open loop Vector SensorlessOverload capacity: ND with 110% current or HD with 150% current in 60 sec.RFI Filter built-inDC link Inductor built-inAmbient temperature up to 50 C (122 F)All the electronic boards are conformally coated classified as 3C2 according to IEC 60721-3-3 standardProtection Degree IP20 and NEMA 124 V cd power supply board for control feeding (optional)Flash memory module: In few seconds, it is possible to download the programming from a CFW701 to others without powering them up

View Complete Details

Ask Latest Price & Details

MVW01 Medium Voltage Variable Speed Drive

Feature Power range from 500 to 22500HP (16000kW) Motor Voltage from 2, 3kV to 6, 9kV High reliability due to proven design and low parts count Fuseless design

WEG is the only Brazilian supplier of medium voltage equipment which can supply the complete solution: incoming cubicle, oil or dry transformer, variable frequency drive and medium voltage electric motor.The MVW-01 variable frequency drive includes state-of-the-art technology through a multi-level structure with high voltage IGBTs, reducing the harmonic currents in the motor to extremely low levels resulting in long life motor insulation.In terms of control, MVW-01 operates with micro-processing, using 32 bit processors (64 bit bus bar) with high speed and pointing float mathematics, assuring great motor control performance. With a three-level neutral point clamped (NPC) inverter topology, it reduces the number of power switching devices in the inverter improving reliability.

View Complete Details

Ask Latest Price & Details

CFW501 HVAC-R Variable Speed Drives

Power range: 0.18 to 7.5 kW (0.25 to 10 HP)Three-phasePower supply voltage: 380-480 VScalar Control (VF) and Vector Control (VVW)Overload capacity: 110% of current in 60 sec.RFI Filter built-inHMT - Harmonic Mitigation TechnologyAmbient temperature 40 C (104 F)All the electronic boards are conformally coated classified as 3C2 according to IEC 60721-3-3 standardProtection Degree IP20 and NEMA 1 (with accessory)Flash memory module: In few seconds, it is possible to download the programming from a CFW501 to others without powering them upCommunication protocols: Modbus RTU, BACnet MSTP and Metasys N2Special features required in the HVAC-R systemsWLP and SuperDrive G2 free software

View Complete Details

Ask Latest Price & Details

CFW09 Variable Speed Drive

The WEG CFW-09 Series of Variable Speed Drives incorporate the worlds most advanced technology in drives for three-phase AC induction motors. The Vectrue Technology represents a siginificant advancement, allowing this new generation of WEG inverters to combine V F, Sensorless Vector and Closed Loop Vector (with encoder) control techniques, all in one product. An innovation was also introduced to simplify applications that require braking torque. A new feature named Optimal Braking eliminates the need for the dynamic braking resistor in some applications allowing a simpler, more compact and economic solution.

View Complete Details

Ask Latest Price & Details

ECW500 Automatic Voltage Regulator

Automatic voltage regulator completely configurable via Modbus RS485422 protocol with several configurationsetting parameters used on synchronous machines. The ECW500 automatic voltage regulator is a completely configurable device via Modbus RS485422 protocol with several configurationsetting parameters used on synchronous machines.

View Complete Details

Ask Latest Price & Details

CWB Contactors - From 9 Up To 38A

Developed according to IEC 60947 and UL 508 international standards, the new WEG CWB line of contactors meets the requirements of a wide range of industrial applications worldwide.

View Complete Details

Ask Latest Price & Details

Minicontactors CWC0

Features Operation on AC-3 up to 22A Direct mounting to RW17 overload relay AC and DC minicontactors are of the same size for frames up to 16A Low consumption DC coils Operation on AC-4

Compact and complete solution for control and operation of circuits. Wide range of accessories, allowing fast and compact assembly for various applications.

View Complete Details

Ask Latest Price & Details

Auxiliary Contactors

The auxiliary contactors on CWCA0 series were developed to suit various applications in control circuits.These minicontactors have a widerange of accessories allowing greater flexibility for control circuits. Two auxiliary blocks are available for frontal mounting with two or four contactsAC and DC coils are of the same sizeThe same accessories used for power contactors CWC0 may be used for this line of contactorsDirect mounting on DIN EN 50.002 or with fixing screws

View Complete Details

Ask Latest Price & Details

Power Factor Correction Capacitors

Feature Self-healing metalized polypropylene film Internal over pressure security device Maximum allowed fault current of 10kA

The growing demand for electricity has required large investments in power generation to meet the rate of global development, both in developing countries where the population has gained greater access to consumer goods, and in developed countries, where energy efficiency has been object concern in order to reduce high investments in power generation. These investments, however, besides being planned in the medium and long term, involve the use of increasingly scarce natural resources which are subject to environmental pressures. In short term, the best way to increase the supply of electricity has been reducing waste and increasing energy efficiency. It is estimated that currently 40% of global consumption of electricity is related to the use of electric motors. Moreover, the application of new technologies has become increasingly common in many industry sectors, bringing deep changes in the form of application and control of electric motors.

View Complete Details

Ask Latest Price & Details

Capacitor Switching CWMC Contactors

Feature Low costs High reliability Small dimensions Direct mounting on DIN Rail 35mm or with fixing screws Built-in pre-charge resistors

WEG CWMC contactors were specially designed to operate power factor correction capacitors (utilization category AC-6b). Special development to perform specific operations for this type of application.

View Complete Details

Ask Latest Price & Details

Pushbuttons And Pilot Lights CSW

Designed to operate in severe industrial applications, WEGs Pushbuttons and Pilot Lights series offers state-of-the-art technology and all contacts and flanges were developed with a quick and easy fitting system.

View Complete Details

Ask Latest Price & Details

Terminal Blocks

To ensure a secure and reliable connection of electrical conductors. Developed to meet the various market segments, attending to requirements for quality and performance. Terminal blocks are devices designed to provide a safe means of electrical and mechanical connection to the majority of the electrical conductors. The BTW line has the following characteristics:

View Complete Details

Ask Latest Price & Details

E House ELW Control Panels

Designed and built to meet strict metal construction standards, the ELW are capable of receiving and integrating a wide range of electro-electronic equipment in the generating, distribution, protection and command sectors, in addition to other applications, always seeking to meet to the most diverse requests and needs of each Project.

View Complete Details

Ask Latest Price & Details

Low Voltage Motor Control Center - LV MCC

WEG LV MCCs were designed for various market segments, fulfilling quality and performance requirements compared to the best products available internationally. Highly standardized, these products were designed to provide easy assembly, installation, maintenance and future updates. The LC MCCs are certified according to NBR IEC 60439-1 TTAPTTA Standard and type 1 and 2 coordination, according to IEC 60947, ensuring, as such, highly reliable operation and maintenance.

View Complete Details

Ask Latest Price & Details

Medium Voltage Motor Control Center - MV MCC

MV MCCs are simplified or shielded metallic cubicles, air isolated for voltages up to 7.2 kV, according to NBR 6979 and IEC 62271-200 standards and with classification according to IEC 62271-200:IAC AF and LSC2A-PM. They consist of contactors, removable by vacuum or SF6, with built-in, HH type limitation fuses. The busbar can be simple or double and can be mounted with up to 2 contactors per column.

View Complete Details

Ask Latest Price & Details

Medium Voltage Control System

WEG MCCs (MV Operation and Control sets) are factory assembled and tested for voltages of 2.3 kV to 36 kV. They were developed to fulfill demanding national, NBR6979, and international, IEC 62271-200, IEC 60298 and 60694, standards without affecting assembly and maintenance operations, as well as the flexibility of adapting to different affecting.

View Complete Details

Ask Latest Price & Details

TTW01 - Type-Tested Assembly

The TTW01 - Low voltage modular panels that meets the IEC 60439-1 and IEC 60439-3 standards, with total operational and maintenance security because of their characteristics TTAPTTA. Developed to meet the requirements of the switchboards loads of high electrical currents and high levels of short-circuit current, with switchgear equipment and protection that meet the requirements of quality, security and performance. Their modularity allows future expansions without having to make adjustments during assembly, the modular structure is simple to install and sizing, allowing mounting the panels by integrators duly trained by WEG.

View Complete Details

Ask Latest Price & Details

WEG Low Voltage Load Center

WEG low voltage Load Centers were designed to meet the specifications of market segments by the use of Load Distribution Switchboards of high currents, high short-circuit levels and compartmentalization of protection and maneuvering equipment. They comply with quality, security and performance requirements compared to the best products available internationally. Designed to meet high standards, this product facilitates assembly, installation, maintenance, future expansion and inter-changeability between circuit-breakers of the same model, size and function.

View Complete Details

Ask Latest Price & Details

Alternators For Generator Sets

WEG's large experience on the manufacturing of alternators, added to modern design, production capacity and testing availabilities have resulted in the competitive line of brushless synchronous alternators fitted with electronic voltage regulator. Available up to 4200 kVA, the synchronous alternators are mainly applied on diesel and gas generator sets as well as on steam, gas and hydraulic turbines. They are suitable to operate on all emergency or continuous operation generator sets in industrial, commercial, marine, telecommunication, mining areas, in addition to condominiums, irrigation purposes, hospitals and others.

View Complete Details

Ask Latest Price & Details

Hydrogenerators

WEG offers complete solutions for generation and distribution of energy by supplying internationally recognized quality and state-of-the-art products. Among all WEG products are the Hydrogenerators and Turbogenerators, which are widely used by Power and Utility Companies for their high efficiency and durability.

View Complete Details

Ask Latest Price & Details

Minicontactor WEG CWC0

WEG offers its new monicontactor CWC025, compact solution for control and operation of circuits. AC and DC minicontactors are of the same size for frames up to 16A, simplifying the project of new panels Insulation voltage 690VOperation on AC-4The technology used on WEG's minicontactors with low consumption DC coils, allows the use of lower power suppliesDirect mounting on 35mm DIN railSpare coils and contact sets

View Complete Details

Ask Latest Price & Details

Weg Industries India Private Limited Hosur, Tamil Nadu

Our Products

Compact Solution

MW500 Decentralized Drive

Intelligent Pump System

Multipump Intelligent Pump System

Multiplex Intelligent Pump System

Terminal Blocks

WEG CWB Contactors

Contact Blocks

W50 High Voltage Motors

W21 - Aluminium Frame - High Efficiency - IE2

W21 - Aluminium Frame - Premium Efficiency - IE3

W21 Cast Iron Frame Motor

W21 Standard Efficiency Non-Sparking Motor

W21 Standard Efficiency Non-Sparking Motor

Tachogenerators

Synchronous Motors

High Voltage ODP Slip Ring

Low High Voltage TEAAC Slip Ring

M Line - MGA Low High Voltage ODP Squirrel Cage

M Line - MGP -Medium Voltage Motor

WGM Line Low Voltage Squirrel Cage

W60 Line Medium Voltage Three-Phase Induction Motor

Cast Iron W21 Brake Motor

Fan And Exhaust - Cast Iron Frame - IE1

CFW100 Mini Drive

CFW10 Easy Drive

CFW500 Machinery Drive

CFW700 General Purpose Drive

CFW11 System Drive

CFW701 HVAC-R Power Supply

MVW01 Medium Voltage Variable Speed Drive

CFW501 HVAC-R Variable Speed Drives

CFW09 Variable Speed Drive

ECW500 Automatic Voltage Regulator

CWB Contactors - From 9 Up To 38A

Minicontactors CWC0

Auxiliary Contactors

Power Factor Correction Capacitors

Capacitor Switching CWMC Contactors

Pushbuttons And Pilot Lights CSW

Terminal Blocks

E House ELW Control Panels

Low Voltage Motor Control Center - LV MCC

Medium Voltage Motor Control Center - MV MCC

Medium Voltage Control System

TTW01 - Type-Tested Assembly

WEG Low Voltage Load Center

Alternators For Generator Sets

Hydrogenerators

Minicontactor WEG CWC0

Contact Us

Weg Industries India Private Limited
Hosur, Tamil Nadu