Our Products
Construction Machinery & Equipment
2 Products availableHoists
2 Products availableVibratory Compactor
2 Products availableCrane
1 Products availableMeasuring Instruments & Equipment
1 Products availableElectrical Cables & Wires
1 Products availableWheelbarrow
1 Products availableJigs, Casting Dies, Die Casting Moulds & Moulding Tools
1 Products availableLeading Manufacturer, Supplier & Retailer of Mini Reversible Mobile Concrete Mixer (WM 800), Mini Reversible Mobile Concrete Mixer (WM 1050) and vibrating needle.
Additional Information:
Delivery Time : 20 days
Dimensions
Type | 4 Bins | 4 Bins |
---|---|---|
Total Length | 8706 mm | 8705 mm |
Total Width | 2135 mm | 2135 mm |
Total Height | 2750 mm | 2750 mm |
Total Weight | 7 Ton Approx | 9 Ton Approx |
Specifications
Output Rate | 12-15 m2/hr. | 18-20 m3/hr. |
---|---|---|
Volume | 1200 Lt. | 1200 Lt. |
Output / Mix | 750 Lt. | 750 Lt. |
Mixed Motor | 20 HP | 30 HP |
Sand / Aggregate | 2/4 Hopper | 2/4 Hopper |
Hopper Cap. Each | 2.5 m3 | 2.5 m3 |
Water Pump | 2 Nos. | 2 Nos. |
Connected Power | 50 HP | 60 HP |
Specifications
Power | 10 HP Diesel Engine or 10 HP Elec. Motor |
---|---|
Capacity | 750 Kg gross load carrying capacity |
Max. Height | 110 Ft |
Speed | 20 mtr / min but can also be designed according to the specific requirement |
Column | 50 x 50 x 5 mm angle |
Wheels | Pneumatic Wheels |
Wire Rope | 12mm steel crore |
Specifications
Power | 12.5 HP Diesel Engine or 15 HP Elec. Motor |
---|---|
Capacity | 1000 Kg gross load carrying capacity |
Max. Height | 200 Ft |
Speed | 33 mtr / min but can also be designed according to the specific requirement. |
Wheels | Pneumatic Wheels |
Wire Rope | 12mm steel crore |
Details
Size | Varying sizes of cubes available :Most commom size are 75 mm & 150 mm |
---|---|
Material | Cast Iron internal faces are machined are machined flat to. + 0.02 mm All moulds conform to their respective indian Standards. |
Details
Power | HP | Volts / Strokes | RPM |
---|---|---|---|
Petrol Kerosene / Petrol Diesel | 1.5 | 2 Strokes | 3000 |
Diesel engine | 5 | 4 Strokes | 3000 |
Electrical | 2 | 1/3 Strokes | 2800 |
Specifications
Dimension | Shaft length | Hose length (mtrs.) |
---|---|---|
25 | 600mm. | 6/4 |
40 | 600mm. | 6/4 |
60 | 600mm. | 6/4 |
Specifications
Plate Size | 610 x 445 mm. (24 x 18 ins.) |
---|---|
Compacting Surface | 0.26 Sq. Meters (2.88 Sq. Ft.) |
Height | 648 mm. (25.5 ins.) with handle extension removed. |
Width | 630 mm (28 ins.) |
Weight | 150 Kg. Approx |
Centrifugal Force | 1.811 Kg (3.995 lbs.) Vibrating unit) |
Vibration Frequency | 5600 v.p.m maximum |
Forwarding Motion | 14 to 20 Meters per minute (45 to 85 per min.) Depending upon back till or surface conditions. |
Power A B | 3H.P 3 Phase 2800 R.PM 5 H.P. Diesel Engine. |
Specifications
Model | WM800 |
---|---|
Hopper Capacitty | 750 Ltrs. |
Batch Capacity | 600 Ltrs. |
Machine Output/hour. | 12cu. M./hr |
Power | 12.5 H.P.3Ph. Ele. Motor |
Water Tank Capacity | 120 Ltrs. |
Weighing System | Load Cell Based System With Digital Display Batch Controller. |
Hydraulic Pump | 20 Lpm Gear Pump @ 180 Bar |
Gear Ring & Roller | Accurately Machined With Gear Cutting Operation Supported By Heavy Duty Twin rollers guide |
Wheels | Pneumatic Wheels (4 Nos.) 600 X 16 |
Jack Leveling | Pin Type (4 - Nos.) |
Wieight (Kgs) Approx | 2800kgs |
Specifications
Model | WM1050 |
---|---|
Hopper Capacitty | 1050 Ltrs. |
Batch Capacity | 750 Ltrs. |
Machine Output/hour. | 15cu. M./hr |
Power | 15 H.P.3Ph. Ele. Motor |
Water Tank Capacity | 150 Ltrs. |
Weighing System | Load Cell Based System With Digital Display Batch Controller. |
Hydraulic Pump | 20 Lpm Gear Pump @ 180 Bar |
Gear Ring & Roller | Accurately Machined With Gear Cutting Operation Supported By Heavy Duty Twin rollers guide |
Wheels | Pneumatic Wheels (4 Nos.) 600 X 16 |
Jack Leveling | Pin Type (4 - Nos.) |
Wieight (Kgs) Approx | 2800kgs |