Waterino

Makarba, Ahmedabad, Gujarat

ApplicationUsed for pumping sewage water, pumping of heavily contaminated fluids from buildings and surface drainage, industrial and process engineering, municipal waste water pumping.

Features

• Single shaft pump with built in float switch in single phase version.
• Jacketed dry motor
• Inbuilt thermal motor protection
• High level of operating reliability
• Easy to install and simple to use

Application

• Drinking water application.
• Sea water desalination
• Mineral water bottling plant
• Food industries, dairy industries, wine industries
• Pharmaceuticals industries, wine industries

Reverse Osmosis Principal In ShortAs surface water does not easily available now a days for drinking water, ground water available are mostly contaminated with various dissolved solids which will be harmful for our body. Reverse osmosis (RO) is a water purification technology that uses a semipermeable membrane. RO can remove many types of molecules and ions from solutions and is used in both industrial processes and in producing potable water. The result is that the solute is retained on the pressurized side of the membrane and the pure solvent is allowed to pass to the other side. To be "selective, " this membrane should not allow large molecules or ions through the pores (holes), but should allow smaller components of the solution (such as the solvent) to pass freely.
In the normal osmosis process, the solvent naturally moves from an area of low solute concentration (High Water Potential), through a membrane, to an area of high solute concentration (Low Water Potential). The movement of a pure solvent is driven to reduce the free energy of the system by equalizing solute concentrations on each side of a membrane, generating osmotic pressure. Applying an external pressure to reverse the natural flow of pure solvent, thus, is reverse osmosis.

PRESSON-9 is innovative digital power saver home booster pump with inbuilt inverter technology that delivery constant water pressure for your utility water supply.  Inbuilt variable frequently drive with permanent magnet motor will save running power cost which is return of investment for longer. Unlike conventional “pressure pump”, compact & sensation look of PRESSON-9 with minimum space required appreciate your architecture excellent.  

Waterino Fixed Diaphragm Pressure Tank is an essential part of automatic pressurized water supply system (formally known as pressure pump or hydro pneumatic system). The tank stores premeditated water in pressurized chamber between food grade high grade BUTYL diaphragm & polypropylene  liner to supply uninterrupted pressurized water.  A properly sized pump with  “WATERINO” fixed diaphragm tank work as a team to meet your needs of constant pressure , reduce numbers of starts of pump, eliminate water hammering and deliver many years of trouble free service.

Salient Features

• Cold rolled Carbon Steel shell for extra strength.
• NSF certified heavy duty BUTYL diaphragm.
• Operating temperature : -10 to +93 Degree Centigrade
• Internationally approved to use with potable water
• Two years warranty

Application

• Hydro pneumatic system
• Pumping system
• Fire fighting system
• Irrigation system

Details

• Option : 1 2”dial SS body, brass mechanism, 0-7 Bar, ¼” Male thread bottom connection.
• Option : 1 2.5”dial SS body, brass mechanism, glycerin filled 0-10 Bar, ¼” Male thread bottom connection.

“The simplest, easy and economic way to deliver booster system”
The WATERINO pressure controller orders the automatic start and stop of the water pump when opening or closing any tap or valve of the plumbing circuit. The controller can keep a constant pressure and water flow in the system as long as any tap in the system is open during the pump’s operation. It also prevents pump to run on DRY condition without water.

Features

• It starts pump on preset pressure and stops pumps on maximum pressure.
• Virgin Nylon body for better strength.
• Built in non return valve to avoid reversal of flow.
• It stops the pump in “loss of prime” circumstances and restart the system with MANUAL reset.

Electronic control panel (Microprocessor based / plc-VFD based)

Pressure Control Switch is a device that controls systems against pressure drops or pressure spikes. We are well-known Importer and Supplier of Pressure Control Switch from Ahmedabad, Gujarat. We offer our customers with an assortment of quality products at affordable prices. The products supplied by us are durable and extremely reliable. We offer desirable equipments and accessories to our clients and promise them with a hassle free and timely delivery.

Details

• Not affected by upstream flow distribution
• Suitable for water with moderate quality and hard water
• Meter confirm to international standard ISO: 4064:1993 CLASS: B & C
• Size available D15 to D50 mm.
• Force on turbine are symmetrical distributed
• Cost is slight higher as more material need to manufacture

Details

• Affected by upstream flow distortion.
• Install in horizontal or vertical position
• Meter confirm to international standard ISO: 4064:1993 CLASS: B
• Size available D50 to D800 mm.
• The measuring chamber can be interchange with affecting the metrology.

Fully stainless steel construction multistage submersible enbloc bottom suction electric pump WSM is best suitable for application of “Pressure boosting system”, “Rain Water Supply”,   “Water supply from tanks, basin, river or 5” or above bore well. The “DRY” motor is protected by double mechanical seal with an interposed oil chamber provide long lasting reliability.  Motor cooled by pumped liquid passing between the motor body and the external jacket is a supplementary advantage.

Details

• Heavy duty Brass Five way connector for pressure pump.
• Option: 1 Connection type: 1”Male, 1”Female, 1”Female, ¼”Male, ¼” female.
• Option:2  Connection type: 1”Male, 1”Female, 1”Female, ¼”Female, ¼” Female.
• Option:3  Connection type: 11/4”Male, 11/4”Female, 11/4”Female, ¼”Male, ¼” female.

WATERINO cable float switch are widely used for controlling liquid levels in free flowing liquid tanks, pits. Our cable float switch are easy to install, reliable design and economical solution for trouble free operation. Switching of ON or OFF differential is adjustable by counterweight on the cable by determine free float cable between weight and float. No special arrangement is required to install the cable float switch, just hanging the cable from top of the tank as per required level will help to automate the emptying and filling up of tank. Our cable float switch can be used directly with single phase pump or to be used through control circuit in three phase pump set as per define current limit.

Features

• It automates the start and stop of single phase electrical pump directly according to set water level.
• SPDT  micro switch with NO & NC signal output.
• IP 68 Degree of protection.

Features

• Easy but smart solution.
• Individual wire from each meter /to data logger which can be trace very easily for maintenance.
• Data loggers are available with 1/4/8/16 Channel as per requirement with versatility.
• Digital monochrome scrolling display unit.
• Logging interval settable as per your requirement and accuracy required.
• RS232, RS 485 communication ports available as per requirement.
• Indication for input disconnection, power failure and communication failure.
• Required inbuilt memory up to 4MB and expandable up to 8 GB depends upon models.
• Text/Excel format for data logging.

Features

• Easy, fast and RF based communication for limited distance (up to 100Mtrs.) use.
• 2.1Ghz wireless transceivers from centre data logging.
• Data loggers are available with 1/4/8/16 Channel as per requirement with versatility.
• Digital monochrome scrolling display unit with LCD display and keypad.
• Battery back up for 2-3 hrs.
• Logging interval settable as per your requirement and accuracy required.
• RS232, RS485 communication ports available as per requirement.
• Indication for input disconnection, power failure and communication failure.
• Required inbuilt memory up to 4MB and expandable up to 8 GB depends upon models.
• Text/Excel format for data logging.

innovative digital power saver home booster with inbuilt inverter technology

value for money

KP 34 Details

• Rated voltage : 220V
• Frequency : 50 Hz.
• Rated Current : 12 Amps-AC3 duty.
• Max. cut off pressure : 100 PSI
• General Pressure setting : 30-50 PSI
• Connection : ¼” Female

KP 35 Details

• Rated voltage : 220V
• Frequency : 50 Hz.
• Rated Current : 16 Amps-AC3 duty.
• Pressure setting range : -0.2 to 7.5 Bar
• Differential  Pressure range : 10-58 PSI
• Connection : ¼” Male

KP 36 Details

• Rated voltage : 220V
• Frequency : 50 Hz.
• Rated Current : 16 Amps-AC3 duty.
• Pressure setting range : 2.0 to 14.0 Bar
• Differential Pressure range : 10-58 PSI
• Connection : ¼” Male

Details

• Low cost & small size
• Suitable for water with moderate quality and hard water
• Meter confirm to international standard ISO: 4064:1993 CLASS: B & C
• Size available D10 to D25 mm.
• Force on turbine are not symmetrical distributed
• The shaft/bearing of the turbine have to compensate for this asymmetrical force.

Owning and maintaining an aboveground or in ground swimming pool requires an investment of money, time & several pieces of important swimming pool equipment that will keep your pool in top-working condition, and leave you free to enjoy more. We carry a complete line of swimming pool equipment - top-quality products from the best manufacturers in the business.
Pollution in pool water comes either from the environment or is carried into the water by the swimmers. Environmental pollution includes dust, leaves, chemical wastes, pollen, spores, bacteria and so on, that are blown into the water by the wind. Swimmers carry other pollutants into the water: sweat, suntan oils, urine, bacteria, viruses, etc.
Every swimming pool has a circulation pump and filter. The filters most common these days are sand filters. The pool pump ensures that the swimming pool water moves through the filter every day, thus removing unwanted pollutants and disinfected organic materials as quickly as possible.
Generally, the swimming pool pump should run for at least 6 - 8 hours each day. There is usually a timer which cycles the pool pump on and off to ensure this constant filtration. The circulation of pool water will remove floating or suspended particles of dirt from the water, but has no effect on the substances which have settled to the bottom of the swimming pool or "stuck" to the walls.
Depending on the environmental conditions and swimmer load, the swimming pool needs regular brushing and vacuuming, generally about once a week in the swimming season for home pools. With the circulation pump turned off, the walls and floor of the pool are swept with a stiff brush. When the "dust" from the brushing settles, it is vacuumed off the floor of the swimming pool. The pool must also be vacuumed after treating with a flocculant. Nowadays, there is a variety of automatic swimming pool cleaners, which suck the dirt off the walls and floor of the swimming pool whenever the pool pump is running. These are really great for pool owners who never seem to have the time for swimming pool chores.
After vacuuming is done, it is time to backwash the filter. Sand filters trap dust and dirt, as the name implies, in a bed of sand. When the filter has accumulated a large amount of dirt, the water cannot pass freely through the sand and the filter loses efficiency as the pressure increases. Backwashing sends water backwards through the filter and flushes the trapped dirt out. After backwashing, you will notice an increase in return pressure to the pool, and if you have a pressure guage, you should notice an increase of at least 0, 5 bar.

Products We Offered

• Swimming pool filter / pump
• Swimming  Pool side equipments(grating, ladders, multi floor inlet, skimmers, suction port, main drain, pool cover)
• Swimming Pool Cleaning equipments (Brush, vacuum head, net, telescopic head, vacuum hose, floating tablet dispenser, suction sweeper)
• Swimming  Pool side equipments (grating, ladders, multi floor inlet, skimmers, suction port, main drain, pool cover)
• Swimming  Pool chemicals (tcca tablet, tcca granular, liquid chlorine, hydrochloric acid(hcl), poly aluminum chloride, alum)

Float Switch is a device used to spot the level of water within a tank. The switch may be used as an indicator, in a pump, in an alarm, or other devices. We are well-known Importer and Supplier of Float Switch from Ahmedabad, Gujarat. We offer our customers with a wide range of Float Switch which come in various seizes along with varying applications. The equipments offered by us are affordable and highly reliable.

Most popular REVERSE OSMOSIS WATERINO pressure tank is an essential part of domestic and industrial  online reverse osmosis plant. The tank stores premeditated water in pressurized chamber between food grade high grade BUTYL diaphragm & polypropylene  liner to supply uninterrupted pure water in automated action.

Salient Features

• Stainless Steel water connection.
• High grade BUTYL diaphragm.
• Virgin polypropylene liner.
• NSF approved material.
• Cold rolled Carbon Steel shell for extra strength.
• Two years warranty

Application

• Online Reverse Osmosis System
• Industrial RO system
• Auto feeding to Ionizer water machine.

Use for automatic pressurized water supply round the clock to villas, restaurant, farm house, residential scheme like apartments, bunglows, Multistory buildings, hotels, hospitals, dharmsala etc…
In a regular practice we pump the utility water from ground level to top floor storage tank and then get gravity water for various utility. Hydro pneumatic system is a kind of technology where we can get pressurized water directly from ground level without top floor storage or minimize the unnecessary storage.
System can be designed in multiple pump configuration like twin pump, three pump, four pump.six pump with microprocessor based electric control panel/ plc panel / plc panel with single vfd / multi vfd with required accessories  for ready to use. 

Designing of system

• The size of water supply unit is determined according to the quantity of water required and pressure required which is differ from site to site.
• Reliability and efficiency of system is truly depend upon proper selection of right kind of pump set and accessories.
• System is only reliable if pump selection is done by experienced technical person. Pipe and fittings should be having capacity to withstand design pressure.
• Care should be taken care for easy dismantling of the system for maintenance.
• Necessary control features should be provided for pump protection.

• Low price
• Durable
• Low maintenance
• Good quality

• Filters the pool water
• Durable
• Efficient
• Low price

• FRP filter
• Pump
• Pool side equipments
• Pool chemicals
• Filter side equipments

We offer ZILMET-ITALY make ULTRAPRO series tank with replaceable food grade BUTYL membranes. All tanks are MIG welded carbon steel body with no interior rough spots or sharp edges. All tanks are externally painted with EPOXY powder. ULTRAPRO tanks are best choice for irrigation pumps, centrifugal pumps, submersible pumps and for booster sets. All tanks are undergone a strict factory testing procedure and are certified according to PED 97/23/EC.
Available ranges are from 24 Ltrs – 3000 Ltrs.  Standard range are available with 8-10 Bar maximum operating pressure.  Special range are also available for 16 Bar operating pressure to be used for multistory buildings or industrial applications.

Hydro Pneumatic Water Supply relates to round the clock pressurized water supply to villas, restaurant, farm house, residential scheme like apartments, bungalows, multistory buildings, hotels, hospitals etc. In regular practice the useful water is pumped from ground level to top floor storage tank and then to get gravity water for various utility. Hydro pneumatic system is a modernized form of older method of gravity tank water supply. We are prominent Importer and Supplier of Hydro Pneumatic Water Supply System from Ahmedabad, Gujarat. It is a modern form of water supply system which works with the purpose of controlling or boosting limited water supply pressure to higher or more uniform value. Minimizing unnecessary storage this technology permits continuous and satisfactory water supply at all fixtures within the system. This system can be designed making use of multiple pump configuration consisting of varying number of pumps and microprocessor based on different panels with single vfd or multi vfd along with required accessories. Designing Details :

• Size of water supply unit determines the quantity of water and pressure required which differs from site to site.
• Reliability and efficiency of system truly depends upon proper selection of pump set and accessories.
• System is only reliable if pump selection is done by an experienced and technical person.
• Pipe and fittings used should have the capacity to withstand design pressure.
• Care should be while dismantling the system for maintenance.
• Necessary control features should be provided for pump protection.

Application

• Softening of utility water in homes, hotels, resorts
• Softening of boiler feed water
• Softening of industrial water

Water softening: Why & How?The presence of certain metal ions like Calcium and Magnesium in water causes a variety of problems. These ions interfere with the action of soaps. They also lead to build up of limescale, which can foul plumbing, and promote galvanic corrosion, fail hot water system. Hard water are also making problems with skin and hair.
Water softening is the removal of calcium,  magnesium, and certain other metal cations in hard water. The resulting soft water is more compatible with soap and extends the lifetime of plumbing.
Water softening is usually achieved using ion-exchange resins. Ion exchange resins are organic polymers containing anionic functional groups to which the dications (Ca++) bind more strongly than monocations (Na+). When all the available Na+ ions have been replaced with calcium or magnesium ions, the resin must be re-charged by eluting the Ca2+ and Mg2+ ions using a solution of sodium chloride or sodium hydroxide depending on the type of resin used.

We are the distributor for ZILMET in INDIA, who is an international manufacturer of high quality expansion tanks and plate heat exchangers since more than 50 years. ZILMET is leader in the world thermo-hydraulic market with objective of constant research of new products and innovative solutions.

AdvantagesCompact design with a seamless diaphragm, that never stretches or creases. There are no bubbles or corners to trap sediment, inhibiting bacterial growth; International approvals for use with potable water. Wide range available (from 2 to 600 litres).

Technical FeaturesProtected pre charge valve. Durable steel tank. Deep drawn steel shell for extra strength. MIG welding process eliminates interior rough spots and sharp edges and prevents damage to diaphragm and liner. Pre-pressurized air chamber. Butyl diaphragm isolates water from air. Exclusive internal epoxy coating : no corrosion. External epoxy-polyester coating : no rusting.  
ApplicationsElectric Pumps, Anti-Water Hammer, Water Heaters

• Pumping system
• Anti water hammering
• Water heaters
• Booster sets

• Pumping system
• Anti water hammering
• Fire fighting booster sets
• RO plants

• Dependable
• Outstanding performance
• Affordable prices
• Convenient

• Hydro Pneumatic Tanks / Pressure Tank / Bladder Tanks / Diaphargm Tanks
• Horizontal Multistage Pumps, Vertical Multistage Pumps.
• Multistage Submersible, Mono Submersible , Monoset, Self Priming Pumps.
• Jet Pumps / Centrifugal Water Pumps, Fountain Pumps.
• Dewatering (polder) Pumps
• Sewage Submersible Pumps (drainage Pumps
• PRessure Switches (telemechanique / Square D / Dnfoss)
• Non Return Valve, Check Valves , Spring Loaded Multidirection Check Valves
• RB Nrv, Rb Foot Valve
• Brass Five Way Connector, Three Way Connector
• Electronic Press Control, Press Control Switches, Fluid Control
• Swimming Pool Filter
• Swimming Pool Filter Pump
• Swimming Pool Side Equipment like Gratting, Multifloor Wall Inlet, Skimmer, Vaccum Port
• Swimming Pool Maintanance Equipment like Suction Sweeper, Vaccum Head, Wall Brush, Alge Brush, Telescopic Handle, Deep Rack
• Swimming Pool Chemicals like Tcca, Liquid Chlorine, Chlorine Granulars, Poly Aluminium Chloride, Hydrochloric Acid.
• Water Treatment Equipments like Membarne, Membarne Housing, Frp Vessel, Dosing Pumps.
• Softener Auto Valves
• Single Jet Water Meters, Multijet Water Meters, Woltman Type Water Meters

• Pressure Pump, Pressure Boosting System, Twin Pump System
• Filxed Speed Hydro Pneumatic Systems, Varaible Speed (vfd) Hydro Pneumatic System
• Industrial Ro Plants
• Manual Water Softener
• Automaic Water Softener
• Swimming Pool Filteration Plant
• Water Meters with Automatic Reading Solution System
• Ir Base / Gsm Base / Cdma Base / Radio Frequency Based Automatic Water Meter Raeding Solution System
• Wired or Wireline Base Water Meter Reading Solution System.