WANGDA MACHINERY

RMV 2nd Stage, Bangalore, Karnataka

The brick machine JZK50/45-3.0 is used to process raw material like clay, shale, coal gangue, fly ash, slag, mountain mud, silt, etc. into solid bricksand perforated bricks with strong mixing, vacuum processing, and powerful extrusion.Mixer shaft in above stage, main shaft of trowel and the body of machine are enhanced by aging, quenching and tempering;Reducer gear has hard tooth surfaces;Clutch adopts screw press technology, which improves the service life of our brick machines.With reasonable design, compact structure, this brick machine can operate stably without having to install anchor bolt and greatly reduce the power consumption caused by vibration.This brick machine is able to make the wastes profitable as well as saving energy with obvious economic and social benefits.

The turning system of the brick turning machine is the grouping system of brick setting machine, which is mainly applied to controlling bricks direction making the bearing surface downwards of hollow bricks. So that deformation of hollow bricks wont happen and increasing bearing capacity.

Capacity: 18, 000-25, 000 standard bricks per hour

The shale brick machine produced by Wangda Machinery is a vacuum brick extruding machine which owns the features of rational structure, big pressing force, strong rigid, seal dust-proof, circulating lubrication, simple operation, durable and high output. The feeder speed part and back wheel rotation part of the shale brick machine adopt advanced technology with big power transmission, smooth running, accurate position, less maintenance and so on.

Raw material can be coal gangue, clay and fly ash besides shale. Brick produced by the shale brick machine are widely used in construction and other industries;Diverse surface texture of finished products;High-temperature sintering with good durability and big compressive strength;Stable brick color, natural color never fade, shows classical and warm beauty;Good moisture absorption to adjust the room climate;Need to use sand cushion;Easy maintenance.

A perforated brick machine is a brick making machine extruding perforated bricks with many small holes in the bricks. Wangda Machinery provides brick machine of perforated with different capacities from 10, 000-22, 000pcs/h.Description of thisBrick Machine:Our brick machine is a brick making machine extruding perforated bricks with many small holes in the bricks. Wangda Machinery provides perforated brick machine with different capacities from 10, 000-22, 000pcs/h.

Types of Wangda perforated brick machine: JZK70/60-4.0; JZK55/55-4.0; JZK50/50-3.5 andJZK50/45-3.0;Raw material: Clay, shale, coal or fly ash, etc.Holes in the bricks are small in size but large in number. Small Holes area 25% and holes diameter 22mm.Types of perforated brick: Type-P (240mm115mm90mm) and Type-M (190mm190mm90mm)Application of perforated brick: Mainly used for load bearing.

Shouldtheperforated brick machine or any other products be of interest to you, please do not hesitate to contact us or complete the form below, and we will response to you as soon as possible.

Wangda sintered brick machine is advanced two-stage vacuum extruding machine with different capacities and models. Sintered brick machine is employed to make sintered bricks from raw materials such as clay, shale, fly ash, lime sand, gangue, cinder, construction wastes, etc. After firing, the bricks extruded from this brick machine has the features of high strength, good sound insulation, excellent shock-resistant, etc.

The sintered brick machine are made of high quality steel with features of reasonable structure, powful extrusion, high vacuum degree, good durability, etc. They are applicable for the production of sintered bricks such as solid brick, load-brering perforated brick , and high-rate hollow bricks with the materials

JZK50/45-3.0 10, 000-14, 000 m³/h JZK50/50-3.512, 000-16, 000 m³/h JZK55/55-4.016, 000-20, 000 m³/hJZK70/60-4.018, 000-22, 000m³/h