HJ110 series AMF controllers are designed to control the Standard AMF logic, prevalent

in the power generation industry. Because of its compact and powerful design, external wiring and components are reduced to the minimum, which enhances the overall performance of the AMF panels.

Basic functions of Hj110 SP and HJ110 TP, are same, except that HJ110 SP is meant for the single phase generators and HJ110 TP has necessary operational differences related to three phase generators. We also have BT110 series AMF CONTROLLERS, which are powerful and dedicated AMF controllers for Mobile / Telecom BTS Shelters, providing complete power management. It comprises of Intelligent AMF controller for generator, Mains Supply Monitor, shelter Battery Monitor, Remote Fault alarms and much more.

Exclusive shelter battery monitoring avoids unnecessary running of generator. Generator running hours depend on the BTS Battery condition, hence, reducing overall running of generator, resulting in low maintenance and trouble free running for longer periods.

Features of HJ110 Series AMF Controllers

Displays Load On Mains/Gen, Voltage, Current, KVA, Frequency and Generator RPM

Displays individual AMF timers in progress, in countdown mode

Different messages related to Engine and Electrical faults are also available for the user

Built in Line Voltage Monitor (LVM) to ensure safety of electrical load connected to panel

Built in Genset Voltage Monitor, for the safety of generator and connected load

Built in timers for : Mains Wait Time, Cranking Wait, Cranking ON, Cranking OFF, Cranking Attempts, Stop Solenoid, Engine Idle Run, and are programmable at site

Built in Engine Safety for Low Oil pressure, High Coolant temperature and Start failure (Fail To Start)

Other inputs(on request): Low fuel level alarm, Emergency Stop, Fail to Stop Alarm, etc

Mode of operation: OFF, Auto, Manual and Program

Auxiliary contacts for Mains Contactor, Alternator Contactor, Start, Stop, Fail to Start, etc

Programmable parameters for Mains Wait Timer, Generator Wait Timer, Crank Wait Timer, Crank On Timer, Crank Off Timer, Crank Attempts, Stop Solenoid Timer, Idle Run Timer, Mains Over/Under Voltage, Generator Over/Under Voltage, Voltage Trip Time, CT rating

Password protection to prevent unauthorized access to program menu

Waders presents the microcomputer based Automatic Water Level Controller, the ultimate water filling system, to take care of daily task of water filling. It is available in 8 models to cover full range of water pumps from domestic pumps to giant 3 phase water pumps. The water pump is plugged into the system and pump is automatically switched ON and OFF, when required. Automatic Water Level Controller can be used to remove used water from the storage tanks, automatically.

Features At A Glance

The foremost purpose of the system is to make the user free of all his daily water filling requirements.

All the operational states are displayed digitally through 7 segment display.

Easy to control auto and manual mode.

It monitors low and high level in the tank. The pump is switched ON, when water level goes below low level. And pump is switched OFF, when tank gets full. So that, there is no chance of dry running or over flowing.

It can also be used in dual tank systems, when it is required to monitor the ground tank as well as the over head tank.

It can also be used to remove water from the storage tanks.

Models available from any single or three phase pump

With the help of two sensors, it keeps an eye on the inlet water supply as well as over head tank.

As soon as it senses water at the inlet, pump is switched ON. So the user does not have to worry about the arrival of the water supply.

So the whole process is completely automatic, Waders Automatic Water Level Controller helps in saving water and electricity, as well as it reduces the trouble of daily water filling process.

HJ110 series AMF controllers are designed to control the Standard AMF logic, prevalent

in the power generation industry. Because of its compact and powerful design, external wiring and components are reduced to the minimum, which enhances the overall performance of the AMF panels.

Basic functions of Hj110 SP and HJ110 TP, are same, except that HJ110 SP is meant for the single phase generators and HJ110 TP has necessary operational differences related to three phase generators. We also have BT110 series AMF CONTROLLERS, which are powerful and dedicated AMF controllers for Mobile / Telecom BTS Shelters, providing complete power management. It comprises of Intelligent AMF controller for generator, Mains Supply Monitor, shelter Battery Monitor, Remote Fault alarms and much more.

Exclusive shelter battery monitoring avoids unnecessary running of generator. Generator running hours depend on the BTS Battery condition, hence, reducing overall running of generator, resulting in low maintenance and trouble free running for longer periods.

Features of HJ110 Series AMF Controllers

Displays Load On Mains/Gen, Voltage, Current, KVA, Frequency and Generator RPM

Displays individual AMF timers in progress, in countdown mode

Different messages related to Engine and Electrical faults are also available for the user

Built in Line Voltage Monitor (LVM) to ensure safety of electrical load connected to panel

Built in Genset Voltage Monitor, for the safety of generator and connected load

Built in timers for : Mains Wait Time, Cranking Wait, Cranking ON, Cranking OFF, Cranking Attempts, Stop Solenoid, Engine Idle Run, and are programmable at site

Built in Engine Safety for Low Oil pressure, High Coolant temperature and Start failure (Fail To Start)

Other inputs(on request): Low fuel level alarm, Emergency Stop, Fail to Stop Alarm, etc

Mode of operation: OFF, Auto, Manual and Program

Auxiliary contacts for Mains Contactor, Alternator Contactor, Start, Stop, Fail to Start, etc

Programmable parameters for Mains Wait Timer, Generator Wait Timer, Crank Wait Timer, Crank On Timer, Crank Off Timer, Crank Attempts, Stop Solenoid Timer, Idle Run Timer, Mains Over/Under Voltage, Generator Over/Under Voltage, Voltage Trip Time, CT rating

Password protection to prevent unauthorized access to program menu

Waders presents the microcomputer based Automatic Water Level Controller, the ultimate water filling system, to take care of daily task of water filling. It is available in 8 models to cover full range of water pumps from domestic pumps to giant 3 phase water pumps. The water pump is plugged into the system and pump is automatically switched ON and OFF, when required. Automatic Water Level Controller can be used to remove used water from the storage tanks, automatically.

Features At A Glance

The foremost purpose of the system is to make the user free of all his daily water filling requirements.

All the operational states are displayed digitally through 7 segment display.

Easy to control auto and manual mode.

It monitors low and high level in the tank. The pump is switched ON, when water level goes below low level. And pump is switched OFF, when tank gets full. So that, there is no chance of dry running or over flowing.

It can also be used in dual tank systems, when it is required to monitor the ground tank as well as the over head tank.

It can also be used to remove water from the storage tanks.

Models available from any single or three phase pump

With the help of two sensors, it keeps an eye on the inlet water supply as well as over head tank.

As soon as it senses water at the inlet, pump is switched ON. So the user does not have to worry about the arrival of the water supply.

So the whole process is completely automatic, Waders Automatic Water Level Controller helps in saving water and electricity, as well as it reduces the trouble of daily water filling process.