Description :

• When applied start working in 3-4 Hours with excellent water repellency protect your house for years and years
• Ready-to-use, penetrating, breathable water repellent sealer for construction.
• It is a ready-to-use water repellent sealer for walls, terrace, bathrooms, basement & for other cement based products.
• It can also be used on brick walls to prevent dampness.
• Made In India
• Eco Friendly

Description:

• When applied start working in 3-4 Hours with excellent water repellency protect your house for years and years
• Ready-to-use, penetrating, breathable water repellent sealer for construction.
• It is a ready-to-use water repellent sealer for walls, terrace, bathrooms, basement & for other cement based products.
• It can also be used on brick walls to prevent dampness.
• Made In India
• Eco Friendly

Description:

• SCWR-20 is a dilutable water repellent sealer specially designed for mineral construction material as well as mineral objects. Its property of water repellency makes the mineral surface last longer.

The technology of SCWR-20:

• SCWR-20 is based on an advanced technology that reacts with atmospheric carbon dioxide to form a protective layer inside the surface of the mineral substrate. This protective layer is responsible for the products excellent hydrophobic effect and improves the life as well as the appearance of the mineral substrate.

Key features of SCWR-20:

• Water repellency
• Decreased humidity in the house if applied on roof tiles
• Good penetration
• Breathable
• Improves life of the substrate
• Protects from efflorescence
• Easy dilution with waterSolvent-free
• Environment friendly

Suitable for:

• Low-fired clay products immediately after they have been made, e.g. roofing tiles, facing bricks, floor tiles, flower pots, etc.
• Main terrace
• Aerated concrete
• Gypsum and Gypsum-based fiberboards
• Light fillers, such as perlite, vermiculites, and aerated concrete granules

Not suitable for:

• Painted or colored surfaces

Surface preparation:

• Clean and dry the surface before application.
• The surface should be free from grease, dirt, moss, algae, fungus, or efflorescence.

Application:

• Read the entire label before using
• Test patch a surface before application.
• Dilute the product before applying in the ratio of 1:20 (1 parts SCWR-20 and 20 parts water)
• Spraying the product on the surface is the preferred method of application for facing bricks and floor tiles.
• Dipping the substrate in the product for 30 to 60 sec is the preferred method of application for roof tiles and flower pots.
• The surface on which the product is applied should stay dry for 24hrs after application.

Desired results after application of SCWR-20 :

• The product starts curing within few hours of application and is completely cured after 24hours of application and is ready-to-use.

Cleaning of equipment:

• By using water with soap or detergent

Storage:

• Best before the date mentioned on the batch.
• In case of cream formation, brief stirring will restore the original form.

Care of product:

• Dont keep it in direct sunlight.
• Tight pack the container after use to maintain the product quality.
• Dont use the product after 24 hrs of dilution.

Special note:

• The aforementioned data is agreed quality of the product at the time of production and checking the quality during approval. The data are controlled at regular intervals as a part of our quality assurance program Neither these data nor the properties of product specimen shall imply any legal binding of certain properties or of fitness for a specific purpose. It is users responsibility to check the substrate and compatibility or suitability of the product for deemed application. For further information or for any query, Please consult your local Shrinath Chemicals representative.

Description:

• SCWR-50 is a ready-to-use water repellent with advanced technology based on silicate concentrate. It renders hydrophobicity and strength to the mineral substrate.

The technology of SCWR-50:

• SCWR-50 is an impregnating water repellent based on silicate concentrate. It penetrates in surface to form a meshwork-like structure under the surface. This meshwork-like structure imparts water repellency leaving the surface breathable and permeable to water vapors. This decreases the chances of humidity inside the surface.

Key features of SCWR-50:

• Water repellency
• Breathable
• High penetration & Fast curing
• Excellent beading effect
• Reduces soluble salt uptake
• Colorless treatment
• Resistant to alkalis
• Reduces power consumption to 20% by decreasing humidity
• Consolidation

Suitable for:

• Absorbent mineral substrate like bricks, sand-lime bricks, natural sandstone, mineral plaster, etc.
• Implant impregnation of aerated brick, clay, sand-lime brick, fibrous cement, mineral fibers, etc.
• As water repellent primer for emulsion paints, plaster, silicone resin emulsion paints, silicon emulsion plaster.
• In the mass treatment of non-load bearing concrete products.

Suitable for:

• Water repellent for low-fired clay products. (roofing tiles, floor tiles, bricks, terracotta)
• Water repellent for various natural stones, sandstone, gypsum Etc.
• Consolidation and hydrophobization of mineral construction material and stone.
• Restoration of natural stone

Not suitable for

• Glass, wood, metal, plastics

Surface preparation

• The surface should be air-dried and clean for the best results.
• The surface should be free from dirt, grease, moss, algae, fungus, or efflorescence.
• Surface cleaning may be done by sandblasting, water blasting, simply by washing, or by Shrinath Chemicals cleaner.

Application

• Read the entire label before using it.
• Test patch a surface before application.
• Dipping method: substrate can be dipped in SCWR-50. Contact time would range from 5s to few minutes.
• Using a spray gun.
• For exteriors, if it starts raining immediately stop the application and cover freshly applied areas.

Cleaning of equipment:

• Clean with water using soap or detergent

Precautions

• Should be applied only to fully cured new or old surfaces.
• Protect against rain for at least 4hr after application.
• The substrate should not be sealed in an airtight container right after the application of SCWR-50.
• While application, any alkali sensitive material should be kept away.

Care of product:

• Don't keep under direct sunlight.
• Tight pack the container after use to maintain the product quality.

Special note

• The aforementioned data is agreed quality of the product at the time of production and checking the quality during approval. The data are controlled at regular intervals as a part of our quality assurance program Neither these data nor the properties of product specimen shall imply any legal binding of certain properties or of fitness for a specific purpose. It is users responsibility to check the substrate and compatibility or suitability of the product for deemed application. In case of queries contact your local Shrinath Chemicals representative.

Description:

• SR-Polymer is a water-dilutable water-proofing agent. It is based on the time-tested properties of acrylic polymer to give an excellent water-proofing effect to the surface. It is most commonly used for water-proofing the roof surface and the bathroom flooring and walls.

The technology of SR-Polymer:

• SR-Polymer forms a very thin coating on the surface. This coating effectively resists water to enter the surface and makes the surface water-proof.

Key features of SR-Polymer:

• Water resistance
• Corrosion and rust resistance
• Wethering resistance
• Effective in treating cracks
• Even cures in a damp environment
• Cost-effective
• Solvent-free
• Environment friendly
• Does not changes the color of the surface

Suitable for:

• Water-proofing of mineral substrates, especially for terrace and bathroom areas.
• Treatment of leaking cracks.

Surface preparation:

• Clean and dry the surface before application.
• The surface should be free from grease, dirt, moss, algae, fungus, efflorescence.
• Any excess cement residue should be scraped off the surface before application.

Application:

• Read the entire label before using
• Test patch a surface before application.
• Dilution: Dilute SR-Polymer in the ratio of 1:4 using water (1parts SR-Polymer in 4 parts water)
• For surface treatment: Rollers, brushes, spray guns may be used.

Desired results after application of SR-Polymer:

• The product starts curing within few hours of application and is completely cured after 24hours of application and is ready to use

Cleaning of equipment:

• By using water with soap or detergent

Storage:

• Best before the date mentioned on the batch.
• In case of cream formation, brief stirring will restore the original form.

Care of product:

• Dont keep it in direct sunlight.
• Tight pack the container after use to maintain the product quality.

Special note:

• The aforementioned data is agreed quality of the product at the time of production and checking the quality during approval. The data are controlled at regular intervals as a part of our quality assurance program Neither these data nor the properties of product specimen shall imply any legal binding of certain properties or of fitness for a specific purpose. It is users responsibility to check the substrate and compatibility or suitability of the product for deemed application. For further information or for any query, Please consult your local Shrinath Chemicals representative.

Description:

• SCWR-100 is a ready-to-use water repellent with advanced technology based on silane and siloxane emulsion. It is used for porous stones as well as concrete.

The technology of SCWR-100:

• SCWR-100 is an impregnating water repellent based on silane and siloxane emulsion. It penetrates the surface and forms a meshwork-like structure under the surface. This meshwork-like structure imparts water repellency to the surface leaving the surface breathable. The breathable surface allows permeability to water vapors beneath the surface thus decreasing chances of humidity inside the surface.

Key features of SCWR-100:

• Water repellency
• Good penetration
• Breathable
• Resistant to alkalis
• Good adhesive for paints
• Environment friendly
• Does not changes the color of the surface

Suitable for:

• Low-fired clay products immediately after they have been made, e.g. roofing tiles, facing bricks, floor tiles, flower pots, etc.
• Main terrace
• Aerated concrete
• Gypsum and Gypsum-based fiberboards
• Light fillers, such as perlite, vermiculites, and aerated concrete granules

Not suitable for:

• Painted or colored surfaces

Surface preparation:

• Clean and dry the surface before application.
• The surface should be free from grease, dirt, moss, algae, fungus, or efflorescence.

Application:

• Read the entire label before using
• Test patch a surface before application.
• Dilute the product before applying in the ratio of 1:20 (1 parts SCWR-20 and 20 parts water)
• Spraying the product on the surface is the preferred method of application for facing bricks and floor tiles.
• Dipping the substrate in the product for 30 to 60 sec is the preferred method of application for roof tiles and flower pots.
• The surface on which the product is applied should stay dry for 24hrs after application.

Desired results after application of SCWR-20 :

• The product starts curing within few hours of application and is completely cured after 24hours of application and is ready-to-use.

Cleaning of equipment:

• By using water with soap or detergent

Storage:

• Best before the date mentioned on the batch.
• In case of cream formation, brief stirring will restore the original form.

Care of product:

• Dont keep it in direct sunlight.
• Tight pack the container after use to maintain the product quality.
• Dont use the product after 24 hrs of dilution.

Special note:

• The aforementioned data is agreed quality of the product at the time of production and checking the quality during approval. The data are controlled at regular intervals as a part of our quality assurance program Neither these data nor the properties of product specimen shall imply any legal binding of certain properties or of fitness for a specific purpose. It is users responsibility to check the substrate and compatibility or suitability of the product for deemed application. For further information or for any query, Please consult your local Shrinath Chemicals representative.

Key Benefits:

• Base Coat for emulsion paints and putty
• For Interior and exterior
• Reduces cost of painting by easy application
• Rich whiteness after the coating dries
• It can be also used as a ceoling white
• Extra coverage over other similar products
• No VDC hence an Eco-Friendly product.

Description :

• When applied start working in 3-4 Hours with excellent water repellency protect your house for years and years
• Ready-to-use, penetrating, breathable water repellent sealer for construction.
• It is a ready-to-use water repellent sealer for walls, terrace, bathrooms, basement & for other cement based products.
• It can also be used on brick walls to prevent dampness.
• Made In India
• Eco Friendly

Description:

• When applied start working in 3-4 Hours with excellent water repellency protect your house for years and years
• Ready-to-use, penetrating, breathable water repellent sealer for construction.
• It is a ready-to-use water repellent sealer for walls, terrace, bathrooms, basement & for other cement based products.
• It can also be used on brick walls to prevent dampness.
• Made In India
• Eco Friendly

Description:

• SCWR-20 is a dilutable water repellent sealer specially designed for mineral construction material as well as mineral objects. Its property of water repellency makes the mineral surface last longer.

The technology of SCWR-20:

• SCWR-20 is based on an advanced technology that reacts with atmospheric carbon dioxide to form a protective layer inside the surface of the mineral substrate. This protective layer is responsible for the products excellent hydrophobic effect and improves the life as well as the appearance of the mineral substrate.

Key features of SCWR-20:

• Water repellency
• Decreased humidity in the house if applied on roof tiles
• Good penetration
• Breathable
• Improves life of the substrate
• Protects from efflorescence
• Easy dilution with waterSolvent-free
• Environment friendly

Suitable for:

• Low-fired clay products immediately after they have been made, e.g. roofing tiles, facing bricks, floor tiles, flower pots, etc.
• Main terrace
• Aerated concrete
• Gypsum and Gypsum-based fiberboards
• Light fillers, such as perlite, vermiculites, and aerated concrete granules

Not suitable for:

• Painted or colored surfaces

Surface preparation:

• Clean and dry the surface before application.
• The surface should be free from grease, dirt, moss, algae, fungus, or efflorescence.

Application:

• Read the entire label before using
• Test patch a surface before application.
• Dilute the product before applying in the ratio of 1:20 (1 parts SCWR-20 and 20 parts water)
• Spraying the product on the surface is the preferred method of application for facing bricks and floor tiles.
• Dipping the substrate in the product for 30 to 60 sec is the preferred method of application for roof tiles and flower pots.
• The surface on which the product is applied should stay dry for 24hrs after application.

Desired results after application of SCWR-20 :

• The product starts curing within few hours of application and is completely cured after 24hours of application and is ready-to-use.

Cleaning of equipment:

• By using water with soap or detergent

Storage:

• Best before the date mentioned on the batch.
• In case of cream formation, brief stirring will restore the original form.

Care of product:

• Dont keep it in direct sunlight.
• Tight pack the container after use to maintain the product quality.
• Dont use the product after 24 hrs of dilution.

Special note:

• The aforementioned data is agreed quality of the product at the time of production and checking the quality during approval. The data are controlled at regular intervals as a part of our quality assurance program Neither these data nor the properties of product specimen shall imply any legal binding of certain properties or of fitness for a specific purpose. It is users responsibility to check the substrate and compatibility or suitability of the product for deemed application. For further information or for any query, Please consult your local Shrinath Chemicals representative.

Description:

• SCWR-50 is a ready-to-use water repellent with advanced technology based on silicate concentrate. It renders hydrophobicity and strength to the mineral substrate.

The technology of SCWR-50:

• SCWR-50 is an impregnating water repellent based on silicate concentrate. It penetrates in surface to form a meshwork-like structure under the surface. This meshwork-like structure imparts water repellency leaving the surface breathable and permeable to water vapors. This decreases the chances of humidity inside the surface.

Key features of SCWR-50:

• Water repellency
• Breathable
• High penetration & Fast curing
• Excellent beading effect
• Reduces soluble salt uptake
• Colorless treatment
• Resistant to alkalis
• Reduces power consumption to 20% by decreasing humidity
• Consolidation

Suitable for:

• Absorbent mineral substrate like bricks, sand-lime bricks, natural sandstone, mineral plaster, etc.
• Implant impregnation of aerated brick, clay, sand-lime brick, fibrous cement, mineral fibers, etc.
• As water repellent primer for emulsion paints, plaster, silicone resin emulsion paints, silicon emulsion plaster.
• In the mass treatment of non-load bearing concrete products.

Suitable for:

• Water repellent for low-fired clay products. (roofing tiles, floor tiles, bricks, terracotta)
• Water repellent for various natural stones, sandstone, gypsum Etc.
• Consolidation and hydrophobization of mineral construction material and stone.
• Restoration of natural stone

Not suitable for

• Glass, wood, metal, plastics

Surface preparation

• The surface should be air-dried and clean for the best results.
• The surface should be free from dirt, grease, moss, algae, fungus, or efflorescence.
• Surface cleaning may be done by sandblasting, water blasting, simply by washing, or by Shrinath Chemicals cleaner.

Application

• Read the entire label before using it.
• Test patch a surface before application.
• Dipping method: substrate can be dipped in SCWR-50. Contact time would range from 5s to few minutes.
• Using a spray gun.
• For exteriors, if it starts raining immediately stop the application and cover freshly applied areas.

Cleaning of equipment:

• Clean with water using soap or detergent

Precautions

• Should be applied only to fully cured new or old surfaces.
• Protect against rain for at least 4hr after application.
• The substrate should not be sealed in an airtight container right after the application of SCWR-50.
• While application, any alkali sensitive material should be kept away.

Care of product:

• Don't keep under direct sunlight.
• Tight pack the container after use to maintain the product quality.

Special note

• The aforementioned data is agreed quality of the product at the time of production and checking the quality during approval. The data are controlled at regular intervals as a part of our quality assurance program Neither these data nor the properties of product specimen shall imply any legal binding of certain properties or of fitness for a specific purpose. It is users responsibility to check the substrate and compatibility or suitability of the product for deemed application. In case of queries contact your local Shrinath Chemicals representative.

Description:

• SR-Polymer is a water-dilutable water-proofing agent. It is based on the time-tested properties of acrylic polymer to give an excellent water-proofing effect to the surface. It is most commonly used for water-proofing the roof surface and the bathroom flooring and walls.

The technology of SR-Polymer:

• SR-Polymer forms a very thin coating on the surface. This coating effectively resists water to enter the surface and makes the surface water-proof.

Key features of SR-Polymer:

• Water resistance
• Corrosion and rust resistance
• Wethering resistance
• Effective in treating cracks
• Even cures in a damp environment
• Cost-effective
• Solvent-free
• Environment friendly
• Does not changes the color of the surface

Suitable for:

• Water-proofing of mineral substrates, especially for terrace and bathroom areas.
• Treatment of leaking cracks.

Surface preparation:

• Clean and dry the surface before application.
• The surface should be free from grease, dirt, moss, algae, fungus, efflorescence.
• Any excess cement residue should be scraped off the surface before application.

Application:

• Read the entire label before using
• Test patch a surface before application.
• Dilution: Dilute SR-Polymer in the ratio of 1:4 using water (1parts SR-Polymer in 4 parts water)
• For surface treatment: Rollers, brushes, spray guns may be used.

Desired results after application of SR-Polymer:

• The product starts curing within few hours of application and is completely cured after 24hours of application and is ready to use

Cleaning of equipment:

• By using water with soap or detergent

Storage:

• Best before the date mentioned on the batch.
• In case of cream formation, brief stirring will restore the original form.

Care of product:

• Dont keep it in direct sunlight.
• Tight pack the container after use to maintain the product quality.

Special note:

• The aforementioned data is agreed quality of the product at the time of production and checking the quality during approval. The data are controlled at regular intervals as a part of our quality assurance program Neither these data nor the properties of product specimen shall imply any legal binding of certain properties or of fitness for a specific purpose. It is users responsibility to check the substrate and compatibility or suitability of the product for deemed application. For further information or for any query, Please consult your local Shrinath Chemicals representative.

Description:

• SCWR-100 is a ready-to-use water repellent with advanced technology based on silane and siloxane emulsion. It is used for porous stones as well as concrete.

The technology of SCWR-100:

• SCWR-100 is an impregnating water repellent based on silane and siloxane emulsion. It penetrates the surface and forms a meshwork-like structure under the surface. This meshwork-like structure imparts water repellency to the surface leaving the surface breathable. The breathable surface allows permeability to water vapors beneath the surface thus decreasing chances of humidity inside the surface.

Key features of SCWR-100:

• Water repellency
• Good penetration
• Breathable
• Resistant to alkalis
• Good adhesive for paints
• Environment friendly
• Does not changes the color of the surface

Suitable for:

• Low-fired clay products immediately after they have been made, e.g. roofing tiles, facing bricks, floor tiles, flower pots, etc.
• Main terrace
• Aerated concrete
• Gypsum and Gypsum-based fiberboards
• Light fillers, such as perlite, vermiculites, and aerated concrete granules

Not suitable for:

• Painted or colored surfaces

Surface preparation:

• Clean and dry the surface before application.
• The surface should be free from grease, dirt, moss, algae, fungus, or efflorescence.

Application:

• Read the entire label before using
• Test patch a surface before application.
• Dilute the product before applying in the ratio of 1:20 (1 parts SCWR-20 and 20 parts water)
• Spraying the product on the surface is the preferred method of application for facing bricks and floor tiles.
• Dipping the substrate in the product for 30 to 60 sec is the preferred method of application for roof tiles and flower pots.
• The surface on which the product is applied should stay dry for 24hrs after application.

Desired results after application of SCWR-20 :

• The product starts curing within few hours of application and is completely cured after 24hours of application and is ready-to-use.

Cleaning of equipment:

• By using water with soap or detergent

Storage:

• Best before the date mentioned on the batch.
• In case of cream formation, brief stirring will restore the original form.

Care of product:

• Dont keep it in direct sunlight.
• Tight pack the container after use to maintain the product quality.
• Dont use the product after 24 hrs of dilution.

Special note:

• The aforementioned data is agreed quality of the product at the time of production and checking the quality during approval. The data are controlled at regular intervals as a part of our quality assurance program Neither these data nor the properties of product specimen shall imply any legal binding of certain properties or of fitness for a specific purpose. It is users responsibility to check the substrate and compatibility or suitability of the product for deemed application. For further information or for any query, Please consult your local Shrinath Chemicals representative.

Key Benefits:

• Base Coat for emulsion paints and putty
• For Interior and exterior
• Reduces cost of painting by easy application
• Rich whiteness after the coating dries
• It can be also used as a ceoling white
• Extra coverage over other similar products
• No VDC hence an Eco-Friendly product.