V. S. Metal

Bhuleshwar, Mumbai, Maharashtra

Copper laminated flexible jumper are manufactured by stacking several foils of electrolytic copper and then applying high current under high pressure. This is a special metal diffusion whereby the metal itself melts and forms homogenous bonds thus giving a very negligible, almost nil, mill volt drop across the connector, thereby reducing the temperature rise and increasing the current carrying capacity of the jumper. In this process, no filler metal is used to join two layers together. They have a constant cross section over whole length. The current carrying capacity of solid bus bar and copper laminated jumper manufactured by this process is the same. Therefore Laminated Copper flexible Jumper are a substitute for solid bus bar. Copper laminated flexible jumpers are manufactured by laminating high conductivity, electrolytic grade copper foils. These laminated foils are then sweated or pressure welded fused as per customers requirements. Such copper jumpers carry the same current as that of Bus bars as they have a constant cross section over the whole length giving a nil mili volt drop. So these jumpers are a best substitute for solid bus bars.

Galvanised Steel Earth Rods are made up of high Strength low carbonsteel and hot dip galvanized. This design of the rod is actually costeffective option for earthing.

VS solid copper earth rods are made from 99.9% pure electrolytic copper. Solid Copper rods offer greater resistance to corrosion.
They are ideally used in applications where soil conditions are very aggressive. For eg. Soil with high salt content.

Cast Ground Plate or Earth Plate
These Plates when used in concrete structures offer convenient ground system connection point. They are used where reinforcing bars are electrically continous & are to be used as down conductors. These earth points allow easy access for the lightning protection & earthing system.

Type AFL: Fixed conductor holderType AIL: Loose conductor holder.

These are used with 8 mm conductor or for supporting Air Terminals when used in conjuction with wall mounted Air Terminal base.

Material - G unmetal / Brass

These are used for bonding copper tape to Water main pipes.

Material - Gunmetal / Brass

These are suitable for bonding tape to Rain Water Pipes, Handrails etc.

Tape Clip Material - Copper / Brass / AluminumThese are used with Bare Copper Tape. Used to support Tape to structure.

Keeping in mind the varied needs and necessities of our customers. we are wholeheartedly affianced in presenting Triangle LED Bulb. In adherence with the global standards of excellence, these offered bulbs are made using top grade material and sophisticated techniques of production. Also, to maintain their safety, these are packed in top grade material while shipping at the end of our customers.

Features

• Precised dimensions
• Industry proven designs
• Hassle free operations

Product Details :

• Unique design
• Made from industrial grade polycarbonate
• Super bright 5630 LEDs
• Output :100 lumens/watt
• Aluminum Heat sink/pcb
• I C based driver with .9 power factor

Supplier & Wholesaler of Panel Light. Our product range also comprises of Tube Light, Tube Light Kits and LED Bulbs.

Panel Light

We are a trusted name to offer Panel Light that is widely demanded for its elegant design. Panel Light is available in the market in different sizes and designs. Further, the offered Panel Light is extensively used for illumination of light. Offered range is known to high performance and long life.

Features

• Easy installation
• Precisely engineered
• Quality tested

Above Bracket provides a 75 mm projection from the face of a wall. Manufactured either in Gunmetal or Brass.

Round LED Bulbs

Counted amongst one of the credible names, we are betrothed in offering a broad spectrum of Round LED Bulbs. Appreciated for their high functionality, reliability and hassle free operations, these offered bulbs are highly demanded and recommended. Moreover, these are well checked prior final shipment at the end of our customers.

Features :

• High illumination intensity
• Fine finish
• Low maintenance

FEATURES-

MATERIAL- Brass, Aluminum & Copper FEATURES- *Means of connection or an earth bond-around the cable gland.*Available in various shapes & in all sizes.*Ensure earth continuity between the electrical equipment & the gland.*Can be coated or plated as per Customer Specification.

Material - Gunmetal / Brass
These are used with Bare Copper Tape Conductor. Used to secure Tape to structure.

LED Tube Light

Being perfectly shaped and swift movement of our organization, we are instrumental in offering LED Tube Light. Our offered tube lights are installed on walls of household as well as commercial establishments. Suitable to work with all temperature, these tube lights are manufactured at our vendors end with the help of premium quality material and high-tech techniques. We offer these tube lights in different sizes & power for our clients.

Features

• Perfect brightness
• Compact size
• Low power consumption

T8 LED Tube Light (Clear Diffuser)

• Mainly useful for 20 ft ceiling height
• Useful with old glass fitting ( disconnect choke/starter)

For ordering BELL MOUTHED cable terminals prefixV143-TBto the product code nos. of Crimping Type Copper Tubular Cable Terminal ends.
For eg.V141-TH-120-12will beV143-TB-120-12

Circular Stranded Copper Conductor To DIN 48201 & Circular Stranded/Sector Shaped Conductor To DIN VDE 0295.

For taking Lightning Conductors through roofs etc.

(for attaching wire to wall)Snap - on mechanism & Base Made of Metal
Type AFL: Fixed conductor holder.Type AIL: Loose conductor holder.

Copper Bonded Grounding Rod / earth rod
VS copper bonded earth rod are made from low carbon Steel. Earth Rods are molecularly bonded with 99.9% pure electrolytic copper.

Salient Features-

• Perfectly Bonded rod will last longer, drive easier and will not crack.
• Corrosion resistance while providing the lowest resistance to ground.
• Threads are rolled by roll threading process, which ensures that an even copper covering is maintained, even at the roof of the thread. Roll thread gives greater strength than cut thread.
• Thread rolling process raises the surface of the rod, so that thread dia (T) is greater than shank dia. (S). As seen in figure: -

Coupler are made from copper alloy &
counter bored to completely enclose
threads, protecting them from damage
& corrosion.