V.S.International

Worli, Mumbai, Maharashtra

CLEVDFUGE is a compact Ex versatile centrifuge for use in Blood Banks S. Laboratories

• Stable speed output even under- unstable voltage conditions
• Imbalance and inverter fault protection with auto shut down
• Double armored break proof protection for inner chamber
• Acceleration S. Deceleration selectable in three steps
• Actual RCF Displayed on LCD
• Buzzer on Alarm
• Door Interlock
• Time totaliser
• Last Parameter recall

Salient Features

• Microprocessor based precise temperature control
• High performance 1.5 kw heater & compressor to achieve the set temp
• Over temperature safety limit. audio visual alarm
• LED monitor to display the working status of thawing bath
• Continuous water circulation for tamp uniformity S. rapid thawing
• Audio visual alarm after elapsed time

Salient Features

• Menu driven 51 program memory with tamper proof facility
• Option to centrifuge by setting either RPM or RCF (speed accuracy +10rpm)
• Time setting up to 99 minutes
• 9 Acceleration & 10 Deoeleration profiles
• Temperature range setting -10°C to 40°C
• Two Pre—cooIing program (4°C / 22°C)
• Dual LCD monitors displays set & run parameters
• Viewing window for RPM calibration
• Safety Features : Door interlock, imbalance cut-off & Over speed protection
• Key lock for authorized access
• Safety gas hinges prevents accidental door drop

• Heat the PCB reusable pouch in hot water till all the solid material turns into liquid in 10 min
• Place the pouch in baby tray compartment and lay the baby inside the incubator
• Temperature will remain 36-37C for atleast 3-4 hours until liquid material doesnt solidify again

Common Features

• Light Weight Construction made of Fibre Material brings down the weight of the incubator such that even a nurse can lift it. (Weight 7 15 Kgs)
• As overall size of incubator reduces, consumption of supplemental oxygen is also reduced. Oxygen flow of 2 litres/min can easily be sufficient.
• Dimensions: 26 x 15 x 15
• Baby Area : 21 x 13

Microprocessor controlled blood bank refrigerated centrifuge, designed for small to big size blood processing centers, Ideal for blood component separation like PRBC, PIateIet rich plasma, platelet concentrate or cryoprecipitate. Also useful for other specialized procedure like buffy coat separation

Applications:General Incubator is ideally suitable for any laboratory for application requiring a controlled temperature environment upto 70°C.

Advantages:

• Digital PID Temperature Controller with Timer, alarms and auto tuning.
• Eye level door mounted Controller for easy access and monitoring.
• Over temperature safety protection.
• Solid and plain bottom without electricals.
• Seamless round cornered edge of internal chamber ensures easy cleaning & prevents any leakage
• Transparent safety glass door.
• Supplied with wire mesh shelves. Shelf height adjustable in 25mm steps.
• Temp range: ambient +5ºC to 70ºC.
• Control accuracy: ±0.1ºC.

Applications:

• Ideal for sample pre-treatment in QC, for Serological tests in Pathology and all thermostating tests.

Advantages:

• Fully stainless steel, including bottom, makes it GMP standard & total rust proof.
• Easy to set & use direct digital setting & readout.
• Double walled full SS construction with glasswool insulation.
• Temperature Range: Ambient + 5 to 65C.
• Digital Temperature Controller cum Indicator 1C resolution.
• Energy efficient tubular heater.

Applications:

• Ideal for preservation of vaccines, study of synthesizing organisms, life cycle testing, shelf life studies, general incubation, refrigerated storage, cell culture process of animals & plants, microorganisms cultivation & desalting process of enzyme extract in Biology, Botany Virology, Oceanography, water pollution, sewage, agriculture, food and research departments.

Advantages

• Inner Chamber with rounded corners for easy cleaning & better performance.
• Inner door frameless made of tempered safety glass. Single piece inner door panel eliminates crevices & reduces contamination problems. Shelves adjustable made of stainless steel wire mesh.
• Inbuilt validation port to avoid gasket damage during validation.
• Chamber illumination with fluorescent light(s).

Applications:

• Ideal for constant temperature applications in Refractometry, Polarimetry, Rotational Viscometry, in biotechnologylaboratory for development of culture applications andgeneral laboratory work.
• Ideal for critical applications requiring a high degree of temperature accuracy and uniformity.

Advantages:

• Stirring achieved by an efficient, continuously rated, self cooling motor with SS shaft andpropeller of anti-corrosive material.
• Independent over-temperature self resetting safety cut-off with alarm.
• Full SS construction.
• Uniformity: 0.1C at 37C.
• Resolution: 0.1C
• CE certified

Applications:

• Ideal for preservation & reaction of samples, amplification of DNA, pre-denaturation of the electrophoresis, blood serum coagulation in molecular biology, histology, clinical, environmental and industrial settings.

Advantages:

• Equipped with microprocessor based controller for accurate control and regulates the high wattageheater to provide rapid heating.
• Two temperature control segments.
• Sample block easily removable for cleaning or replacement.
• Easy user calibration.
• End of cycle buzzer and heater cut-off.
• Absolute overshoot alarm at 105C.

MW-4C Compact model is designed for routine work in medical and industrial laboratories. It has digital speed indicator and 0-60 minute digital countdown timer.MW-4C DX has additional features of dynamic brake for quick deceleration & imbalance detector with cutoff in case of uneven loads.

Salient Features:

• Stepless speed regulator
• Safety Lid interlock to prevent cover opening during centrifugation
• Dynamic brake for quick deceleration (MW-4C DX)
• Imbalance detector with cutoff (MW-4C DX)

Technical Data

Special Purpose Centrifuge

• MW-8K Centrifuge incorporates stepless Speed Regulator, digital Timer and speed meter. It is specifically designed to suit the following special applications.
• Testing Diesel Fuel Filters for determination of Dust concentrate as per IS: 3351:1991. Useful for fuel filters for testing the purity and suitability of the oil.
• Test of Infant Milk Food as per IS: 1547:1985. For determination of solubility index in Infant Milk Foods
• For determination of Insolubility Index of dried milk and dried Milk products as per IS: 12759:1989.
• For determination of Sulphates in Chrome solution.

Laboratory Centrifuges model MW 8C & MW 8C DX are suitable for routine sample analysis in Medical, Hospital, Pathology and Institutional laboratories. With a wide choice of rotor heads and adaptors, these units are truly versatile.

Micro Centrifuges models MW 12C / MW 12C DX are ideal for growing routine application in biochemical and clinical labs, for Hematocrit, Corpuscle Percentage contents in blood, Serum analysis and precipitate separation etc.

DX models of Laboratory and Micro Centrifuges have additional features of dynamic brake for quick deceleration & Imbalance detector with cut off in case of uneven loads.

Salient Features:

• Digital Speed Indicator
• Stepless speed regulator
• 0-60 minutes digital countdown timer (MW-8C & MW-8C DX)
• 0-15 minutes digital countdown timer (MW-12C & MW-12C DX)
• Safety Lid interlock to prevent cover opening during centrifugation
• Press Switch for quick acceleration to full speed

Compufuges model MW-23 & MW-24 are Microprocessor controlled centrifuges used in auxiliary laboratories in industry, Educational & Research institutions, Bio Technology, Medical Laboratories , Hospitals , Blood Banks , Pharmaceutical laboratories and agriculture soil testing for determination of moisture equivalent of soil. It is also suitable for determination of settlement of paints, pastes, cosmetics and food products. Centrifuge rotors & carriers are also suitable for use with a variety of Falcon & Vacutainer tubes.

MW-23 & MW-24have soft touch keypads for fast and accurate setting of run parameters. Basic runs are easy with setting of speed, time, temperature, brake, acceleration and deceleration. Press start key and Compufuge does the rest for you. Brushless induction motor with frequency drive & unique automatic rotor identification ensures accurate speed setting for individual rotors. Over current overheating safety cutoff circuit is provided for motor protection. Safety lid interlock on the centrifuge ensures that the rotor does not run with cover open while the cover cannot be opened unless rotor comes to complete halt.

Salient Features:

• User friendly microprocessor control with Interactive LCD display
• Menu driven ten programme memory
• Choice of High brake, low brake and coasting
• Imbalance high detector with cutoff
• Safety lid interlock to prevent cover openingduring centrifugation
• Automatic unique safety rotor identification system
• Speed holding accuracy 100 RPM
• Self-diagnosis for errors

Revolutionary Research Centrifuges

MW-23 & MW 24centrifuges are widely used in auxiliary laboratories in industry, Educational & Research institutions, Bio Technology, Medical Laboratories, Hospitals, Blood Banks, Pharmaceutical laboratories and agriculture soil testing for determination of moisture equivalent of soil. It is also suitable for determination of settlement of paints, pastes, cosmetics and food products. Centrifuge rotors & carriers are also suitable for use with Variety of Falcon & Vacutainer Tubes.

Salient Features:

• Stepless speed regulator with zero start interlock
• Digital speed indicator
• Dynamic brake
• 0-99 minutes digital count down timer
• Imbalance detector with cutoff
• Safety lid interlock to prevent cover opening during centrifugation

Refrigerated Centrifuges are useful for centrifugation of temperature sensitive material and find applications in routine and research work in auxiliary laboratories in industry, Educational & Research institutions, Bio Technology, Medical Laboratories, Hospitals, Blood Banks, Pharmaceutical laboratories etc

The user has a choice of different types of control, i.e. Electronic Controls or Microprocessor based Controls. User can select models as per their requirements from high volume low speed Centrifuge model MW-23 BL / MW 23, low volume high speed centrifuge model MW-24 BL / MW- 24 in table top design & MW-30 BL / MW- 30 a compact high-speed high volume floor standing centrifuge.

BL series Centrifuges are Electronic controlled & MW series Compufuges are Microprocessor controlled centrifuges with temperature programming facility for temperature sensitive samples. All the Centrifuges have soft touch keypads for fast and accurate setting of run parameters. Basic runs are easy with setting of speed, time, temperature, brake, Press start key and Compufuge does the rest for you.

Brushless induction motor with frequency drive & unique automatic rotor identification ensures accurate speed setting for individual rotors. Over current overheating safety cutoff circuit is provided for motor protection. Safety lid interlock on the centrifuge ensures that the rotor does not run with cover open while the cover cannot be opened unless rotor comes to complete halt.

A unique safety feature of automatic rotor identification ensures proper speed setting for individual rotors to avoid danger of over speed running. Advanced manufacturing techniques are used for resilient mounting of heavy-duty brushless induction motor resulting in low level of vibration and noise.

Salient Features:

• Brush-less induction motor with frequency drive
• Precise speed control and reproducibility
• Pre setting of speed, temperature and time
• Speed holding accuracy 100 RPM
• Safety lid interlock to prevent cover opening during centrifugation
• Digital speed indicator, 0-99 minute digital count down timer with temperature indicator
• Dynamic brake
• Imbalance detector with cutoff
• Over current overheating safety cutoff for motor protection

Additional Features:(Microprocessor based models)

• Interactive alpha numerical LCD display
• Menu driven ten programme memory
• Choice of 9 acceleration and 9 deceleration profiles and coasting
• Self-diagnosis for errors
• Unique safety rotor identification

These newly developed compact bench top Cooling Centrifuges models MW-8 Plus and MW-12 Plus offers quiet operation with very small footprint.

Centrifuge model MW-8 Plus is suitable for routine sample analysis in Medical, Hospital, Pathology and Institutional laboratories. With a wide choice of rotor heads and adaptors, this unit is truly versatile.Micro Centrifuge model MW-12 Plus is useful for routine applications in bio-technology, PCR, life sciences, bio-chemical and clinical labs etc. This unit is ideal for centrifugation with micro tubes from 0.2 ml upto 1.5 ml.

Laboratory Centrifuges model MW-8C BL & MW-8M are suitable for routine sample analysis in Medical, Hospital, Pathology and Institutional laboratories. With a wide choice of rotor heads and adaptors, these units are truly versatile.

Micro Centrifuges models MW-12C BL & MW-12M are ideal for growing routine application in biochemical and clinical labs, for Hematocrit, Corpuscle Percentage contents in blood, Serum analysis and precipitate separation etc.

Leading Technology

• Brushless Induction motor with frequency drive
• Microprocessor controller with digital display
• Smooth & soft start
• Inverter fault detection with auto shutdown
• Safety
  • Safety lid interlock to prevent lid opening during centrifugation
  • Imbalance detection & centrifugation stop with display of error
  • Motor overload protection
  • Gas hinge to prevent door falling
  • Emergency lid lock release

• Models MW-8M & MW-12M are advanced versions having following additional features:

  • Feather touch setting keys
  • Alphanumeric LCD display of speed & RCF
  • Selection of 3 acceleration & deceleration profiles