Post Buy Requirement
VN
Manesar, Haryana, India
Add Review

Fire Alarm System #4493162

Conventional Fire Detection System

Conventional systems are the older type of fire alarm systems.The detector communicates with the fire alarm control panel simply by changing state from high impedance to low impedance when smoke is detected.Smoke detectors are typically wired together up to 32 detectors on each zone and a single fire alarm control panel can usually monitor a number of zones which can be arranged to correspond to different areas of a building.In the event of a fire, the fire alarm control panel is able to identify which zone contains the detector or detectors in alarm, but its not able to identify which individual detector or detectors is in an alarm state.
View Complete Details

Addressable Fire Detection System

A fire alarm system is number of devices working together to detect and alert people through visual and audio appliances when smokefire is present. These alarms may be activated from smoke detectors and heat detectors. Analog addressable Fire Detection devices are individually identified with an address (number) on a loop of wiring. The control panel communicates with each device in turn and each device reports back with an analog value based upon how much smoke or heat is present. The control panel, not the detector, then makes the decision to sound the alarm system. With an intelligent system, if a fire is detected, its position can be pin-pointed because each device has its own unique address which means its exact location can be found quickly.
View Complete Details

VESDA Fire Detection Systems

VESDA by Xtralis very early warning aspirating smoke detection solutions with continuous air sampling provide the earliest possible warning of an impending fire hazard. VESDA aspirating smoke detectors buy the critical time needed to investigate an alarm and initiate an appropriate response to prevent injury, property damage or business disruption. VESDA detectors have multi level warnings and a wide range of sensitivity that does not degrade or change over time, so even minute levels of smoke can be detected before a fire has time to escalate.VESDA early warning detectors are available in a variety of models to accommodate a broad range of environments and applications.From small to very large, open spaces and from the cleanest to the dirtiest environments, VESDA multi level detection provides reliable, high sensitivity, very early warning smoke detection.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

Retailer of Fire Alarm System from Manesar, Haryana by Vrinda Nano Technologies Pvt. Ltd.
Post Buy Requirement
VN

Vrinda Nano Technologies Pvt. Ltd.

Add Review

Our Products

  1. Aluminium,Tin & Metal Containers 3 Products available
  2. Fire Alarm System 3 Products available
  3. Electrical & Electronic Gadgets

    2 Products available
  4. Generators, Turbines & Power Plants

    1 Products available
  5. Surveillance Systems

    1 Products available
  6. Electric Control Panels

    1 Products available
  7. Construction Services

    1 Products available
  8. Safety Equipments

    1 Products available
  9. Switch Gears

    1 Products available
  10. Others Products 2 Products available

Fire Alarm System

We offer the best product range of Conventional Fire Detection system, Addressable Fire Detection System and VESDA Fire Detection Systems.

Conventional Fire Detection System

Conventional systems are the older type of fire alarm systems.The detector communicates with the fire alarm control panel simply by changing state from high impedance to low impedance when smoke is detected.Smoke detectors are typically wired together up to 32 detectors on each zone and a single fire alarm control panel can usually monitor a number of zones which can be arranged to correspond to different areas of a building.In the event of a fire, the fire alarm control panel is able to identify which zone contains the detector or detectors in alarm, but its not able to identify which individual detector or detectors is in an alarm state.
View Complete Details

Addressable Fire Detection System

A fire alarm system is number of devices working together to detect and alert people through visual and audio appliances when smokefire is present. These alarms may be activated from smoke detectors and heat detectors. Analog addressable Fire Detection devices are individually identified with an address (number) on a loop of wiring. The control panel communicates with each device in turn and each device reports back with an analog value based upon how much smoke or heat is present. The control panel, not the detector, then makes the decision to sound the alarm system. With an intelligent system, if a fire is detected, its position can be pin-pointed because each device has its own unique address which means its exact location can be found quickly.
View Complete Details

VESDA Fire Detection Systems

VESDA by Xtralis very early warning aspirating smoke detection solutions with continuous air sampling provide the earliest possible warning of an impending fire hazard. VESDA aspirating smoke detectors buy the critical time needed to investigate an alarm and initiate an appropriate response to prevent injury, property damage or business disruption. VESDA detectors have multi level warnings and a wide range of sensitivity that does not degrade or change over time, so even minute levels of smoke can be detected before a fire has time to escalate.VESDA early warning detectors are available in a variety of models to accommodate a broad range of environments and applications.From small to very large, open spaces and from the cleanest to the dirtiest environments, VESDA multi level detection provides reliable, high sensitivity, very early warning smoke detection.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us