Our Products
Brass Components
2 Products availableSheet Metal & Turned Components
2 Products availableMetal & Alloy Wires
1 Products availableIndustrial Shafts
1 Products availableBrass & Copper Products
1 Products availableCopper Wire
1 Products availableWe offer the best product range of Water Cooled Cable, water cooled jumper cables, Water Cooled Kickless Cable and air cooled cable.
Our quality of the product is very good I will make sure that in our product complaints will never come.
Experience us then you will get the result.
VR METALS AND ENGINEERS ISO 9001:2015 CERTIFIED COMPANY These cables are used as supplementary cable to connect jumper cable and gun are of the single conductor only. To meet the connector needs in the resistance welding operation. VR METALS offer a broad variety of secondary cable. Each cable is design and built to perform with maximum efficiency and economy in its in depended application. VR METALS water-cooled jumper (Aid)cable to electrically connect distant points which move in relation to each other such as,
The movable gun-arm of the certain types of welding guns to the VR METALS cable. On a multiple spot welding machines.
VR METALS water cooled jumper & sub cables are flexible rope types secondary connectors, assembling with high conductivity terminals. There are sheathed with reinforced abrasion & oil resistant hose. Free water passage is insured by means of an open spring core progressing the entire length of the cable. Thus permitting the cable to operate under the condition of acute bending without obstructing the water flow.
VR METALS AND ENGINEERS ISO 9001:2015 CERTIFIED COMPANY WE ARE MFG.Water Cooled Kickles/Jumpers are extra more flexible rope type secondary conductors with connector, swage- formed on each end for maximum flexibility & cooling.Design of Kickless Cable as per Customers Specification & Requirement and drawings.
High flexibility for good working efficiency.Special type of Rubber hose with the good flexibility and its Pressure Capacity more than 10 Kg/cm2 and protect to high temperature water for safe operation. Covering of good pressure resistance, heat resistance, wear resistances.Excellent cooling effect even in continued welding operation.Fantastic water testing units with Pressure 10 to 12 Kg/cm2, Each & every cable is tested.Little Impedance & little Reactance drop.Copper wire size is 33 Gauge for 300 MCM & 400 MCM as per Standard of RWMA.Accurate copper straight lug or copper bend lug with 100% Conductivity of copper.High resistance of repeating kicks & bending caused by electromagnetic force introduced by the welding current & welding operation, according long life.Good Quality product with Long Life and reasonable rate. Long cable life reduces. cable cost per weld – the true measure of cost cable. Easy for check & replacement & maintenance.The kickless cable is a consuming part required to be inexpensive. Immediately service is our motto.
The standard terminal width is 32 mm. if wide terminal is required, please specify when ordering.
TerminalsTerminals are made for soft electrolytic copper tube.Wire construction: - This is made from 0.05 mm2 electrolytic grade copper wire each bunch of herringbone construction to reduce the rate of wire fracture by providing the lateral surface wear areas. It is a total sectional area shall not be less than the appropriate sectional area per MCM/mm2 ratingWire connection to Terminals: - Wires are brazed crimped in the soft electrolytic copper Tube. Wire can not melt out during brief overheads.Flexible cover: - A loosely fitting rubber impregnated sheath encases most Cable styles for mechanical protection.Optional featureProtection sleeves: - In order to eliminate breakage of strands due to the frequent acute bending operation, protection sleeves are, provided on the area of both the terminals joints.
VR METALS AND ENGINEERS ISO 9001:2015 CERTIFIED COMPANY meet the connector needs in resistance welding VR METALS offers a broad variety of secondary connector. Each cable, secondary shunts are designed and built to perform with maximum efficiency & economy in its intended application. VR METALS air cooled jumpers cables are required to be electrically connecting distant points which move in relation to each other. Such as The movable gun–arm of certain types of welding guns to VR METALS cable.
On multiple spot welding machinesVR METALS AND ENGINEERS ISO 9001:2015 CERTIFIED COMPANY Offer air cooled jumpers are extra more flexible rope type secondary conductors with connector, swage- formed on each end for maximum flexibility & cooling. The standard terminal width is 32 mm. if wide terminal is required, please specify when ordering.
Terminals
Terminals are made for soft electrolytic copper tube. Wire construction: - This made from 0.05 mm2 electrolytic grade copper wire each bunch of herringbone construction to reduce that the rate of wire fracture by providing the lateral surface wear areas. It is a total sectional area shall not be less than the appropriate sectional area per MCM/mm2 rating.
Wire connection to Terminals: - Wires are brazed crimped in the soft electrolytic copper Tube. Wire can not melt out during brief overheads.
Flexible cover: - A loosely fitting rubber impregnated sheath encases most Cable styles for mechanical protection.
Optional feature
Protection sleeves: - In order to eliminate breakage of strands due to the frequent acute bending operation, protection sleeves are, provided on the area of both the terminals joints.