Our Products
South Total Station NTS-362R6is functioned by reflector-less distance measurement, range up to500mwhich is applicable for long distance measurement with high accuracy on various kinds of materials or colors such as wall, wire pole, wire, cliff, hill, earth, timber pile, etc. For those targets which are not easy or even impossible to reach, reflector-less distance measurement can complete the measurement task easily.
SOUTH Total Station NTS-362R6is embedded with various outstanding surveying programs, coupled with functions of data storing and parameter setting, which can be widely applied in various kinds of professional and construction survey.
Absolute Encoding DiskWith absolute encoding disk, you can start your work directly as the instrument is powered on. Azimuth angle will be saved even if the power is off incidentally in the job.
Six-line large LCDConvenient Management on Internal Memory. Huge capacity of internal memory enables you to easily complement file system management, including adding, deleting, modifying and transferring data.
SD card Function and USB interfaceSD card provides huge memory, fast speed of data transferring, incredibly flexibility and reliable safety. Saving various data of job into the SD card, you can easily read it just by inserting it into the SD port of your laptop. USB interface is the international mainstream for PC communication, with it your job must be much easier.
Reflectorless Distance Measurement
South Total station NTS-360R6series is functioned by reflector-less distance measurement, range up to500mwhich is applicable for long distance measurement with high accuracy on various kinds of materials or colors such as wall, wire pole, wire, cliff, hill, earth, timber pile, etc. For those targets which are not easy or even impossible to reach, reflector-less distance measurement can complete the measurement task easily.
Various Surveying ProgramsBesides of ordinary surveying programs, such series of total station also has special surveying programs, such as remote height measurement, offset measurement, remote distance measurement, stake out, resection, area calculation, road design and stake-out, etc., which are sufficient to meet the needs of professional measurement and surveying measurement.
Model | South NTS-362R6 |
Distance Measurement (fine weather condition) Max. Range | |
Reflectorless | 500m |
1 Prism | 5.0Km |
Accuracy | |
Reflectorless Fine Mode | 5+2ppm |
Reflectorless Tracking Mode | 10+2ppm |
Reflector (Prism) Fine Mode | 2+2ppm |
Reflector (Prism) Tracking Mode | 5+2ppm |
Reflector (Prism) IR Sheet Mode | 5+2ppm |
Reading | Max. 99999999.9999m; Min 0.1mm |
Measuring Time Reflectorless | Tracking mode: <0.5s; Fine mode:<1.2s |
Measuring Time Reflector (Prism) | Tracking mode: <0.5s; Fine mode:<1.2s; IR Sheet mode:<1.2s |
Atmospheric Correction | Manual inpur, Auto correction |
Atmospheric refraction ∧ Earth Curvature Correction | Manual inpur, Auto correction |
Prism Constant Correction | Manual inpur, Auto correction |
Distance Unit | Meter / U.S. Feet/International feet/Feet-inch selectable |
Angle Measurent | |
Measurement Method | Absolute continuous |
Raster Disk Diameter | 79mm |
Minimum Reading | 1″/5″ selectable |
Accuracy | 2″ |
Detection Method | Horizontal: Dual, Vertical: Dual |
Telescope | |
Image | Erect |
Length | 154mm |
Effective Aperture | Telescope: 45mm; (EDM: 50mm) |
Magnification | 30X |
Field of View | 1°30′ |
Resolving Power | 3″ |
Minimum Focusing Distance | 1m |
Auto Compensator | |
System | Dual axis Liquid-electric |
Compensation Range | ±3′ |
Accuracy | 3″ |
Level Sensitivity | |
Plate Vial | 30″/2mm |
Circular Vial | 8’/2mm |
Optical Plummet | |
Image | Erect |
Magnification | 3x |
Focusing Range | 0.5m ∼ ∞ |
Field of View | 5° |
On-board Battery | |
Type | Ni-H, Rechargeable |
Voltage | 6V (DC) |
Operating Time | 10 hours |
Others | |
Display | LCD, 6 Lines, Digital |
Data Communication | RS-232C, USB, SD Card |
Data Storage | 2M internal memory, Ready for 17,000 data blocks External upto 8GB SD Card |
IP Standard | IP65 |
Operating Temprature | -20°C ∼ +50°C |
Dimension | 160 x 150 x 330mm |
Weight | 5.2kg |
Sunway ATS-120R Total Stationis the most economical model, measures without prism up to 600m, configured with advanced dual axis compensator for automatic error elimination and automatic compensation of accuracy, diversified data transfer options such as card SD, USB pen drive, data cable interface.
This high precision total station is widely used in surveying, topography and cartography, engineering construction, is popular in the market of measuring instruments for its high precision, good quality, competitive price.
Sunway ATS-120R seriesTotal Station is used in engineering, produce by Suzhou Sunway Photoelectric Technology Co.Ltd., a subsidiary of a Hi-Target Surveying Instrument Co.Ltd.It have no prism measurement function, absolute encoder angle measurement technology, angle measurement accuracy 2 seconds, no prism measurement accuracy 3mm+ 2ppm and a breakthrough in the use of the STM32 architecture. Sunway ATS-120R series Total Station configures a variety of communication interfaces and smart calibration software implements the diversity of data transmission selection and real-time detection function.
Powerful and Fast EDM CapabillitySunway ATS-120R series Total Stations no prism measurement range up to 1000 meters. No prism measurement accuracy 3mm+2ppm. Accurate measurement 0.8S, Track measurement 0.3S.
STM32 ArchitectureThe STM32 MCU based on ARM CortexTM-M processor enables the total station has extra high processing speed and low-power consumption.
Intelligent CalibrationSoftwareAccessible for real-time diagnosis to ensure trouble-free operation. The software can determine 90 percent of the Problem.
Absolute Encoder Angle Measurement1023 pairs of absolutely coded disc. All Sunway ATS-120R Series angle measurement accuracy is two seconds. Starting without initialization.The data will save automatically when the power failure.
Stable Dual-axis CompensationCompensation range 3. Operation can be visualized and High accuracy of angle measurement.
Rich Communication and TransmissionWith RS232C, SD, USB and MiniUSB communication interface. Using Bluetooth for data transmission, make data transmission more convenient.
Reliable Large Volume MemoryInternal memory has 20, 000 points to record.USB memory can be used up to 8GB.
Model | ATS-120R Sunway Total Station |
Angle Measurement | |
Measurement Method | Absolute Encoding |
Minimum Readout | 1″ |
Accuracy | 2″ |
Telescope | |
Magnification | 30X |
Field of View | 1°30′ |
Minimum focusing Distance | 1.3m |
Reticle illumination | 5 brightness levels |
Compensator | |
System | Liquid tilt sensor/Dual-axis |
Working Range | ±3′ |
Accuracy | 1″ |
Distance Measurement (with Reflector) | |
Single Prism (Under general/good conditions) |
5000m |
Reflective Sheet | 800m |
Accuracy | 2mm+2ppm |
Measuring Time (Fine/Tracking) | 1s/0.5s |
Distance Measurement (Reflectorless) | |
Reflectorless Range (Calculated by Kodak Gray Card white side with 90% reflective) |
600m |
Accuracy | 3mm+2ppm |
Measuring Time | 1.5s |
Communication | |
Internal Data Memory | Approx. 20,000 points |
External Data Memory | Plug-in memory device: USB flash memory (max. 8GB) Plug-in memory device: SD memory card (max. 8GB) |
Interface | Serial RS-232, Mini-B |
Data Format | ASCII |
Operation | |
System | Real-time Operating System |
Display | High resolution back-light black and white display with contrast adjustment Graphics 192×96 pixels |
Control Panel | 2 Sides Alphanumeric backlight crystal keyboard |
Laser Plummet | |
Type | Laser point, 4 brightness levels adjustment |
Centering Accuracy | 1mm at 1.5m instrument height |
Environmental | |
Operating temperature | -4ºF to +122ºF (-20ºC to +50ºC) |
Storage temperature | -40ºF to +158ºF (-40ºC to +70ºC) |
Temperature & Pressure | Manual Input |
Dust & Water Proof (IEC60529 Standard) | IP55 |
Power Supply | |
Battery Type | Li-ion rechargeable battery |
Voltage/Capacity | ZBA400: 7.4V(DC)/3000mAh |
Operating Time with ZBA400 | Optimal 16 Hours (Continuous angle measurement every 30 seconds)/10 Hours Typical |
Measuring Times | Approx 12000 times |
The Prexiso T.O.2 digital electronic theodolite is designed for enhanced reliability in construction applications. Its advanced features let contractors work faster and longer, improving productivity and increasing profitability.
With vertical compensation and 2 accuracy the Prexiso T.O. 2 provides you with the precision required for your most demanding jobs for an affordable price without adding complexity. Various display modes, hold and set zero for horizontal angle, a variation of measurement units, simple distance measurement via stadia lines combined with six function keys guarantee easy use. The visible laser plummet enables you to set up over a point faster and easier than ever. The Prexiso TO 2 Digital Theodolite is the tool of your choice when it comes to checking angles, alignments, grade work and short range levelling.
Easy-to-read & easy-to-use
Audible right-angle notification
Rugged IP54 protection
Model | Prexiso T.O.2 |
---|---|
Precision | 2” |
Display resolution | 1” or 5” |
Display units | DEG (360° 00’ 00”), GON (400), MIL (6400), V / % |
Telescope | |
Magnification | 30x |
Objective aperture | 45 mm (1.7 in) |
Minimum focusing distance | 1.35 m (4.43 ft) |
Stadia multiplication factor/constant | 100/0 |
Compensator | |
System | Automatic vertical compensator, User set On/Off |
Working Range | ± 3’ |
Operation | |
Display | Double side large character back-lit LCD |
Keys | 6 one touch button functions |
Laser plummet | |
Type | Visible laser point |
Accuracy | 1.5 mm at 1.5 m instrument height |
Environmental conditions | |
Protection to dust and water | dust and water resistant |
Weight | |
Weight including battery and tribrach | 4.5 kg (9.9 lb) |
Battery/Power management | |
Type of battery | Rechargeable NiMH, replacement alkaline battery pack |
Operation period without laser plummet | 36 h |
The Bosch DGT-10 features 5 angular accuracy with a vertical tilt sensor that compensates telescope transiting to allow for instrument set up accuracy.
When Projecting a line or plumbing columns or walls, the Bosch DGT 10 will state to user the actual variance in true plumb and allow user to accurately and quickly turn the instrument back to a plumb position.
instrument set up accuracy.
When Projecting a line or plumbing columns or walls, the Bosch DGT 10 will state to user the actual variance in true plumb and allow user to accurately and quickly turn the instrument back to a plumb position.
The CST/berger DGT 10 features dual digital displays and a simple 6-key user interface that makes using the instrument very simple and easy.
The Bosch DGT-10 inclused an optical plummet that allows the user to align instrument directly over a reference point without having to use the old plumbob method.The telescope is 30X and the minimum focus is 53.
The DGT10 also features a 1:100 stadia ratio that allows operators to quickly estimate distances in the field.Working range is approximately 450 in radius.
Features of Bosch DGT-10 Digital Electronic TheodoliteAdditional Information:
Packaging Details : Survey Instruments Supplier
We deals in all Branded surveying instruments & accessories
Branded:TOPCON LEICA SOKKIA BOSCH GARMIN DGPS, TOTAL STATION, DIGITAL THEODOLITE, AUTO LEVEL, DISTANCE METER, GPS
pradeep@asiinstrumentsindia.com, omsouth@yahoo.com
Mobile:+91-9015653093;011-47014143
Alignment work made easy Leica Geosystems offers Industrial & Construction Theodolites with outstanding performance and maximum flexibility.
Leica Builder 100 Series Construction TheodolitesThe era of purely mechanical or optical instruments is over. This is the era where digital instruments are needed to remain competitive. The easy-to-use Leica Builder-106 leads the way and sets an industrys benchmark.
For anybody working on or around a site with the need of a simple, intuitive, yet innovative, long-lasting and powerful measuring tool.
With the Leica Builder-106, Leica Geosystems has designed a perfectly tailored tool for every construction job. Regardless of your profession, the Builder will amazingly accelerate your work flow. From simple tasks to professional all-day use, the Builder Series offers a scalable product family that exactly meets your needs.
Leica Builder 100 if you need to trust angles and alignmentsWith a laser plummet for simple and fast setup over control line, dual axis compensation for accurate plumbing, endless drives eliminating steps, audible notice for 90 turns, graphical leveling aid for fast and convenient setup and IP55 rating, the Leica Builder 100 is an outstanding theodolite.
Leica Builder-106 Set Digital Survey Theodolite Technical Specs:
Builder Specifications | Leica Builder 100 | Leica Builder 200 | Leica Builder 300 | Leica Builder 400 | Leica Builder 500 |
Full Power Site Software | ✓ | ||||
Wireless Communication | ✓ | ||||
Prism Measurement Mode | ✓ | ✓ | |||
Full alphanumeric keyboard | ✓ | ✓ | |||
Volumes Calculation | ✓ | ✓ | ✓ | ||
Data Im/Export to USB Stick | ✓ | ✓ | ✓ | ||
PC/Handheld Interface | ✓ | ✓ | ✓ | ✓ | |
Laser Distance Measure | ✓ | ✓ | ✓ | ✓ | |
Control Line Setup | ✓ | ✓ | ✓ | ✓ | |
3 Languages | ✓ | ✓ | ✓ | ✓ | ✓ |
Leveling Aid | ✓ | ✓ | ✓ | ✓ | ✓ |
Dual Axis Compensator | ✓ | ✓ | ✓ | ✓ | ✓ |
Laser Plummet | ✓ | ✓ | ✓ | ✓ | ✓ |
Li-Ion Batteries | ✓ | ✓ | ✓ | ✓ | ✓ |
Internal Memory [points] | – | – | 15’000 | 50’000 | 50’000 |
Angular Accuracy | 9”, 6” | 9”, 6” | 9”, 6” | 9”, 5” | 9”, 5”, 3” |
Distance without reflector (90% reflective) | – | 80 m | 120 m | 15 m | 250 m |
Distance to reflective tape (60mm x 60mm) | – | 250 m | 250 m | 15 m | 250 m |
Distance to glass prism | – | – | – | 500 (3500) m | 500 (3500) m |