Voltriqs tech Solution

Odhav, Ahmedabad, Gujarat

We offer the following services:

• Maintenance and service contracts
• Complete system design, installation and commissioning
• Calibration

Voltriqs have Horizontal & Vertical both LAF , We can customize as per your needs , also we make RLAF .

Our LAF Useful where any hyper critical work has to be performed withing minimum contation.

Complete Unit made of mildsteel with finished by powder coating working table made of

S.S. HEPA (High Efficiency particular Air) filter having efficency of 99.997% down on 0.3%Microns. per filter 90% down to 5 mi-crons U.V. tube light, S.cock for gas-vacuum or air, static pressure manometer etc. Supplied with BLOWER with motor hang by heavy

SPRING LOADED for minimum vibration & noise.

Size

• 30 X 30 CMS. HT
• 30 X 50 CMS. HT
• 30 X 70 CMS. HT

S.S. Gate Digital Model Hot Air Oven

Voltriqss AQMS measure below Parameter

• PM ( PM1, 2.5, 4, 10)
• Temp.
• Humidity
• Air Velocity
• Weather Monitoring
• CO, CO2, TVOC

• VACUUM OVEN (Rectangular) : Inside chamber made of S.S. (304) Outside Mild Steel with Toughened Glass Door. It is provided with 1 or 2 No. of S.S. trays.
• Temp. Range Ambient Temp. +5C to 130C.
• Temp. Controlled by Digital Temp. Controller / Microprocessor Based PID Controller.

WORKING SIZE   -WATTS  

(Round Dia x Depth)

• 12” x 12” x 12”   -  500
• 18” x 18” x 18” -  750
• 18” x 18” x 24” - 1000

• PID or program temperature control controller, , with over-temperature alarm system.
• Double doors ensure that use is convenient.
• Forced Air System, with Low-noise fan, Centrifugal cycle mothod, high tempearture uniformity.

• Horizontal air circularly by double Air ducts, high efficiency and high Uniformity.
• PID controller, with over-temperature protection function.
• With fan switch, LED digital display, high temperature blast motor.
• New anti-hot handle

Fabricated out of thick Mild Steel Sheet these are designed so as to throw out toxic/harmful vapours, thus protecting costly instruments & the person working in the lab. The outer surface is finished with powder coated & inner surface is epoxy painted.

The working table top is fitted with acid/alkali resistant tiles/S.S & a small wash basin with connections provided for inlet & outlet of water. The front door moves vertically up & down with concealed counterbalanced weight. The unit is fitted with fluorescent light & a gas cock of gas/air supply. The space under the work station can be provided with storage compartments for storage purpose. The front-facing panel is fitted with 15/5 amp socket with switches for exhaust system & fluorescent light to work on 220/230 volts AC Supply.

HIGH TEMPERATURE FURNACE – Outer Body Double Walled M.S. reinforced with iron angles duly Powder Coated Heating is done by Silicon carbide rods Max. Working Temp.     up to 1450°C

MAXIMUM FURNACE TEMP. UP-TO – 1150 WORKING TEMP. 1100°

WORKING SIZE - WATTS.

• 9″ X 4″ X 4″ - 2000
• 10″ X 5″ X 5″ -  2500
• 12″ X 6″ X 6″  - 3500
• 12″ X 8″ X 8″ - 5000
• 18″ X 9″ X 9″ - 6000

WORKING SIZE 

• 4” x 4” x 9” (100 x 100 x 225 mm)
• 5” x 5” x 10” (125 x 125 x 250 mm)
• 6” x 6” x 12” (150 x 150 x 300 mm)
• 8” x 8” x 12” (200 x 200 x 300 mm)
• 9” x 9” x 12” (225 x 225 x 300 mm)
• 9” x 9” x 18” (225 x 225 x 450 mm)

OPTIONAL

• Microprocessor Based PID Controller OR Programmable Controller with ramp and soak facility
• Thyristor system (Single Phase)
• Thyristor system (Three Phase)

Voltriqs Make Various Types of Hot Air Oven

Laboratory Type Inside M.s Chamber Outer M.s Powder Coated with Thermostatic & Three Heat Controlled Switch. Working Temperature Up to 250°c with & Without Digital Temp. Controller

WORKING SIZE           WATTS           NO. OF SLEEVES

• 12″ X 12″ X 12″             1000    1
• 14″ X 14″ X 14″             1000    2
• 18″ X 18″ X 18″             1500    2
• 18″ X 18″ X 24″             1800    3
• 24″ X 24″ X 24″             2000    3
• 24″ X 24″ X 36″             2500    3
• 28″ X 28″ X 28″             3000    3
• 32″ X 32″ X 32″             3600    3

Hot Air Oven : Memmert Type Inside M.s Chamber Outer M.s Powder Coated with Thermostatic & Three Heat Controlled Switch.working Temperature Up to 250°c

WORKING SIZE     WATTS         NO. OF SLEEVES

• 12″ X 12″ X 12″       1200      1
• 14″ X 14″ X 14″       1200      2
• 18″ X 18″ X 18″       1800      2
• 18″ X 18″ X 24″       2250      3
• 24″ X 24″ X 24″       2400      3
• 24″ X 24″ X 36″       3000      3

Hot Air Oven : Laboratory Type Inside S.s Chamber (s.s. 304 Grade) Outer M.s Powder Coated with Thermostatic & Three Heat Controlled Switch. Working Temperature Up to 250°c

WORKING SIZE     WATTS        NO. OF SLEEVES

• 12″ X 12″ X 12″        1000     1
• 14″ X 14″ X 14″        1000     2
• 18″ X 18″ X 18″        1500     2
• 18″ X 18″ X 24″        1800     3
• 24″ X 24″ X 24″        2000     3
• 24″ X 24″ X 36″        2500      3

Hot Air Oven : Memmert Type Inside S.s Chamber (s.s. 304 Grade)  Outer M.s Powder Coated with Thermostatic & Three Heat Controlled Switch. Working Temperature Up to 250°c

WORKING SIZE    WATTS        NO. OF SLEEVES

• 12″ X 12″ X 12″       1200     1
• 14″ X 14″ X 14″       1200     2
• 18″ X 18″ X 18″       1800     2
• 18″ X 18″ X 24″       2250     3
• 24″ X 24″ X 24″       2400     3
• 24″ X 24″ X 36″       3000     3

Hot Air Oven : Laboratory Type Inside S.s-316 Chamber Outer S.s. 304 Grade with Thermostatic & Three Heat Controlled Switch

(gmp Model). Working Temperature Up to 250°c

WORKING SIZE    WATTS         NO. OF SLEEVES.

• 12″ X 12″ X 12″     1000     1
• 14″ X 14″ X 14″     1000     2
• 18″ X 18″ X 18″     1500     2
• 18″ X 18″ X 24″     1800     3
• 24″ X 24″ X 24″     2000     3
• 24″ X 24″ X 36″     2500      3

Hot Air Oven : Memmert Type Inside S.s-316 Chamber Outer S.s. 304 Grade with Thermostatic & Three Heat Controlled Switch

(gmp Model). Working Temperature Up to 250°c

WORKING SIZE     WATTS         NO. OF SLEEVES.

• 12″ X 12″ X 12″      1200     1
• 14″ X 14″ X 14″      1200     2
• 18″ X 18″ X 18″      1800     2
• 18″ X 18″ X 24″      2250     3
• 24″ X 24″ X 24″      2400     3
• 24″ X 24″ X 36″      3000     3

Benefits of Fire and Smoke Measurement Control System:

• Early fire detection
• Decreased risk of fire damage
• Low Maintenance
• 24/7 monitoring

The Edge personal noise dosimeter series offers users a compact, 3-ounce (85 grams) unit that mounts easily to the shoulder. Its large display with easy-to-use interface provides crucial information at a glance.

• LED indicator can be programmed to flash when dose level has been exceeded
• Easy-to-read design enables workers to monitor their own noise exposure. If desired, unit can be set to inhibit display, for easier testing and verification
• Infrared communication port to EdgeDock provides quick USB connection to 3M™ Detection Management Software

Features:

• Compact, 3-ounce (85 grams) unit mounts easily to the shoulder Intuitive.
• Large display with easy-to-use interface provides crucial information at a glance
• Edge 5 model offers three independent dosimeters that can simultaneously measure against separate industry standards, all in one compact unit  certified
• MSHA, SIRA (ATEX), CSA (US/Canada) and Simtars (IECEx) Intrinsic Safety Approvals

Ideal for:

Direct immersion of samples for shaking in the field of biotechnology and laboratories, hybridization applications, cell cultures, cell aeration, increasing solubility rates, molecular biology assays and bacterial vultures

Features:

• Stainless steel interior and bath, powder-coated steel body, double painted & baked body, 20 mm polyurethane-insulation
• high-performance shaking engine ensures best smoothly shaking motion, minimum noise and vibration
• universal stainless steel spring rack included: for various kind of flasks and tubes (up to 2l), easy to disassemble
• users self-compensation function to control difference between real temperature and indicated temperature (10.0C)
• drain valve mounted
• backlight LCD display
• CE certified and unique serial number for tracing

Safety mechanism:

• overheat and over-current protection
• sensor error detection

Controller:

• Jog-Dial controller (turn + push)
• digital feedback controller for precise speed control
• digital fuzzy controller for precise temperature control

OIL SEALED ROTARY HIGH VACUUM PUMP :

• “Voltriqs” High Vacuum Pumps / Laboratory Vacuum Pumps : These are of oil-immersed, rotary vane type pumps.
• The rotor, with two spring loaded vanes, is mounted eccentric in the stator body. As the rotor, rotates the vanes sweep the crescent shape air space twice in each revolution.
• There is in-build non-returned valve which prevents back flow of air. Manufactured from graded material, all moving parts are precisely machined, ground and assembled with close tolerances.
• This results in increased efficiency and long trouble free operating life.

APPLICATIONS :

• H Distillation H Dehydration and filtration processes H Exhausting Electronic Tubes-
• GLS Lamps-Mercury Vapour Lamp and Tubes H Vacuum metallurgy – Vacuum Sublimation – Vacuum
• impregnation – Thin film coating H Refrigerator and Air conditional servicing H Freeze drying of loads

RANGES :

• H Max. Capacity : 50 LPM to 10000 LPM (3.06 M3/hr to 600 M3/hr)
• H Max. Vacuum : Single Stage : 0.05 mm fo Hg., Two Stage : 0.005 mm of Hg.
• H Recommend Motor : 0.25 HP to 10 HP, 1450 RPM
• H Recommend Oil : Enklo-68, 46, 100

UV/VISIBLE 4 nm spectrophotometer. 3 YEARS WARRANTY. Delivered with 10 mm cell holder (xenon flash lamp), user manual and performance certificate.