Current Transformers are made in a range of measuring and protection type considering quality, accuracy and reliability as prime factors. MARSZ Current Transformers can be used for metric and imperial size bars. Current Transformers are made from high magnetic performance prime CRGO Silicon Electrical Steel. The performance of the core is checked to meet final parameters such as ratio, rating and accuracy.

The Current Transformer is finally completed by placing PVC washers on top and bottom and then taped closely with polyester film and polyvinyl chloride tape. Proper lugs are provided on secondary terminals with S1 and S2 markings. Anodized name plate is slipped within outer tape mentioning specifications and P1, P2 direction.

In addition to the above we can offer Current Transformers to your requirement with various combinations of

• Ratios
• Burden
• Accuracy Class
• Type
• *Subject to technical feasibility.

Applications:

• Suitable for Ammeters.
• Power Factor meters and Protective Relays.

Suggested Burden Guide:

• Moving Iron Ammeters 1.5 VA to 5 VA
• Recording Ammeters 2 VA to 10 VA
• Recording Thermal Demand Wattmeters 0.7 VA to 1.4 VA
• KWH Meters 0.3 VA to 0.6 VA
• Thermal Demand Ammeters3 VA
• Thermal Maximum Demand Ammeters 4 VA to 8 VA
• Cable 7/029 5 Amp Secondary 0.05 VA/ft
• Cable 7/029 1 Amp Secondary 0.002 VA/ft

Distribution Transformer Trader

A distribution transformer works for the electrical distribution system to cut down the high voltage directly from the transmission system. It is aimed at maintaining the voltage levels and making them suitable for the right distribution to homes, businesses, and sectors. Such products play a significant role in the final stages of the electrical power distribution network.

Do you wish to buy a distribution transformer available at the best quality? Yes. We at Marsz Electricals Pvt. Ltd. are a renowned distribution transformer trader, manufacturer, and supplier based in India, supplying them to renowned countries such as Australia, the U.K., New Zealand, Italy, Germany, East Africa, South Africa, the Middle East, and the Far East.

The distribution transformers we deal with are made with the utmost attention to meet universal standards. Our clients are willing to buy the products because they are of amazing quality, highly efficient, use less power, and have a long service life.

Features of the Distribution Transformer

• Made with robust construction and is highly efficient.
• The surface finishing is powder-coated to give better results.
• Available in two phases: single-phase or three phase
• Made for work in maximum temperature rise at full rated load, 4050 C for aluminium wounds and 4555 C for copper wound transformation.

At the same time, Marsz Electricals Pvt. Ltd. delivers the products with special technical features. If you wish to make some changes, customised orders are also accepted with us. Our product range is so efficient that it can save power. Our team is focused on satisfying the needs of different firms as a service provider of electrical transformers and maintenance services for transformers.

If you wish to collect more information about the product and delivery, you can contact our team. After-sale help is also available with us.

A range of high quality toroidal transformers with twin 115VAC. primary windings and a wide choice of secondary voltages.

The primary windings can be connected in series or parallel to cater for 115V or 230V 50/60Hz AC inputs. All leads for both primary and secondary are double-insulated enameled wire with stripped wire ends thereby reducing assembly time.There are no air gaps in the core & no vibrating laminations. The reluctance is low, resulting in very low magnetizing currents with savings in power consumption. A further benefit of this gapless core is the reduced level of radiated electrical noise (hum field).

The simple construction of the toroid and the resultant saving in weight as compared to the conventional laminated transformers makes this range particularly attractive for compact power supplies and slimline equipment. Weight of conventional laminated transformer of 1 KVA is approx.12 kg. whereas weight of TOROPOWER toroidal transformer is approx.7 kg.

"VARIVOLT" AUTO TRANSFORMER is a continuously variable voltage auto transformer, having a movable carbon tip, fixed to brush arm sliding on a silver plated commutator. Rotation of the brush arm by either manual or motor drive, delivers an output voltage from zero or above line voltage. "VARIVOLT" confirms to I.S. 5142

Current Transformers are made in a range of measuring and protection type considering quality, accuracy and reliability as prime factors. MARSZ Current Transformers can be used for metric and imperial size bars. Current Transformers are made from high magnetic performance prime CRGO Silicon Electrical Steel. The performance of the core is checked to meet final parameters such as ratio, rating and accuracy.

The Current Transformer is finally completed by placing PVC washers on top and bottom and then taped closely with polyester film and polyvinyl chloride tape. Proper lugs are provided on secondary terminals with S1 and S2 markings. Anodized name plate is slipped within outer tape mentioning specifications and P1, P2 direction.

In addition to the above we can offer Current Transformers to your requirement with various combinations of

• Ratios
• Burden
• Accuracy Class
• Type
• *Subject to technical feasibility.

Applications:

• Suitable for Ammeters.
• Power Factor meters and Protective Relays.

Suggested Burden Guide:

• Moving Iron Ammeters 1.5 VA to 5 VA
• Recording Ammeters 2 VA to 10 VA
• Recording Thermal Demand Wattmeters 0.7 VA to 1.4 VA
• KWH Meters 0.3 VA to 0.6 VA
• Thermal Demand Ammeters3 VA
• Thermal Maximum Demand Ammeters 4 VA to 8 VA
• Cable 7/029 5 Amp Secondary 0.05 VA/ft
• Cable 7/029 1 Amp Secondary 0.002 VA/ft

Distribution Transformer Trader

A distribution transformer works for the electrical distribution system to cut down the high voltage directly from the transmission system. It is aimed at maintaining the voltage levels and making them suitable for the right distribution to homes, businesses, and sectors. Such products play a significant role in the final stages of the electrical power distribution network.

Do you wish to buy a distribution transformer available at the best quality? Yes. We at Marsz Electricals Pvt. Ltd. are a renowned distribution transformer trader, manufacturer, and supplier based in India, supplying them to renowned countries such as Australia, the U.K., New Zealand, Italy, Germany, East Africa, South Africa, the Middle East, and the Far East.

The distribution transformers we deal with are made with the utmost attention to meet universal standards. Our clients are willing to buy the products because they are of amazing quality, highly efficient, use less power, and have a long service life.

Features of the Distribution Transformer

• Made with robust construction and is highly efficient.
• The surface finishing is powder-coated to give better results.
• Available in two phases: single-phase or three phase
• Made for work in maximum temperature rise at full rated load, 4050 C for aluminium wounds and 4555 C for copper wound transformation.

At the same time, Marsz Electricals Pvt. Ltd. delivers the products with special technical features. If you wish to make some changes, customised orders are also accepted with us. Our product range is so efficient that it can save power. Our team is focused on satisfying the needs of different firms as a service provider of electrical transformers and maintenance services for transformers.

If you wish to collect more information about the product and delivery, you can contact our team. After-sale help is also available with us.

A range of high quality toroidal transformers with twin 115VAC. primary windings and a wide choice of secondary voltages.

The primary windings can be connected in series or parallel to cater for 115V or 230V 50/60Hz AC inputs. All leads for both primary and secondary are double-insulated enameled wire with stripped wire ends thereby reducing assembly time.There are no air gaps in the core & no vibrating laminations. The reluctance is low, resulting in very low magnetizing currents with savings in power consumption. A further benefit of this gapless core is the reduced level of radiated electrical noise (hum field).

The simple construction of the toroid and the resultant saving in weight as compared to the conventional laminated transformers makes this range particularly attractive for compact power supplies and slimline equipment. Weight of conventional laminated transformer of 1 KVA is approx.12 kg. whereas weight of TOROPOWER toroidal transformer is approx.7 kg.

"VARIVOLT" AUTO TRANSFORMER is a continuously variable voltage auto transformer, having a movable carbon tip, fixed to brush arm sliding on a silver plated commutator. Rotation of the brush arm by either manual or motor drive, delivers an output voltage from zero or above line voltage. "VARIVOLT" confirms to I.S. 5142