Our Products
Pumps, Pumping Machines & Parts
2 Products availableExhaust Systems
2 Products availableCoupling
2 Products availableInstrumentation & Control Equipment
1 Products availableHydraulic & Pneumatic Tools
1 Products availableFilters
1 Products availableOur product range contains a wide range of WALVOIL Diverter Valves, Directional Control Valves, Hydraulic Spool Valve, Stainless Steel Check Valves and Hydraulically Operated Direction Control Valve
These products are complementary to the directional control valves when a sequence of operations, safety operations and / or an actuator selection are needed.
Nominal flow | Operating pressure | Nr. of way | Standard threads | ||
(static working conditions) | (static working conditions) | BSP | UN-UNF | ||
Type | (l/min - US gpm) | (bar - psi) | ISO 228/1 | ISO 11926–1 | |
Mechanical rotary spool control Δ | |||||
DH5 | 60 - 16 | 315 - 4600 | 3/4/6/8 | G 3/8 | SAE 8 |
DH10 | 90 - 24 | 315 - 4600 | 3/4/6/8 | G 1/2 | SAE 10 |
DH20 | 140 - 37 | 315 - 4600 | 3/4/6/8 | G 3/4 | SAE 12 |
DH25 | 200 - 53 | 250 - 3600 | 3/4/6/8 | G 1 | SAE 16 |
DH30 | 280 - 74 | 210 - 3050 | 3/6 | G 1 1/2 | SAE 24 |
Mechanical spool control | |||||
DF5 | 60 - 16 | 315 - 4600 | 2/3/6 | G 3/8 | SAE 8 |
DF10 | 90 - 24 | 315 - 4600 | 2/3/6 | G 1/2 | SAE 10 |
DF20 | 140 - 37 | 315 - 4600 | 2/3/6 | G 3/4 | SAE 12 |
DF25 | 280 - 74 | 315 - 4600 | 3 | G 1 | SAE 16 |
Solenoid operated monoblock type | |||||
DFE052 | 60 - 16 | 200/315* - 2900/4600* | 2/3/6/8 | G 3/8 | SAE 8 |
DFE10 | 90 - 24 | 200/315* - 2900/4600* | 3/6 | G 1/2 | SAE 10 |
DFE20 | 140 - 37 | 200/315* - 2900/4600* | 3/6 | G 3/4 | SAE 12 |
Solenoid operated sectional type | |||||
DFE080 | 25 - 6.6 | 200/315* - 2900/4600* | 6/8/10 | G 1/4 | SAE 4 |
DFE100 | 50 - 13 | 200/315* - 2900/4600* | 6/8/10 | G 3/8 | SAE 8 |
DFE140 | 80 - 21 | 200/315* - 2900/4600* | 6/8/10 | G 1/2 | SAE 10 |
Designed for front-loader application | |||||
DFE141 | 80 - 21 | 315 - 4600 | 6/8 | G 1/2 | |
DFE143 | 80 - 21 | 250 - 3600 | 6 | ||
DFE110 | 90 - 24 | 200/315* - 2900/4600* | 12 | G 1/2 | SAE 10 |
Designed for steering application | |||||
(New)DFE085 | 25 - 24 | 210 - 3050 | 4 | G 3/8 | SAE 8 |
Designed for joystick pattern selection | |||||
(New)DHV080 | 10 - 2.6 | 100 - 1450 | 8 | G 1/4 | SAE 4 |
Atos is a leading international manufacturer of oil-hydraulic solenoid valves. | ||||
Features : shell moulding casting machined by transfer lines and then cleaned by thermic deburring - interchangeable spool - wet solenoid with manual overide. Sealed and rugged execution with cushioning effect above cetop 05 size. | ||||
DHI, DKI-DIRECT OPERATED, DPHI-PILOT OPERATED
|
Model | DHI-0* | DKI-1* | DPHI-1* | DPHI-2* | DPHI-3* | DPHI-6* | |
Size | 06 | 10 | 10 | 16 | 25 | 32 | |
Nominal flow-1/min | 60 | 100 | 140 | 300 | 650 | 1000 | |
Pmax-bar | P.A.B port | 350 | 315 | 350 | 350 | 350 | 350 |
T port | 120 | 120 | 250 | 250 | 250 | 250 |
Sandwich Type, Spool valve used to prevent pressure peaks and acoustic unloading shocks in return line.
Directional Control Valve, Hydraulically Operated:Solenoid Pilot operated Directional Valves and Hydraulically operated.
Direct acting with guided cushioned poppet
Cartridge, Threaded and Subplate types
Sizes: NG 06, NG 10, NG 20
Qmax:: Upto 160lpm @1440 rpm
Pmax Set: Upto 700bar
Two stage spool type relief / reducing valve cartridges
Low pressure override
4 pressure range setting available
Available with option of Set Screw and Hand Knob
Seat Type
Free Flow from B to A
Leakproof closure from A to B upto determined pressure
Throttle cum check valve, Non Pressure Compensated type
sizes : NG 06, NG 10
Seat type valve with option of Piloting internally and externally
Threaded and Subplate mounting available
Double Pilot Operated Check Valve also available