VMC Instruments

Ambegaon, Pune, Maharashtra

Features

• Built-in printer
• RS232 interface
• High resolution and high brightness LCD display

Main accessories

• Coordinate anvil : 1 pc.
• Thin shaft anvil : 1 pc.
• Thin plate anvil : 1 pc
• Flat nose pliers : 1 pc
• .Large V-notch anvil : 1 pc.
• Small V-notch anvil : 1 pc.
• Diamond pyramid penetrator : 1 pc.
• Micro-Vickers standardized block : 2 pcs.

'VMC' Computerised Vickers Hardness Tester is a simple and accurate means to automatically measure the diamond indentation and give Vickers hardness number. The Computerised Vickers Hardness Tester are suitable for measuring the hardness of precision metallic parts with wide testing range - from soft to hard, and their accurate results are widely acclaimed. These tester strictly confirm to IS 1754 - 2002. The operation of the Computerised Vickers Hardness Tester is automatic with motorized loading/unloading. The weight selection is by a mechanical dial. Technical DataTotal Loads : 5, 10, 20, 30, 50, kgf (1Kg optional)Max. Test Height (mm) : 200Diagonal least count (mm)Diagonal measuring range (mm) : 0.001, 0.05 to 0.5Throat depth(mm) : 135Machine Dimension (Approx.)mm : L 585 x W 290 x H 860Weight (Approx.)mm : 70 kg.Power Supply : 220VAC, 50Hz, 1PhaseThe software includesOnline indentation setting and focusing on PC monitorFacility for Auto / Remote Auto / semi Auto / Manual modes of operationWell managed database saves readings W.R.T. batch and certificateReport generation in the form of certificate and graph with variation and histogramFacility for calibration and check of calibrationAdvance image processing algorithm implemented for automatic measurementStatistical data is provided for a batch results and include standard deviation, mean, medium, minimum and maximum readingMeasuring scale Calibration / Verification on PC monitorPC requirements2 gigahertz (GHz) or fasterprocessor1 gigabyte (GB) RAM minimumMicrosoft Windows 7/Vista/XP operating systemDisplay screen resolution minimum 1024 by 768 pixelsTwo free USB 2.0 portsAccessoriesStandard Test Block 1 No.Diamond indentor 1 No.Weights 1 SetFlat Anvil 1 No.Vee-type anvil ( Small & Big ) 1 No. eachSpanners 1 SetElectric Cord & PC interface cord 1 No. eachUSB Video Capture 1 No.Software CD 1 No.Instruction Manual 1 Book.

Computerised Brinell Hardness Tester is a simple and an accurate means to produce Brinell impression and automatically measure it. The Computerised Brinell Hardness Tester, which we offer, gives direct display of Brinell hardness number. These testers are suitable for measuring the hardness of metallic parts with wide leasting range - from soft to hard, and their accurate results are widely acclaimed. These Computerised Brinell Hardness Testers strictly confirm to IS : 2281-2005, BS : 10003-2 and ASTM E-10. Technical Data

• Total Load : 500 to 3000 in stages of 250 kgf
• Measurement Range : 1-6 mm
• Max. Test Height : 410 mm
• Scale least count : 0.01 mm
• Throat depth : 200 mm
• Machine Dimension (Approx.) : L 995 x W 400 x H 1178 mm
• Weight (Approx.) : 450 mm
• Power Supply : 415/50/3 V/Cy/Ph

The Software Includes

• Facility for Auto / semi Auto / Manual modes of operation.
• Well managed database saves readings w.r.t. batch and certificate.
• Report generation in the form of certificate and graph with variation and histogram.
• Facility for calibration and check of calibration.
• Advance image processing algorithm implemented for automatic measurement.
• Statistical data is provided for a batch results and include standard deviation, mean, medium, minimum and maximum reading.
• Measuring scale Calibration / Verification on PC monitor.

PC requirements

• gigahertz (GHz) or faster processor
• 1 gigabyte (GB) RAM minimum
• Microsoft Windows 7/8/Vista/XP operating system
• Display screen resolution minimum 1024 by 768 pixels
• Two free USB 2.0 ports

Standard Accessories

• Testing table 200 mm dia (1 Piece)
• Testing table 70 mm dia with "V" groove for bround jobs 10 to 80 mm dia. (1 Piece)
• Ball holder 5 mm (1 Piece)
• Ball Holder 10 mm (1 Piece)
• Test Block HB-5/750 (1 Piece)
• Test Block HB-10/3000 (1 Piece)
• Allen Spanner (4 Pieces)
• Telescopic Cover for elevating screw protection (1 Set)
• Electric Cord & PC interface cord (1 No. each)
• USB Video Capture (1 No.)
• Interface box (1 No.)
• Software CD (1 No.)
• Instruction manual (1 Book)

VMC' Computerized Brinell Hardness Tester is a simple and a accurate means to produce brinell impression and automatically measure it. It gives direct display of Brinell hardness number. These testers are suitable for measuring the hardness of metallic parts with wide leasting range - from soft to hard, and their accurate results are widely acclaimed. These testers strictly confirm to IS : 2281-2005, BS : 10003-2 and ASTM E-10 The system comprises specially developed image processing software for automatic measurement, Software is proven in industry and is being used since many years to get reliable and accurate readings in less than a second. Technical Data

• Total Load : 500 to 3000 in stages of 250 kgf
• Measurement Range : 1-6 mm
• Max. Test Height : 410 mm
• Scale least count : 0.01 mm
• Throat depth : 200 mm
• Machine Dimension (Approx.) : L 995 x W 400 x H 1178 mm
• Weight (Approx.) : 450 Kg
• Power Supply : 415/50/3 V/Cy/Ph

The Software Includes

• Facility for Auto / semi Auto / Manual modes of operation.
• Well managed database saves readings w.r.t. batch and certificate.
• Report generation in the form of certificate and graph with variation and histogram.
• Facility for calibration and check of calibration.
• Advance image processing algorithm implemented for automatic measurement.
• Statistical data is provided for a batch results and include standard deviation, mean, medium, minimum and maximum reading.
• Measuring scale Calibration / Verification on PC monitor.

PC requirements

• 2 gigahertz (GHz) or faster processor
• 1 gigabyte (GB) RAM minimum
• Microsoft Windows 7/8/Vista/XP operating system
• Display screen resolution minimum 1024 by 768 pixels
• Two free USB 2.0 ports

Standard Accessories

• Testing table 200 mm dia (1 Piece)
• Testing table 70 mm dia with "V" groove for round jobs 10 to 80 mm dia. (1 Piece)
• Ball holder 5 mm (1 Piece)
• Ball Holder 10 mm (1 Piece)
• Test Block HB-5/750 (1 Piece)
• Test Block HB-10/3000 (1 Piece)
• Allen Spanner (4 Pieces)
• Telescopic Cover for elevating screw protection (1 Set)
• Electric Cord & PC interface cord (1 No. each)
• USB Video Capture (1 No.)
• Interface box (1 No.)
• Software CD (1 No.)
• Instruction manual (1 Book)

VMC' Computerized Vickers Hardness Tester is a simple and accurate means to automatically measure the diamond indentation and give Vickers hardness number. These testers are suitable for measuring the hardness of precision metallic parts with wide testing range - from soft to hard, and their accurate results are widely acclaimed. These tester strictly confirm to IS 1754 - 2002. The operation is automatic with motorized loading/unloading. The weight selection is by mechanicaldial. The system comprises specially developed image processing software for automatic measurement, Software is proven in industry and is being used since many years to get reliable and accurate readings in less than a second. The system comprises specially developed image processing software for automatic measurement, Software is proven in industry and is being used since many years to get reliable and accurate readings in less than a second. The Software Includes

• Online indentation setting and focusing on PC monitor.
• Facility for Auto / Remote Auto / semi Auto / Manual modes of operation.
• Well managed database saves readings w.r.t. batch and certificate.
• Report generation in the form of certificate and graph with variation and histogram.
• Facility for calibration and check of calibration.
• Advance image processing algorithm implemented for automatic measurement.
• Statistical data is provided for a batch results and include standard deviation, mean, medium, minimum and maximum reading.
• Measuring scale Calibration / Verification on PC monitor.

PC Requirements

• 2 gigahertz (GHz) or faster processor
• 1 gigabyte (GB) RAM minimum
• Microsoft Windows 7/8/Vista/XP operating system
• Display screen resolution minimum 1024 by 768 pixels
• Two free USB 2.0 ports

Accessories

• Standard Test Block (1 No.)
• Diamond indenter (1 No.)
• Weights (1 Set)
• Flat Anvil (1 No.)
• Vee-type anvil (Small & Big) (1 No. each)
• Spanners (1 Set)
• Electric Cord & PC interface cord (1 No. each)
• USB Video Capture (1 No.)
• Software CD (1 No.)
• Instruction Manual (1 Book)

'VMC' Computerised Brinell Hardness Tester is a simple and accurate means to produce brinell impression and automatically measure it. The Computerised Brinell Hardness Tester gives direct display of Brinell hardness number. These Computerised Brinell Hardness Testers are suitable for measuring the hardness of metallic parts in a wide range - from soft to hard, and their accurate results are widely acclaimed. The Computerised Brinell Hardness Testers, we offer strictly confirm to IS: 2281, BS: 10003-2 and ASTM E-10. Technical DataTotal Load kgf : 500 to 3000 in stages of 250 kgfMeasurement Range : 1-6 mmMax. Test Height : 410 mmScale least count : 0.01 mmThroat depth : 200 mmMachine Dimension (Approx.) mm : L 995 x W 400 x H 1178Weight (Approx.) : 450Power Supply V/Cy/Ph : 415/50/3The software includesFacility for Auto / semi Auto / Manual modes of operation Well managed database saves readings w.r.t. batch and certificateReport generation in the form of certificate and graph with variation and histogramFacility for calibration and check of calibrationAdvance image processing algorithm implemented for automatic measurementStatistical data is provided for a batch results and include standard deviation, mean, medium, minimum and maximum readingMeasuring scale Calibration / Verification on PC monitor.

Digital Hardness Tester for Rockwell Tests has motorized automatic cycle operation, i.e. load/dwell/unload. The Preliminary Test Force is 98.07N (10kgf). Total Test Force is 588.4, 980.7, 1471N (60, 100, 150 kgf). Test Force Selection is by external mechanical dial. The system has bar indication on display for Preload. User can set Preload Dwell time, Dwell time for Total Load and Elastic recovery Dwell. The operation is easy with keyboard entry through reliable membrane switches for scale/HI-GO-LO/Dwell time selection. The scale display is with 0.1 Rockwell Resolution. The system has real time measurement and indication with Digital Dial Indicator of 1 micron resolution. The machine has feature of data export to PC or serial printer. It gives results indicating serial, number of tests, hardness scale, hardness value and high / good / low indication w.r.t limits entered. The Digital Rockwell Hardness Tester (VMCRASNE) covers Rockwell scale A, B, C, D, E, F, G, H, K, L, M, P, R, S, V and confirms IS : 1586, BS EN ISO 6508-1:2005 & ASTM E-18. The Digital Rockwell Superficial Hardness Tester (VMCRSNE) includes all Rockwell scales and 15T, 30T, 45T, 15N, 30N, 45N, 15W, 30W, 45W, 15X, 30X, 45X, 15Y, 30Y, 45Y and confirms IS : 1586, BS EN ISO 6508-1:2005& ASTM E-18. Options Available

• External serial thermal printer to print reports
• PC software : To interface machine in PC Export mode

Our dedicated staff and quality auditors take care of the complete manufacturing of the products, even the raw material sourced at the initial stages are checked on the grounds of quality. We provide customized packaging solutions, as we understand each customer is unique. The packaging we provide is strong, non-toxic, and capable of braving shipping and handling.