Our Products
Pressure Switches
2 Products availableRotameters
1 Products availableManometers
1 Products availableMeasuring Instruments & Equipment
1 Products availableThe exclusive range of Tube Manometers is inclusive of Glass Tube Manometer, Inklined Tube Manometer and U-Tube Manometer. We are one of the reputed Manufacturers and Suppliers of Tube Manometers in Maharashtra, India. The Tube Manometers, offered by us are fabricated from a thick acrylic solid block. It is compact in design and accurate in dimensions offering superb performance. We make sure that the desired order of the Manometers is delivered on time.
Get in touch with us and acquire (Adjustable Differential Pressure Switch MAD Series). The Adjustable Differential Pressure Switch that we offer is sturdy in construction and assures longer functional life. Place the order quickly to come to know!
More about Adjustable Differential Pressure Switch (MAD Series) : MAD Series Pressure Switches are housed in Pressure Die cast aluminum powder coated enclosure & are recommended for Panel / line mounting or outdoor service.
Features
Note : Equivalent or B4 Series of Indfos, GM Series of Switzer & Z series of Waaree
Applications
Technical Specification
Enclosure | Aluminum Die Cast Weather Proof to IP-66 |
---|---|
Sensing Element | Diaphragm Sealed ( up to 32 bar ) |
Wetted parts | S S 304 / S S 316 |
Repeatability | ± 1 % of Full Span |
Scale Accuracy | ± 5 % of Full Span |
Micro Switch | 1 SPDT Snap Action |
Switch Rating | 15 A, 250 V AC or 0.4 A, 110 V DC / Varies based on selection of Micro Switch |
Range | Refer Standard Range Table |
Set point | Between 20 to 80% for better performance |
Over Protection | 150 % of Full Span |
Differential | Adjustable |
Mounting | Bottom / Panel |
Process connection | ¼” NPT (F) |
Set Point adjustment | External with Locking system |
Cable entry | PG 13.5mm Standard / DIN Connector or Other optional |
Maximum Process Temperature | 150° C / 300° F |
Conformity | BS 6134 Standard |
High voltage strength | 0.5 to 0.6 KV between open contact 2 KV between contact & Body. |
Insulation resistance | > 10 M ohms at 500 V |
Process Media | Air, water, Oil etc |
Standard Ranges & Dead Band Chart For MAD Series Pressure Switch
Sr. No. | Ranges | Adjustable Dead Band in BAR | |
Minimum | Maximum | ||
1 | -1 to 0 bar ( Vacuum ) | 0.1 | 0.5 |
2 | 0.1 to 1 bar | 0.1 | 0.3 |
3 | 0.2 to 2 bar | 0.11 | 0.8 |
4 | 0.2 to 4 bar | 0.23 | 1.4 |
5 | 0.4 to 6 bar | 0.25 | 1.6 |
6 | 0.5 to 10 bar | 0.4 | 3 |
7 | 1 to 16 bar | 1 | 6 |
8 | 2 to 25 bar | 1 | 6 |
9 | 2 to 32 bar | 1.5 | 6.5 |
Get in touch with us and purchase the finest quality Adjustable Differential Pressure Switch (MFD Series). It is sturdy, it is efficient and moreover, it is competitively priced. Order retail or bulk, timely deliveries are guaranteed.
More about Adjustable Differential Pressure Switch (MFD Series) : MFD Series Pressure Switches are housed in Pressure Die cast aluminum powder coated enclosure & are recommended for Panel / line mounting or outdoor service.
Features
Note : Equivalent or B4 Series of Indfos, GM Series of Switzer & Z series of Waaree
Application
Technical Specification
Enclosure | Aluminum Die Cast Weather Proof to IP-66 |
---|---|
Sensing Element | Diaphragm Sealed ( up to 40 bar ) / Piston type above 60 bar |
Wetted parts | S S 304 / S S 316 |
Repeatability | ± 1 % of Full Span |
Scale Accuracy | ± 3 % of Full Span |
Micro Switch | 1 SPDT Snap Action or 2 SPDT on request |
Switch Rating | 15 A, 250 V AC or 0.2 A, 220 V DC / Varies based on selection of Micro Switch |
Range | Refer Standard Range Table |
Set point | Between 20 to 80% for better performance |
Over Protection | 150 % of Full Span |
Differential | Fixed |
Mounting | Bottom / Panel |
Process connection | ¼” NPT (F) |
Set Point adjustment | External with Locking system |
Cable entry | PG 13.5mm Standard / DIN Connector or Other optional |
Maximum Process Temperature | 150° C / 300° F |
Conformity | BS 6134 Standard |
High voltage strength | 0.5 to 0.6 KV between open contact 2 KV between contact & Body. |
Insulation resistance | > 10 M ohms at 500 V |
Process Media | Air, water, Oil etc |
Standard Ranges & Dead Band Chart For MFD Series Pressure Switch
Sr. No. | Ranges | Dead Band in BAR ( Switching Difference ) | |
GPL | GPH | ||
1 | -1 to 0 bar ( Vacuum ) | 0.06 | 0.08 |
2 | 0.1 to 1 bar | 0.08 | 0.09 |
3 | 0.2 to 2 bar | 0.08 | 0.16 |
4 | 0.2 to 2.5 bar | 0.08 | 0.16 |
5 | 0.2 to 4 bar | 0.14 | 0.18 |
6 | 0.4 to 6 bar | 0.15 | 0.25 |
7 | 0.5 to 10 bar | 0.3 | 0.05 |
8 | 1 to 16 bar | 0.5 | 0.9 |
9 | 2 to 25 bar | 1 | 2 |
10 | 2 to 25 bar | 1.2 | 2.1 |
11 | 2 to 40 bar | 1.6 | 2.5 |
12 | 5 to 60 bar | 2.5 | 8.5 |
13 | 10 to 100 bar | 4 | 9 |
14 | 10 to 160 bar | 8 | 12.5 |
15 | 10 to 250 bar | 9 | 13.5 |
16 | 40 to 400 bar | 14 | 18 |
17 | 60 to 600 bar | 16 | 26 |
18 | 0.5 to 5 mbar | ||
19 | 3 to 20 mbar | 4 | 7 |
20 | 10 to 50 mbar | 4 | 10 |
21 | 10 to 100 mbar | 4 | 16 |
22 | 25 to 250 mbar | 10 | 22 |
23 | 40 to 400 mbar | 20 | 40 |
24 | mbar 20 40 | 28 | 50 |
The company is engaged in manufacturing and supplying top of the line quality Electromagnetic Flowmeter to all the buyers from all over the globe. The Electromagnetic Flowmeter that we deal in is excellent in construction and is designed as per the stated international quality norms. All these years, we have been successfully shipping even the bulk orders of Electromagnetic Flowmeter within the promised time span. All the credit goes to our logistic network!
Specifications
Max Temperature | 150 Degree Centigrade |
---|---|
Wetted parts | SS 304 / 316, Teflon, PP / PVC |
Metering tube | Borosilicate glass |
Connection | Flange / Threaded |
Size | As per the requirement |
Max Pressure | 10 Kg/cm2 |
Accuracy | +/-1.5% of full scale |
Mounting | Inline |