Our Products
Earth Clamps
2 Products availableAdvanced Earth Interlocking System
2 Products availableEarthing Equipment
2 Products availablePacking Strap
1 Products availableStatic Discharge POLE
1 Products availableSmart Ground Detector
1 Products availableHuman Body Voltage Checker
1 Products availableEarth Relay Unit
1 Products availableThe Multi Channel Earthing system is designed to discharge all the static charge to ground once it makes the positive connection to all the connected equipments
The System will monitor the resistance between the equipment body and earth for <10 ohms and it will automatically shut down the process if resistance increases beyond 10 ohms or there is discontinuity in the ground connection (Interlocks Provided Optional)
The System has also facility to adjustable Monitoring resistance
The System has an additional feature that it displays Individual Channel Earth Resistance with respect to ground in Ohms on Screen along with Green & Red Earth Status Indication.
Application : To Earth & Monitor upto 20 Multiple Equipments like Drums, Tankers, Reactors, FDB, Sifters, Hoppers etc.
Certified as Per:
Certifications - CIMFR / PESO (Optional)- FLP Certified & IP 66
Complying to Standards : IS/IEC 60079-0:2007, IS/IEC 60079-11:2006
Continuous Earth Monitoring System CEMS-20/RM/0521 II 20 Channel Continuous Earth Monitoring System II Multi Channel Continuous Earth Monitoring System II Multi Channel Earth Loop Monitoring System II 20 Channel II CEMS 2021 II VITAL ENGINEERING INSTRUMENTS II Continuous Earth Monitoring System (CEMS - 0313)Continuous Earth Monitoring System CEMS-20/RM/0521
Additional Information:
Delivery Time : 1 Week
The Multi Channel Earthing system is designed to discharge all the static charge to ground once it makes the positive connection to all the connected equipments
The System will monitor the resistance between the equipment body and earth for <10 ohms and it will automatically shut down the process if resistance increases beyond 10 ohms or there is discontinuity in the ground connection (Interlocks Provided Optional)
The System has also facility to adjustable Monitoring resistance
The System has an additional feature that it displays Individual Channel Earth Resistance with respect to ground in Ohms on Screen along with Green & Red Earth Status Indication.
The System is available in following Models
Application : To Earth & Monitor upto 10 Multiple Equipments like Drums, Tankers, Reactors, FDB, Sifters, Hoppers etc.
Certified as Per:
Certifications - CIMFR / PESO (Optional)- FLP Certified & IP 66
Complying to Standards : IS/IEC 60079-0:2007, IS/IEC 60079-11:2006
ECVI is speciality clamp Intrinsically safe with visual indication on the clamp itself. (SS304 Earth Clamp Body)
It shows Green and Red indication in case of healthy and unhealthy earth connection respectively. The clamps are made of Pure SS304 Clamps with quality spring pressure and with 20.00 mm Jaw opening diameter to earth hazardous operations. The tips are made of tungsten carbide to penetrate through dust, coating, paint etc. and make a positive connection with the object.
Application : To Earth Mobile Equipments, Drums, Tankers, Reactors, FDB, Sifters, Hoppers etc.
Certified as Per:
IS/IEC 60079-0:2007IS/IEC 60079-11:2006IS/IEC 60529:2001
Marking on Equipment -Ex ib IIb Gb T4 ( 0to < Ta < +50)
The process of filling inflammable liquids for transportation or storage, safety standards and procedures must ensure that the static voltage which occurs during this process, should not lead to an explosion. To handle this static voltage, the vehicle or the container should be properly earthed. This is important so that the static voltage does not build up to a dangerous flash point . The Earthing method should be proper and perfect, otherwise dangerous losses can take place
WORKING PRINCIPLE
THE System should be used to monitor the earthing of the vehicle, static equipments, once connected it shows the actual earthing status with GREEN & RED IndicationGREEN INDICATION – HEALTHY EARTH - Loading / Unloading Process should Start or it gets automatically started through relay contactsRED INDICATION – UNHEALTHY EARTH Loading / Unloading Process should stop or it gets automatically stopped through relay contacts
Extra Features Like Resistance Display, Hooter, Adjustable Monitoring Resistance availble (Optional)
The process of filling inflammable liquids for transportation or storage, safety standards and procedures must ensure that the static voltage which occurs during this process, should not lead to an explosion. To handle this static voltage, the vehicle or the container should be properly earthed. This is important so that the static voltage does not build up to a dangerous flash point . The Earthing method should be proper and perfect, otherwise dangerous losses can take place
WORKING PRINCIPLE
THE System should be used to monitor the earthing of the vehicle, static equipments, once connected it shows the actual earthing status with GREEN & RED IndicationGREEN INDICATION – HEALTHY EARTH - Loading / Unloading Process should Start or it gets automatically started through relay contactsRED INDICATION – UNHEALTHY EARTH Loading / Unloading Process should stop or it gets automatically stopped through relay contacts
Extra Features Like Resistance Display, Hooter, Adjustable Monitoring Resistance availble (Optional)
The process of filling inflammable liquids for transportation or storage, safety standards and procedures must ensure that the static voltage which occurs during this process, should not lead to an explosion. To handle this static voltage, the vehicle or the container should be properly earthed. This is important so that the static voltage does not build up to a dangerous flash point . The Earthing method should be proper and perfect, otherwise dangerous losses can take place
WORKING PRINCIPLE
THE System should be used to monitor the earthing of the vehicle, static equipments, once connected it shows the actual earthing status with GREEN & RED IndicationGREEN INDICATION – HEALTHY EARTH - Loading / Unloading Process should Start or it gets automatically started through relay contactsRED INDICATION – UNHEALTHY EARTH Loading / Unloading Process should stop or it gets automatically stopped through relay contacts
Extra Features Like Resistance Display, Hooter, Adjustable Monitoring Resistance availble (Optional)
The loading and unloading of tank trucks, containers, mixers etc containing flammable or combustible products has long been recognized as one of the most serious fire and explosion risks for hazardous industry operations.
A study conducted by the American Petroleum Institute in 1967, for example, identified static discharges as being responsible for more than 60 incidents in tank truck loading operations, Mixing Operations, Drum Filling etc.
Since then more stringent preventive standards have been developed and significant advancements have been made in the technology of static electric discharge prevention. Yet accidents traced to static electric discharges still occur, with sometimes tragic results.
The natural presence of static electricity during product transfer operations, combined with its associated ignition hazards, ensure that regulators take static control precautions for tank trucks very seriously. The primary guidelines are detailed in three primary standards: NFPA 77, API RP 2003 and
Certified as Per:
Certifications - CIMFR / PESO (Optional) IP 66, Gas Group IIA IIB IIC(Optional)
Complying to Standards : IS/IEC 60079-0:2007, IS/IEC 60079-11:2006
The process of filling inflammable liquids for transportation or storage, safety standards and procedures must ensure that the static voltage which occurs during this process, should not lead to an explosion. To handle this static voltage, the vehicle or the container should be properly earthed. This is important so that the static voltage does not build up to a dangerous flash point . The Earthing method should be proper and perfect, otherwise dangerous losses can take place
WORKING PRINCIPLE
THE System should be used to monitor the earthing of the vehicle, static equipments, once connected it shows the actual earthing status with GREEN & RED IndicationGREEN INDICATION – HEALTHY EARTH - Loading / Unloading Process should Start or it gets automatically started through relay contactsRED INDICATION – UNHEALTHY EARTH Loading / Unloading Process should stop or it gets automatically stopped through relay contacts
Extra Features Like Resistance Display, Hooter, Adjustable Monitoring Resistance availble (Optional)
The process of filling inflammable liquids for transportation or storage, safety standards and procedures must ensure that the static voltage which occurs during this process, should not lead to an explosion. To handle this static voltage, the vehicle or the container should be properly earthed. This is important so that the static voltage does not build up to a dangerous flash point . The Earthing method should be proper and perfect, otherwise dangerous losses can take place
WORKING PRINCIPLE
THE System should be used to monitor the earthing of the vehicle, static equipments, once connected it shows the actual earthing status with GREEN & RED IndicationGREEN INDICATION – HEALTHY EARTH - Loading / Unloading Process should Start or it gets automatically started through relay contactsRED INDICATION – UNHEALTHY EARTH Loading / Unloading Process should stop or it gets automatically stopped through relay contacts
Extra Features Like Resistance Display, Hooter, Adjustable Monitoring Resistance availble (Optional)
Crocodile Earthing Clamps
We are engaged in offering this product to our clients. Our range of all products is widely appreciated by our clients.
SS Earthing Clamp with Spiral Earthing Cable 05, 10, 15 Metres
Static Discharge Touch Pad With LED Indication
We are engaged in offering this product to our clients. Our range of all products is widely appreciated by our clients.
Cold Resistance: 20 +/- 30 C
Country of Origin: Made in India
Brand: Vital
Usage/Application: Human Body Static Discharge
Model Name/Number: VITTP01-SS
Type: Static Discharge Touch Pad
Material: SS304
PAD Size: 30 x 30 cm
Anti Static Wrist Strap
Modes Of Operation
WORKING PRINCIPLE (Tri-mode Technology)
MODE 1 & 2 II With the grounding clamp and cable attached to the designated earth point on the road tanker through its patented circuitry the System detects the presence of the road tanker by its capacitance and not by impedance, resistance or the presence of a diode on the road tanker. At the same time the patented circuitry ensures that it has a connection to the general mass of the earth. This is a critical step as a connection to earth is the only means by which the static electricity can be transferred from the teeth of the clamp on the road tanker to earth thereby mitigating the accumulation of static electricity during the transfer.
MODE 3 II Once Modes 1 and 2 have been completed successfully the patented circuitry monitors the loop resistance from between the teeth of the clamp on the road tanker to the designated general mass of the earth through the System Ground connections. The circuitry will monitor the loop resistance and if it exceeds 10 Ohms it will stop the transfer.
ATTENTION II Driver / operator training is essential for the correct use of the grounding system. The first action in the material transfer process is grounding of the road tanker. The System clamp should be connected directly to the designated earthing point of the road tanker. The grounding clamp should NOT be removed until all other procedures in the material transfer process are complete.
Dry Contacts II The System output contacts can be interlocked with process equipment and/or strobes. Interlocking the grounding system with the process equipment can enhance the Standard Operating Procedures (SOP) before the movement of material can take place. Interlocking with strobes provides personnel with a wider field of view that the grounding SOP is underway. On rare occasions grounding clamps can be removed by operators or lose contact with equipment due to unstable connections being made initially or overstretching of the cable connected to the grounding clamp.
The grounding system, can, via the output contacts, halt the process. However, it should be borne in mind that the movement of the product may not stop even though the equipment (pump / impeller) has halted. This could lead to the continued generation of static charge. In such circumstances it is the responsibility of the site operator to ensure their SOPs cater for such scenarios. This assumes the grounding system has been installed in accordance with the Instruction Manual.
Additional Information:
Delivery Time : 1 Week
Static Discharge Pole for human body static Discharge