Our Products
Gearbox & Gear Parts
1 Products availableValves & Valve Fittings
1 Products availableElevators
1 Products availableDomestic Fans, AC & Coolers
1 Products availableChain Conveyors
1 Products availableConveyor Components
1 Products availableLocks And Safes
1 Products availableLeading Manufacturer, Supplier & Retailer of storage bunker, Hopper Silos and Inter connecting Chute.
Viswakirti Screw Coolersare continuous cooling or heating screw conveyor for bulks , powder, granules, pasty or muddy products.The cooling and heating function is accomplished through chilled water, steam or other thermal fluid passage into the screw and double jacket. |
The air extraction in the top opening allows the control of the atmosphere conditions above the products wet extraction , dried air injectionPaddles fixed to the screw allow a perfect homogenous treatment , mixing, conveying , and cooling or heating transfer. |
Upto 10M3/HMinimum Temperature +2CMaximum Temperature +900C |
Air Slidewithout the use of moving parts, these gravity conveyor transport fine, dry bulk materials, with a minimum of abrasive wear on the conveyor. |
Dry materials flows down inclined conveyor, fluidized by low-pressure air entering beneath porous medium. |
TheAir Slideconveyor is easily installed , with simple floor or overhead support which released valuable floor space for other used. Operation is dustless and noiseless with extremely low power consumption. Conveyor line needs no lubrication , and is self-cleaning , so there is almost no maintenance. |
Wet Scrapperis commonly conveyed to collect DUST at elevated temperature which includes Bagasse, Clay Dirt, Coal , Fly Ash & slag etc. Generally, construction is more or less identical to chain conveyor filled with water. However, differs in Tail end and Drive end. |
Wet Scrapper will always have;Tail End & Drive end are at inclined position normally.Double Strand.Low linear speed for highly abrasive material. |
Easy installation and High degree of homogeneity of conditioned material Variable throughout rates, wide range of construction materials, Easy cleaning, Modular system, Reduced overall dimensions , Little maintenance , No contamination.
ViswakirtiRotary Air Locksdesigned for either manual or remote controlled drive, are used under silo deck slabs and bins to permit the free flow of pulverized materials which tend to arch, such as lime and cement raw materials.
Free movement of the rotor to an opened or closed position is assured by careful machining and alignment of the trunnion shafts and dust-tight bearings.
Leakage in the closed position is prevented by close tolerance and double seal. Knife edges and v slots at the end of the rotor avoid sticking of packed material.
We are offering first-class qualityHopper Silos& we use finest raw material in the fabrication of this product.The offered storage hopper silos are available with hopper Bottom are used to store bulk material. |
We provide this product in custom form as per the requirements of the clients.Salient Featuresare Durable, Corrosion resistant & are in different sizes. |
Viswakirtivalve consists of two flaps connected by counterweights or spring loaded spindles, which are operated by means of a motor driven cam. The cam alternately opens each flap allowing materials to pass through the separate chambers in batch form and thereby ensuring a gas seal.
Viswakirtiare the leading manufacturer, supplier and exporter ofRack And Pinion Gatesin India.We provideRack And Pinion Gatesin order to fulfill the need of industries. We provide theseRACK AND PINION GATESat much competitive rates in the market.
Viswakirti Bucket Elevatorsare made to a high quality standard design based on CEMA/IS standards. |
Bucket Elevatorconsists of a series of uniformly fed buckets mounted on an endless chain or belt which operates overhead and foot wheels.The buckets are used to elevate (usually vertically) pulverized , granular , or lumpy materials. |
Casings are fabricated from MS sheets & liberally stiffened to give added load carrying capacity and true alignment.Chains are normally used for elevators with heavier duties, high capacities and lifts. |
Belts are recommended for handling free flowing materials as also for corrosive materials while pin and Bush type chain is normally used.Link Chain & U-Bolt combination is provided on heavy-duty elevators depending on the applications. |
The materials is received at the boot, raised and then discharged by passing overhead wheel at the top, into a discharge chute. |
Viswakirtidesign and manufacture chutes to meet specific customer requirements. Chutes are used for guiding the flow of bulk materials and connecting conveying and processing equipment together.