Our Products
Moisture Analyzer
2 Products availableOur product range contains a wide range of pin gauges and Magnascope/ magnifying glass
The instrument made on a horizontal platform. There is a gear motor fixed on the platform, the gear motor is connecting to the driving roller.
Additional Information:
Payment Terms : T/T
This device is specially designed for testing laboratories with high accuracy and foolproof results.
Additional Information:
Payment Terms : T/T
Degassing of carbonated beverages is necessary for quality control analysis. If there are variations in degassing it will influence values of PH, Brix Acidity & Aspartame results.
FEATURES
Just press a button and on completion of time degassing will stop automatically.
PREFORM CUTTER
Cutting Area 0 -42mm dia
Method of Cutting
1) Put off Metal stopper, open handle with two hands.
2) Put preform in the cutting blade area and start pressing slowly.
3) Repeat the operation till the preform is cut.
Warning
1) This product is made of metal. Please do not use in Induction area because it will have electrical conduction.
2) The front pa rt of blade is very sharp, anyway, please do not hold that part.
3) Please do not act any operation in the working area, especially to note the children, pets, moreover, you should put on the helmet anti-dust glasses, glove etc. for protecting yourself. Please do not stand on the roof and unstable place where you are using this product.
4) Please Do not let your hand close to the brake because it will clam your hand.
5) Please close the blade part after using in order to prevent metal stopper from choke when opening. Besides, Please keep out of reach of children.
Note:
1) Please do not neglect the above mentioned purpose and specification when using.
2) Before using, Please check the screws are loosened or not the parts are damaged or not. To use Ratter assuring everything is correct
The transport packages in all distribution system are subjected to varying intensities of vibrations. Vibration Test is carried out to assess the performance of a filled package in terms of its strength or protection that it offers to its contents when subjected to vibration. This test method simulates the transport hazards, to produce an equivalent effect or damage during the test. The equipment is suitable for testing containers of any form, material, kind, design with interior packing, means of closure and any size and weight.
Digital Balance weighs up to two decimal numbers, so it is very useful to weigh samples & chemicals in Paper, Plastic, textile laboratories, College & Universities.
SALIENT FEATURES
The shaker is mounted on ball bearing crankshafts to give an orbital circular motion to the flasks within a diameter of 2". Body made of thick Mild steel duly powder coated .
SHAKING SYSTEM
The efficient and diligent shaking system of our shaker has a shaking movement which is powered by a reliable heavy duty DC motor. The variable speed motor at the base the complete unit is mounted on a angle iron frame. Compact counter balanced drive mechanism ensures high stability and reliability even in continuous operation & uneven load distribution.
SHAKING SPEED
Colour Matching Cabinet is used for visual inspection of any colour material like textile, paper, paint, ink, Plastic etc. Standard Light sources are used for accurate testing and inspection. Colour Matching Cabinet is made of Ply Board as per availability at the time of delivery. This Light Box is also known as Shade Matching Booth.
Technical Specification:
Light Sources & Colour Temperature
Optional
Triangle Sample Holder
Electrical Supply
Standard booths are made for connection to a electrical supply 210-250 volts, 50 HZ, single phase AC supply.
The GMS Round cutter is used to determine GSM (Grams per square meter) of the fabric (Woven Non-woven or knitted) and paper, film, foam, carper and board. The main body of the Round Cutter is made of fine quality aluminum casting for lightweight and resilience.
Specifications
Core/Cone Collapsing Strength Tester is an easy to use and efficient tester intended for measuring the quality of paper tubes, Paper Cores and Paper Cones in terms of the amount of compressive force a Core/Cone can take before collapsing. Paper tubes, bobbins & cones etc. are used as yarn carriers while paper cores are generally used for paper & plastic film reels. Collapsing Strength Tester is designed in such a manner that gradually increasing force is generated & applied on the surface of carriers. The sharp collapsing point can be easily detected on a dial and a suitable reading can be taken.
FEATURES
This crush tester is used for testing the Ring Crush, Edge Crush Strength of the paperboard with the proper accessories. A high accurate load cell detects the compression signal via the analyses of test program to display the test results on the indicator.
The Ring Crush Tester is used to determine the compression strength of a material. With the help of various accessories, the instrument can be used for measurement the compression strength of liner & fluting as well as of corrugated board. Ring Crush Tester is easy to use. The maximum measured force exerted during the test is automatically presented on the built in DISPLAY & value is hold until next Test Start. You can test from Crush Tester as RCT, FCT, ECT, CLT, CCT etc. (Accessories are optional for these tests)
Polariscope is used to view the internal material stresses and material flow characteristics of PET preforms and containers. This is ideal for laboratory use and at-the-line preform and bottle inspection
Defects in preform can be easily detected by using this equipment. When a preform is held parallel to viewing field colour pattern is seen known as isochromatic fringe. This indicates magnitude of the stresses introduced during moulding process. When a preform is held 45 deg to viewing field a coloured pattern known as isoclinic is seen, this indicates direction of stresses.
‘TBG’ Polariscope is used in the preform assembly to check the possible defect in the preforms. Take the precautions at the early stage would help a lot in cost cutting and time-saving. A defect chart is provided to understand these defects.
FEATURES
Hot Wire Bottle Cutter offers an easy and cost saving way for cutting containers for section weight analysis. A clean section without deformation will be obtained by a quick cutting of bottles through heated hot wires. A precision and repeatable cutting task is easy to achieve and it’s necessary for a proper analysis. PET bottle could be cut up to 5 predetermined sections, each section will be checked to ensure that it conforms to the exact weight assigned.
Feature :
Main features:
Technical specifications:
These meters are used in gloss, brightness and opacity measuring applications in various industrial sectors. Designed with utmost precision in compliance with the international quality standards, this tester is offered to our clients in various standard as well as customized specifications.
Additional Information:
Payment Terms : T/T
Delivery Time : 3-4 weeks
Its inner chamber and outer chamber is constructed from stainless steel 304 grade. Sealing of Lid by Rubber Gasket and Lid is fitted with Pressure Gauge & Safety Valve.
Additional Information:
Payment Terms : T/T
Humidity Chamber made of cubical shape, the inner body of the chamber made of Stainless Steel, there is a Stainless Steel water tank at the bottom of the chamber, an immersed heater is fitted to the tank for making Humidity. There are two wire mesh tray are also fitted to the chamber, the tray are removable, the test specimen are hold by the trays. There is a hinged door on the front of the instrument; a glass window is fitted to the hinged door. The outer body is made of Mild Steel duly powder coated to give it a corrosion resistant long life. There is a control panel on which digital Humidity Controller, a Digital Temperature and Switches for cooling, heating, humidity and mains are mounted. The cooling is done by Compressor and heating is done by Heaters. The Temperature Sensor and Humidity Sensor are fitted within the chamber.
DRY SAND ABRASION TEST RIG has been designed as per ASTM G 65 specifications.
Additional Information:
Payment Terms : T/T
Use for Preform
Lipstick break load tester.
Additional Information:
Payment Terms : T/T
Additional Information:
Payment Terms : T/T
SPECIFICATION:
Robust construction and inner chamber is made out of Stainless Steel 304 grade and outer chamber is of mild steel duly powder coated Outer front double walled door is insulated and is fitted with magnetic tape for air tight closing for no temperature loss, provided with lock and key arrangement.
A full view inner Glass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature. High grade PUF Iinsulation between outer and inner chamber for minimal thermal losses. Direct cooling system for stable temperature control by ISI marked Compressor/Condensing Units CFC free & R-134 an eco friendly refrigerant and R-23 for saturation.
Control panel having all controls and circuitry with Temperature controller cum Indicator Microprocessor based with LED display for Set Value (SV) & Process Value (PV) to select any desired temperature. Caster wheel mounted for easy portability. Supplied with cord and plug. Operating Voltage: 220 Volts AC (50 Hz).
Our Oscillating Disc Rheometer is an efficient, easy to use and reliable testing equipment.
Secure Seal Tester is designed to check bottle and closure thread integrity and Seal strength for Glass / PET Beverage Containers with Plastic Closures Most Useful for Carbonated Drinks.
Additional Information:
Payment Terms : T/T
This is an optical instrument that employs the measurement of refractive index to determine the % Brix of sugar in aqueous solutions. The method is both simple and quick.
This Moisture analyzer is used to check the moisture in preforms, Plastic and granulales etc.
The equipment is suitable for testing containers of any form, material, kind, design with interior packing, means of closure and any size and weight.
Additional Information:
Payment Terms : T/T
The Vacuum Leak Tester can be used for checking seal strength of various products like Flexible Pouches / Cups / Blister Packs / Tablet Strip / Sachets / Bottles and many other similar packings.
Additional Information:
Payment Terms : T/T
Specimen Cutting Press- Hydraulic tests are conducted on various materials or products and the test sample / slab is placed over a flat and smooth piece of plywood, hardwood, rigid plastic, or hard rubber (ebonite) while the cutting die is pressed down from the top to cut out the test specimens. We manufacture these test specimens of specified shapes and size which are to be cut out of the test samples and available in different designs and varied price as per the customer specification.
This Vacuum Tester is for Filled Bottle finds usage for hot fill juices / jams ketchup / pulp /vacuum packed tea pouches.
Additional Information:
Payment Terms : T/T
Water Vapour Permeability Tester made of twelve brass bottles.
Additional Information:
Payment Terms : T/T
Additional Information:
Payment Terms : T/T
Laminar Air Flow Benches Vertical are designed so as to meet the requirement of US Federal Standard 209 E (class 100) providing particle free air to meet class 100 conditions mainly used for various works that require maintenance of the cleanness and purity.
Additional Information:
Payment Terms : T/T
Film Shrink Tester is used to measure the effect of temperature on plastic films. The application of heat causes certain plastic films to rapidly contract.
Additional Information:
Payment Terms : T/T
Digital pH Meter is ideal instrument for determination of pH Value of any solution.
Additional Information:
Payment Terms : T/T
Our Spring Steel tapes are suitable for use with all materials and in noncorrosive environments.
Additional Information:
Payment Terms : T/T