Our Products
Air Compressors, Accessories & Parts
2 Products availableIndustrial Jacks, Lifts & Winches
1 Products availableInsulators
1 Products availableRubber Tubes
1 Products availableIndustrial Machinery
1 Products availableExpansion Joints
1 Products availableCompression Springs & Air Springs
1 Products availableLeading Manufacturer, Supplier & Retailer of Precision wedge mount, Base Screw Support Mounts, FabRub Spring and Isolating Washers.
MODEL NO. | COLOR CODE | LOAD IN KGS | DEFLECTION AT RATED LOAD +/- 8% mm |
NOMINAL DIMENSIONS | |||||
A mm | B mm | C mm | D mm | E mm | H mm | ||||
CFM-A-1 | Black | 120 | 4.8 | 75 | 85 | 128 | 89 | 11 | M12 |
CFM-A-2 | Red | 160 | 5.2 | ||||||
CFM-A-3 | Blue | 240 | 4.8 | ||||||
CFM-A-4 | Green | 320 | 4.3 | ||||||
CFM-B-1 | Black | 270 | 4.5 | 110 | 148 | 205 | 125 | 17 | M16 |
CFM-B-2 | Red | 380 | 4.5 | ||||||
CFM-B-3 | Blue | 480 | 4.5 | ||||||
CFM-B-4 | Green | 690 | 4 | ||||||
CFM-C-1 | Black | 550 | 4.6 | 110 | 148 | 205 | 165 | 17 | M16 |
CFM-C-2 | Red | 850 | 4.6 | ||||||
CFM-C-3 | Blue | 1040 | 4.6 | ||||||
CFM-C-4 | Green | 1580 | 4.6 |
Vishwaraj Precision Wedge Mount is designed for applications requiring passive damping and installation of high load equipment. The design incorporates a high-precision leveling system for easy height adjustment. The large supporting surface of the wedge mounts permit optimum foundation support and rigidity. High solidity and equally high vibration insulation is obtained through the addition of selected insulating plates. The rectangular shape of the Mount is yet another advantage. While providing greater resistance to machine "walking" than circular mounts, the straight leading edge surface on the rectangular mount has proven to be more geometrically stable. This helps eliminate pad roll and entrapment of coolants and oils beneath the pad. In addition, each isolation pad is engineered to possess an exceptionally high coefficient of friction that also prevents machine "walking".
Advantage:
1. Reduced shock and vibration 2. Heavy Duty machinery mount system3. Two height ranges in one mount4. Fast, Precise leveling of machine & prevent machine walking5. Good stability due to non slip character of plates 6. Highly effective insulations in the active and passive range. In particular when used on upper floors.7. Increased equipment life 8. Simplified machine installation 9. Elimination of anchor bolts 10. Uneven floors accommodated 11. Horizontal impact capabilities
TYPE | LOAD Kgs | LENGTH mm | WIDTH mm | HEIGHT in intermediate position mm | RANGE OF ADJU. mm |
PM-0-A | 500 | 100 | 60 | 57 | 8 |
PM-0-B | 750 | 100 | 60 | 67 | 8 |
PM-0-C | 300 | 100 | 60 | 67 | 8 |
*PM-0-E | 1400 | 100 | 60 | 40 | 8 |
PM-1-A | 900 | 150 | 75 | 65 | 10 |
PM-1-B | 1200 | 150 | 75 | 75 | 10 |
PM-1-C | 780 | 150 | 75 | 75 | 10 |
*PM-1-E | 3500 | 150 | 75 | 44 | 10 |
PM-2-A | 1950 | 200 | 100 | 70 | 10 |
PM-2-B | 2200 | 200 | 100 | 80 | 10 |
PM-2-C | 1400 | 200 | 100 | 80 | 10 |
*PM-2-E | 5900 | 200 | 100 | 55 | 10 |
PM-3-A | 3200 | 200 | 200 | 70 | 12 |
PM-3-B | 4400 | 200 | 200 | 80 | 12 |
PM-3-C | 2800 | 200 | 200 | 80 | 12 |
*PM-3-E | 12000 | 200 | 200 | 55 | 12 |
As Vibration Isolator :Vishwaraj Rubber Bellows are manufactured with indigenous technology and provides complete solution for the vibration isolation and support of machines. The Air Spring gives consistently good isolation even under changing loads. It isolates both low-frequency vibrations and structure borne noise. | ||||||||||||||
As Pneumatic Actuator : Vishwaraj Rubber Bellows are ideal for many applications in mechanical engineering and in the construction for machinery and equipments. Air Actuators, like cross ply tyres, are made of a fabric-reinforced rubber bellow completed with connecting parts to form an airtight system. By use of high grade materials and modern manufacturing methods, the safety requirements ofthe industry are met. Advantages:
|
Technical Data : | |
Medium : | Compressed Air, Non Lubricated |
Operation : | Single / Acting |
Operating Pressure : | 100 PSI Maximum |
Operating Temperature : | -40 to +70 degree Centigrade |
Nominal Diameter : | 3.1/2”, 4.1/2”, 6”, 8”, 9”, 10” & 12” |
Stroke Lengths: | From 20 to 300mm Maxi. depending on diameters & numbers of convolutions |
Material :End Plates : | Zinc Chromated Steel Rubber Parts- Fabric Reinforced NR SBR BR compound |
Vishwaraj offers Base Screw Support Mounts, a reliable & economic vibration damping designed for installation of all kinds of machinery. These mounts comprised of an Anti Vibration Rubber Pads at the bottom and a load distribution plate on top with respective mounting hole on it. The Rubber Pad fitted has designed to grip mounting surfaces and has a solid base design. For leveling purposes you can easily use Machine Foundation Bolts.
Type | Maxi Load / Kgs | Diameter / MM | Height / MM | |||||
A | B | C | ||||||
R-50 | 145 | 155 | 50 | 55 | 20 | |||
R-80 | 390 | 510 | 135 | 80 | 20 | |||
R-110 | 810 | 990 | 315 | 120 | 25 | |||
R-150 | 1475 | 1825 | 460 | 160 | 33 | |||
R-200 | 2490 | 3520 | 1025 | 200 | 33 | |||
Type | Maxi Load / Kgs | Plate Size MM | Height / MM | |||||
A | B | C | Length | width | ||||
S-50 | 150 | 190 | 63 | 50 | 50 | 20 | ||
S-80 | 460 | 530 | 158 | 100 | 60 | 25 | ||
S-110 | 990 | 1180 | 395 | 150 | 75 | 25 | ||
S-150 | 1775 | 2200 | 690 | 150 | 150 | 33 | ||
S-200 | 2975 | 4075 | 1415 | 200 | 200 | 33 |
Vishwaraj FabRub Spring fabric and rubber spring provides a new and unique way to make use of the many advantages of rubber as an industrial application fields because of their reliability, corrosion resistance, low cost, and basic simplicity. When a coil spring fails, it will often crack allowing fragments of the coil to damage equipment. This problem is eliminated with the rubber construction of FabRub Spring. Additionally, FabRub Spring exhibit exceptionally high overload characteristics and usually do not fail catastrophically, offering some support even during failure. FabRub Spring have no moving parts. No maintenance or lubrication is required and reduce structurally transmitted noise caused by vibration. The excellent performance has been proven in the damp and corrosive environments of mines and mills where a standard coil spring will fail. Due to the rubber construction, these springs do not bottom-out like coil springs under overload
Construction :- | ||
Unique construction elements are the key to the Vishwaraj FabRub Spring springs design flexibility. The basic construction includes a solid rubber core with a hollow center, and several plies of fabric reinforced rubber as an outer cover. These elements may be modified to meet specific load and performance requirements. | ||
1. Advantages :- | ||
1. Constant Vibration Isolation with Changing Loads.2. Does Not Bottom-Out.3. Eliminates Downtime and Potential Damage to Machinery.4. High Load Carrying Capacity.5. Excellent Vibration Isolation.6. Lateral Vibration Isolation.7. Compact Overall Size.8. Corrosion Resistant, Durable & Long Life.9. Increased Stability at Higher Percentages of Compression.10. Effective Noise Reduction.11. Low Cost.12. Maintenance Fre |
Model No. | OD | ID | Length | Min Load (Kgs) | Natural Frequency | Max Load (Kg) | Natural Frequency | ||||
Load | Height | CPM | Hz | Load | Height | CPM | Hz | ||||
FRS-1 | 41 | 16 | 44 | 65 | 38 | 414 | 6.9 | 140 | 32 | 304 | 5.1 |
FRS-2 | 41 | 16 | 89 | 62 | 76 | 279 | 4.7 | 140 | 65 | 253 | 4.2 |
FRS-3 | 83 | 32 | 127 | 178 | 108 | 251 | 4.2 | 400 | 92 | 186 | 3.2 |
FRS-4 | 76 | 25 | 102 | 187 | 86 | 174 | 2.9 | 400 | 74 | 161 | 2.7 |
FRS-5 | 76 | 25 | 76 | 211 | 65 | 293 | 4.9 | 410 | 55 | 162 | 3.6 |
FRS-6 | 102 | 51 | 152 | 236 | 130 | 216 | 3.6 | 490 | 110 | 165 | 2.7 |
FRS-7 | 89 | 25 | 152 | 253 | 130 | 223 | 3.7 | 540 | 110 | 165 | 2.8 |
FRS-8 | 114 | 51 | 152 | 320 | 130 | 235 | 3.9 | 750 | 110 | 156 | 2.6 |
FRS-9 | 114 | 25 | 178 | 498 | 151 | 213 | 3.6 | 1130 | 129 | 158 | 2.6 |
FRS-10 | 152 | 35 | 203 | 700 | 184 | 206 | 3.25 | 1600 | 163 | 148 | 2.45 |
FRS-11 | 152 | 25 | 203 | 990 | 173 | 191 | 3.25 | 2100 | 147 | 144 | 2.4 |
FRS-12 | 191 | 89 | 254 | 1005 | 216 | 176 | 2.88 | 2325 | 184 | 142 | 2.3 |
FRS-13 | 140 | 51 | 178 | 700 | 151 | 181 | 3.01 | 1490 | 129 | 175 | 2.9 |
FRS-14 | 120 | 50 | 150 | 350 | 130 | 208 | 3.5 | 705 | 110 | 160 | 2.7 |
Isolating Washers are specially designed for Machine Anchoring application. To avoid deformation, it is bonded with M S Washer. These washers are used to isolate machine vibration transferring through bolts to the foundation. Washers are available in different sizes according to the bolt size.
BOLT SIZE | OD | ID | THICKNESS - mm |
M 10 | 32 | 12 | 8 |
M 12 | 32 | 14 | 12 |
M 16 | 50 | 18 | 16 |
M 20 | 50 | 22 | 20 |
M 25 | 60 | 27 | 25 |
M 28 | 80 | 30 | 28 |