Size ranges :Outer Dimension (20 mm OD to 50 mm )
Grade :Yst 210, 240, & 310
Specification Code :IS-9537 (PART-2)/1981

Advantage :

1. Electromagnetic Interference (EMI) shielding
2. Competitive life-cycle costs.
3. Physical protection of conductors:
4. Chemically compatible with concrete.
5. Coefficient of expansion compatible with common building materials.
6. Proven equipment grounding conductor.
7. Non-combustible
8. Recyclable.
9. High tensile strength.
10. Adaptable to future wiring changes.

Its unique qualities of being fastest economic , versatile & safe make its use universal and irresistible .Its Fabricated out of requisite grade virgin steel i.e. 40 NB B-Class ERW Steel Tubes. The connection point is set at 500/1000 mm intervals .To handle the hazards of rough site handling malleable cast iron is used to cast out mobile captive cups and the bottom cups are of high quality virgin H.R Sheets duly welded to MS Steel Tube .Loose or Welded joint Pins are provided for strong and hassle free bonding between Vertical (Standard) members. These verticals are then joined with identical fit in Horizontal members having forced end ledger blades to slide into the cups of the verticals.

This is line if products are available in Square and or Round tube steel. All towers are hot-dipped galvanized and are available in various heights from 20 to 80 feet. All designs are engineered to tilt down the ground level making maintenance ease a priority. This product meets and exceeds rail industry standards and tamper resistant with our lack in position feature. VPL can also provide other various sizes upon request and look forward to providing a proposal to fit our customer demand.

Vertical comes in a wide range of sizes e.g 3.00, 2.50, 2.00, 1.50, 1.00 & 0.5 Mtrs apart from any specific size to keep in the requirement of the clients. These verticals are fabricated out of 40 NB B-Class ERW Steel tubes and have connections points at fixed interval of 500/1000 mm. The top end has an optional inner or outer socket welded to the vertical for joining the two verticals.

Rectangular welded frames are fabricated with 2 Nos.of Verticals and 2 Nos Horizontal members out of 40 NB B-Class ERW Steel Tubes. To meet the requirement of height, the top end of vertical members are provided with welded inner/outer sockets to join 2 frames vertically. Horizontally these frames are provided with scissor type cross braces. 50 NB B-Class ERW Steel Tubes are used in H frames to withstand heavier structures as well as for the heightened constructions. Sizes available are: 2000 X1250 mm, 1500 X 12550 mm, 1250 X 1250 mm, 1000 X 1250 mm, 900 X 1250 mm.

MS Round Bars of 32.00, 36.00 & 38.00 mm are used to fabricate Adjustable U Jack with 4 TPI Acme/Square threads. U Head is fabricated out of 100 X5 mm MS Flat Malleable cast iron Cup Type/Double Handle heavy duty nuts.Sizes available are 350, 450, 550, 600 mm of Bar Length.

The cuplock has an innovative and effective replacement in the form of Wedgelock .The wedgelock system is an advanced form of scaffolding where there is a four-way moveability and minimum chances of loose movement. The bottom cups are replaced by V-shaped steel pressings and they perform the dual purpose of Transom units as well.

MS Round Bars of 32.00, 36.00 & 38.00 mm are used to fabricate Adjustable Base Jack with 4 TPI Acme/Square threads. The Base Plate is fabricated out of 150 X 150 X 5 mm MS Flat & malleable cast iron Cup Type Light/Double Handle Heavy Duty Nuts.Sizes available are 350, 450, 550, 600 mm of Bar Length.

Steel Tubes For Structural Purposes
Size ranges :15 mm NB to 250 mm NB
Grade :Yst-210 & 240
Specification :IS-1161:1998

Advantage :

1. Increased cost savings
2. High resistance to torsional loading
3. Ease of welding in the shop and field
4. Greater strength-to-weight
5. Excellent compression and support characteristics and superior torsional resistance
6. Make it particularly well suited to all types of column applications
7. It is made from steel, one of the worlds most recyclable and recycled materials
8. Torsional strength
9. Less surface area than open sections allows for reduced clean up and painting
10. Wide variety of shapes and wall thicknesses are available
11. The uniform shape makes it easy to fabricate and well suited for architecturally
12. Exposed applications

uPVC Conduit Pipes
Size ranges :CLASS LIGHT & MEDIUM (20mm to 50mm)
Grade :L, M & H
Specification :IS-9537 (PART-3)/1983

Advantages :

1. Cost Effective
2. Inside surface is smooth , so wires can be pulled in them very easily.
3. Light in weight
4. Resistant to chemical attack
5. High tensile & Impact strength
6. Long Life.
7. Corrosion resistant
8. Fire resistant

uPVC Pipes For Potable Water Supply
Size ranges :CLASS 1-90 to 250mm, CLASS 2 & 3-63 to 250 mm CLASS 4 & 5-40 to 250 mm
Grade :PN 2.5 TO PN 12.5
Specification :IS-4985:2000

Advatages :

1. uPVC is a thermoplastic material so is very resistant to pH corrosion.
2. uPVC is not conductive , and therefore is not susceptible to galvanic corrosion.
3. No painting required.
4. Very smooth (inside & outside surfaces), So Lower Frictional losses.
5. Does not support bacterial growth.
6. Most economical in installation
7. Maintenance free.

Hdpe Pipes For Potable Water Supply
Size ranges :110mm 450mm
Grade :PE-63, 80, 100 PN 2.5 TO 12.5
Specification :IS-4984-1995
Advantages :

1. Zero leaks
2. Corrosion & Chemical Resistant
3. Best for environment
4. Lightweight & Flexible.

Size ranges :Outer Dimension (20 mm OD to 50 mm )
Grade :Yst 210, 240, & 310
Specification Code :IS-9537 (PART-2)/1981

Advantage :

1. Electromagnetic Interference (EMI) shielding
2. Competitive life-cycle costs.
3. Physical protection of conductors:
4. Chemically compatible with concrete.
5. Coefficient of expansion compatible with common building materials.
6. Proven equipment grounding conductor.
7. Non-combustible
8. Recyclable.
9. High tensile strength.
10. Adaptable to future wiring changes.

Its unique qualities of being fastest economic , versatile & safe make its use universal and irresistible .Its Fabricated out of requisite grade virgin steel i.e. 40 NB B-Class ERW Steel Tubes. The connection point is set at 500/1000 mm intervals .To handle the hazards of rough site handling malleable cast iron is used to cast out mobile captive cups and the bottom cups are of high quality virgin H.R Sheets duly welded to MS Steel Tube .Loose or Welded joint Pins are provided for strong and hassle free bonding between Vertical (Standard) members. These verticals are then joined with identical fit in Horizontal members having forced end ledger blades to slide into the cups of the verticals.

Swaged Type Steel Tubular Poles

Size ranges :410SP-1 to 410SP-60
Grade :Fe-410
Specification :IS-2713 (PART-1 TO 3)

The product, our Swaged Pole for Lighting suitable for use in a variety ofis designed to be used with or without bracket arm. The swaged pole range is also available in Solar Post Top arrangement. This pole is available with a maximum nominal mounting height of up to 10 metres, to be installed as foundation flange plate type or direct planting type.

The bracket arm can be either in single or double con figuration with maximum span of up to 2.0 metres. The product specification herein represents the standard range, but other heights and section sizes can be custom designed to meet specific requirements.

Features :

1. High quality attractive construction
2. Easy to Transport

This is line if products are available in Square and or Round tube steel. All towers are hot-dipped galvanized and are available in various heights from 20 to 80 feet. All designs are engineered to tilt down the ground level making maintenance ease a priority. This product meets and exceeds rail industry standards and tamper resistant with our lack in position feature. VPL can also provide other various sizes upon request and look forward to providing a proposal to fit our customer demand.

Extra Deep Well Hand Pumpsdischarges 12 litres (minimum) per minute per 40 strokes with an average installation range of the cylinders varying between 45 m to 90 m below ground level. These pumps are available with Normal stand & telescopic stand. Using finest quality steel , integrated with advanced working mechanism. These pumps offer optimum water discharge and are suitable for preventive maintenance with simple tools. These products are highly reliable and durable. Extra Deep Well Pumps set consists of the

Features: Pump Type:India Mark III Deep Well Pump as per Bureau of Indian Standard Specifications with 63.5 mm dia cast iron brass sleeved open top cylinder assembly.

1. Recommended for water level setting depth (meters) : 20-45
2. Minimum ID of bore ( mm) : 125
3. Approximate Discharge (Litres/ Hour) : 900
4. GI Riser Pipe : 65 mm NB X 3 meter length
5. MS/ SS Connecting Rod Diameter : 12 mm X 3 meter length.

Vertical comes in a wide range of sizes e.g 3.00, 2.50, 2.00, 1.50, 1.00 & 0.5 Mtrs apart from any specific size to keep in the requirement of the clients. These verticals are fabricated out of 40 NB B-Class ERW Steel tubes and have connections points at fixed interval of 500/1000 mm. The top end has an optional inner or outer socket welded to the vertical for joining the two verticals.

Rectangular welded frames are fabricated with 2 Nos.of Verticals and 2 Nos Horizontal members out of 40 NB B-Class ERW Steel Tubes. To meet the requirement of height, the top end of vertical members are provided with welded inner/outer sockets to join 2 frames vertically. Horizontally these frames are provided with scissor type cross braces. 50 NB B-Class ERW Steel Tubes are used in H frames to withstand heavier structures as well as for the heightened constructions. Sizes available are: 2000 X1250 mm, 1500 X 12550 mm, 1250 X 1250 mm, 1000 X 1250 mm, 900 X 1250 mm.

MS Round Bars of 32.00, 36.00 & 38.00 mm are used to fabricate Adjustable U Jack with 4 TPI Acme/Square threads. U Head is fabricated out of 100 X5 mm MS Flat Malleable cast iron Cup Type/Double Handle heavy duty nuts.Sizes available are 350, 450, 550, 600 mm of Bar Length.

Features:

1. India Mark II Deep Well Hand Pump/ hand well pump as per Bureau of Indian Standard Specifications with 63.5 mm dia cast iron brass sleeved cylinder assembly.
2. The above ground mechanism is fabricated from welded steel plates and sections for strength , and hot dip galvanized for corrosion resistance.
3. A Chain and quadrant mechanism of the pump handle provides easy and accurate alignment of the connecting rod.
4. The handle Bar ( 32+ 1) mm has a high mechanical advantage and is designed to counter balance the weight of the connecting rods to reduce the pumping effort required by the user.
5. Sealed ball bearings for the handle on a stainless steel axle adds to the ease of operation and lower maintenance needs.

The cuplock has an innovative and effective replacement in the form of Wedgelock .The wedgelock system is an advanced form of scaffolding where there is a four-way moveability and minimum chances of loose movement. The bottom cups are replaced by V-shaped steel pressings and they perform the dual purpose of Transom units as well.

MS Round Bars of 32.00, 36.00 & 38.00 mm are used to fabricate Adjustable Base Jack with 4 TPI Acme/Square threads. The Base Plate is fabricated out of 150 X 150 X 5 mm MS Flat & malleable cast iron Cup Type Light/Double Handle Heavy Duty Nuts.Sizes available are 350, 450, 550, 600 mm of Bar Length.

Guyed towers feature an efficient design, economical construction and the ability to carry light to heavy accessory loads. Solid round pre-welded tower sections provide maximum strength while eliminating any concern for possible internal rust or corrosion.

Monopoles are single members self-supporting structures used in urban areas where space is limited. These steel-tapered poles are designed to carry communication equipment such as microwave, cellular, PCS, ESMR and two-way antennas.

Steel Tubes For Structural Purposes
Size ranges :15 mm NB to 250 mm NB
Grade :Yst-210 & 240
Specification :IS-1161:1998

Advantage :

1. Increased cost savings
2. High resistance to torsional loading
3. Ease of welding in the shop and field
4. Greater strength-to-weight
5. Excellent compression and support characteristics and superior torsional resistance
6. Make it particularly well suited to all types of column applications
7. It is made from steel, one of the worlds most recyclable and recycled materials
8. Torsional strength
9. Less surface area than open sections allows for reduced clean up and painting
10. Wide variety of shapes and wall thicknesses are available
11. The uniform shape makes it easy to fabricate and well suited for architecturally
12. Exposed applications