Vishal Surgical Co

Goregaon East, Mumbai, Maharashtra

The laparoscopic Veress needle is a specialized instrument used in laparoscopic surgery to create the initial access point (pneumoperitoneum) into the abdominal cavity. It is typically used before inserting the trocars (hollow tubes) through which the laparoscopic instruments and camera are introduced.

Here's how the laparoscopic Veress needle is used:

1. Patient Preparation: The patient is positioned appropriately for the laparoscopic procedure, usually under general anesthesia.
2. Needle Placement: The surgeon identifies the intended entry point for the Veress needle, typically around the umbilical region. The area is cleaned and prepped with antiseptic solution.
3. Needle Insertion: The surgeon holds the Veress needle like a pen and inserts it into the abdominal cavity through a small skin incision. The needle is advanced through the subcutaneous tissue, fascia, and peritoneum.

4.        Insufflation: With the needle confirmed in the correct position, carbon dioxide (CO2) gas is attached to the Veress needle, and insufflation is initiated. The gas fills the abdominal cavity, creating a pneumoperitoneum, which lifts the abdominal wall away from the underlying organs, creating a working space for the laparoscopic instruments.

5. Trocar Placement: After achieving an adequate pneumoperitoneum, the Veress needle is withdrawn, and a trocar (hollow tube) is inserted through the same incision. The trocar acts as a portal for introducing laparoscopic instruments and the camera into the abdominal cavity.

It's important to note that the laparoscopic Veress needle technique requires proper training and experience to ensure safe and accurate placement. Complications, although rare, can include injury to blood vessels or organs during needle insertion. Surgeons may choose alternative methods for accessing the abdominal cavity, such as the open Hasson technique or optical trocars, depending on the patient's condition and the surgeon's preference.

The open technique is compromised by the leakage of carbon dioxide and can also be time consuming. One alternative is to enter the abdomen using an optical trocar under direct view. Our aim was to determine whether the optical access trocar can be used to effect a safe and rapid entry in various laparoscopic procedures.

Laparoscopic aspiration needle is designed eitherto inject or aspirate the fluid during laparoscopic procedures. Made up of finest quality medical grade stainless steel for durability. Surgical grade material being used to provide the highest level of craftsmanship.

High frequency Biplar cable cord can be reuseable. Itconnects instruments through electrosurgical generator

Laparoscopic aspiration needle is designed eitherto inject or aspirate the fluid during laparoscopic procedures. Made up of finest quality medical grade stainless steel for durability. Surgical grade material being used to provide the highest level of craftsmanship.

The use of the BiClamp forvaginal hysterectomyleads to less blood loss and less postoperative pain, with similar results in these respects to laparoscopic surgery.

Biclamp cable can be used in Biclamp Forceps. Iit has high power Voltage. 

VSC Laparoscopic Bipolar L Hook

The bipolar L-hook is a specialized instrument used in various surgical procedures, including laparoscopic surgery, to dissect and coagulate tissues using bipolar energy. The L-hook design allows for precise tissue manipulation and dissection while simultaneously providing hemostasis (control of bleeding). Here are some common uses of the bipolar L-hook:

1. Dissection: The bipolar L-hook is used to perform delicate dissection and separation of tissues during surgery. It is particularly useful in procedures, such as in gynecological surgeries or hepatic procedures.
2. Hemostasis: The L-hook instrument has the ability to coagulate small blood vessels during tissue dissection.
3. Tissue Removal: The bipolar L-hook can be used to remove small or diseased tissue, such as polyps or lesions. The L-shaped jaws of the instrument allow for precise grasping and removal of tissue while simultaneously providing hemostasis.
4. Precise Cutting: In addition to its dissection and coagulation

We are the leading manufacturer and supplier of Laparoscopic Bipolar Maryland. Manufactured using raw materials of the best quality.

An extremely aggressive grasper, it is used basically for 1 function. It is used to hold the gall bladder while the organ is removed through a 10mm port site. Its ability to grasp very tightly is a function of its size, long, sharp teeth and the nature of a single action jaw.

SPECIFICATIONS Material Stainless Steel Usage Surgical Room Application Laparoscopic Surgery Type Clamp Diameter 10mm Function Laparoscopy Surgery.

VSC Needle holders are used to grasp and manipulate needles to enable free-hand suturing of surgical incisions within the body during laparoscopic procedures. Needle holder jaws are made of high quality tungsten carbide metal which gives very good grip over surgical needle.

VSC Laparoscopic Fan Retractor 3 Blade

A fan retractor, also known as a fan retractor system or fan retractor instrument, is a surgical tool used in various surgical procedures to retract tissues and provide exposure of the surgical site. It consists of multiple fan-shaped retractors connected by a central hub or handle. The retractors can be individually positioned and adjusted to hold tissues away from the surgical field, allowing the surgeon to perform the procedure effectively. Here are some common uses of a fan retractor:

1. Abdominal Surgeries: In abdominal surgeries, such as laparotomy or exploratory laparoscopy, a fan retractor can be used to retract the abdominal wall and adjacent structures. It helps provide a clear view of the surgical site, enabling the surgeon to access and manipulate organs or perform procedures such as tumor resection, hernia repair, or bowel surgery.
2. Thoracic Surgeries: Fan retractors can be utilized in thoracic surgeries, such as lung resection or open-heart procedures. They aid in retracting the ribs, chest wall, or lung tissue to create space for the surgeon to access the target area and perform the necessary surgical interventions.
3. Orthopaedic Surgeries: In orthopaedic surgeries, a fan retractor may be used to retract soft tissues, muscles, or tendons to gain access to bones or joint spaces. It facilitates exposure during procedures such as joint replacement, fracture repair, or spinal surgeries.
4. Neurosurgery: In certain neurosurgical procedures

VSC Laparoscopic Hemo Lock clip Applicator

A Hemolock clip applicators are used in laparoscopic surgery to apply Hem-o-Lok clips, which are absorbable or non-absorbable clips, for securing and occluding blood vessels or other structures. The Hemolock clip applicator is specifically designed to deliver and secure these clips during minimally invasive procedures. Here's how the Hemolock clip applicator is used:

1. Instrument Insertion: The Hemolock clip applicator is inserted through one of the trocar ports into the abdominal cavity, controlled by the surgeon from outside the patient's body.
2. Clip Loading: The Hemolock clip applicator is loaded with a Hem-o-Lok clip, which is a small, pre-formed metal or polymer clip that can be opened and closed to occlude vessels or structures.
3. Grasping and Placement: The surgeon uses the Hemolock clip applicator to grasp the blood vessel or structure that needs to be occluded. The applicator's jaws are opened, and the vessel or structure is positioned between them.

VSC Laparoscopic Hook Scissor New Design 5mm

A Laparoscopic hook scissors, also known as laparoscopic dissecting scissors or hook cautery scissors, are specialized instruments used in laparoscopic surgery for tissue dissection and cutting. They have a curved, hook-shaped blade at the end, which allows for precise and controlled dissection of tissues. Here are some common uses of laparoscopic hook scissors:

1. Tissue Dissection: Laparoscopic hook scissors are primarily used for dissecting and separating tissues during surgical procedures. The curved blade helps in accessing and dissecting tissues in areas that may be challenging to reach with straight instruments.
2. Blood Vessel Dissection: The hook-shaped blade of the scissors allows surgeons to carefully dissect and separate blood vessels during surgical procedures.
3. Tissue Cutting: The sharp tip and curved blade of the laparoscopic hook scissors enable precise cutting of tissues. They can be used to cut tissues such as ligaments, adhesions, or abnormal growths, while minimizing damage to surrounding structures.
4. Tissue Manipulation: Laparoscopic hook scissors can also be used for tissue manipulation, retraction, or grasping. The hook-shaped blade can provide a secure grip on tissue, allowing for controlled manipulation or retraction during the surgical procedure.

We have marked a distinct and dynamic position in the market by providing a high-quality array of Laparoscopic J Hook.

VSC Laparoscopic myoma screw is used to extract fibroids from the endometrium during myomectomy. The instrument is a coiled spring like structure that is attached to a handle with working length of 30 cm. Made of the finest medical grade stainless steel for durability.

ü  Laparoscopic Myoma Screw, also known as Uterine Manipulator Myoma Screw, is a surgical instrument used during laparoscopic myomectomy procedures.

ü  Myomectomy is a surgical procedure performed to remove uterine fibroids, also known as myomas, while preserving the uterus. Laparoscopic myomectomy is a minimally invasive technique that involves making small incisions in the abdomen to access the uterus using a laparoscope, a thin tube with a camera and surgical tools.

ü  During a laparoscopic myomectomy, a laparoscopic myoma screw may be used to manipulate and stabilize the uterus. It helps in the exposure and positioning of the uterus, making it easier for the surgeon to identify and remove the fibroids. The myoma screw is usually inserted through the cervix and anchored into the fibroid, providing a stable grip on the uterus for manipulation.

The laparoscopic myoma screw is designed to minimize trauma to surrounding tissues and facilitate the surgeon's visualization and access to the fibroids. It allows for precise manipulation and control of the uterus during the procedure, improving surgical outcomes and reducing the risk of complications.

VSC Laparoscopic Vessel Sealer Cutter Golden Jaw

A laparoscopic vessel sealer with a cutter is a specialized instrument used in laparoscopic surgery to simultaneously seal and cut blood vessels or tissue. It combines the functions of vessel sealing and tissue dissection into a single instrument, providing efficiency and precision during surgical procedures. Here's how a laparoscopic vessel sealer with a cutter is used:

ü  Trocar Placement: Trocars (hollow tubes) are inserted into the abdominal cavity through small incisions to provide access for the laparoscopic instruments, including the vessel sealer with a cutter.

ü  Instrument Insertion: The laparoscopic vessel sealer with a cutter is inserted through one of the trocar ports, controlled by the surgeon from outside the patient's body.

ü  Tissue Grasping: The surgeon maneuvers the jaws of the vessel sealer to grasp the blood vessel or tissue that needs to be sealed and cut.

ü  Sealing: Once the tissue is properly grasped, the vessel sealer with a cutter activates its energy function, typically using bipolar energy. The instrument applies a combination of pressure and energy to the tissue between the jaws. This causes the vessel walls to heat up, denature, and fuse together, creating a sealed section and preventing bleeding.

ü  Cutting: After sealing the vessel, the vessel sealer with a cutter has an integrated cutting mechanism.

Good Quality URS forceps Full rotatable Easy to use for surgery. We are Manufacturing forceps with good raw material. New technology will be developed 

Hook can be used to clear unwanted tissue beside linear tissue.The hook or the spatula may be used to mark out and coagulate a line for the division.

Hook can be used to clear unwanted tissue beside linear tissue.The hook or the spatula may be used to mark out and coagulate a line for the division.

TOT Needle (Transobturator Needles) are made of high quality medical grade materials. The TOT Needles are used to place Transobturator Sling System.

Vessel sealer With cutter is used in laparoscopic surgery. Advanced Features: Enhanced sealing and dissecting capabilities with very low lateral heating. Blade-less cut function makes surgery easier with a division of tissue

Hysteroscopy Flexible Scissors, also known as hysteroscopic scissors or resectoscope scissors, are specialized instruments used during hysteroscopy procedures. These scissors have a slender, flexible shaft and sharp blades at the distal end. They are designed to perform precise cutting and resection of tissue within the uterus. Here are some common uses of Hysteroscopy Flexible Scissors (5fr):

1. Resection of Polyps or Fibroids: Hysteroscopy scissors can be used to remove or resect polyps, which are abnormal growths of tissue in the uterus. They can also be used to cut and remove small fibroids, which are non-cancerous growths that can develop in the uterine wall.
2. Adhesiolysis: Adhesions or scar tissue can form within the uterus due to previous surgeries, infections, or other conditions. Hysteroscopy scissors can be used to carefully cut and remove these adhesions, restoring the normal shape and function of the uterine cavity.
3. Endometrial Ablation: Endometrial ablation is a procedure used to treat abnormal uterine bleeding by removing or destroying the endometrium, the lining of the uterus. Hysteroscopy scissors can be used to perform the resection or ablation of the endometrial tissue.
4. Myomectomy: Hysteroscopy scissors can be used to perform a myomectomy, which is the surgical removal of uterine fibroids. In some cases, small fibroids located within the uterine cavity can be accessed and resected using hysteroscopic scissors.
5. Excision of Uterine Septum: A uterine septum is a congenital condition where the uterus is divided by a wall or septum. Hysteroscopy scissors can be used to excise or remove the septum, allowing for a normal uterine cavity and potentially improving fertility outcomes.

It's important to note that hysteroscopy procedures and the use of hysteroscopy scissors require specialized training and expertise. These procedures are typically performed by gynecologists or surgeons who have experience in hysteroscopy and minimally invasive gynecological techniques. The specific use of hysteroscopy scissors may vary depending on the patient's condition and the surgeon's judgment.

Hysteroscopy is a medical procedure that involves examining the inside of the uterus using a thin, lighted tube called a hysteroscope. During the procedure, various instruments can be used to perform diagnostic or surgical interventions. One such instrument is the Hysteroscopy Flexible Alligator Grasping Forceps, which is designed specifically for hysteroscopic procedures.

The Hysteroscopy Flexible Alligator Grasping Forceps is a slender, flexible instrument with a long shaft and a pair of hinged jaws at the distal end. The jaws are designed to resemble the jaws of an alligator, hence the name. These forceps are typically used for grasping and manipulating tissues or objects within the uterus during hysteroscopy.

Some common uses of the Hysteroscopy Flexible Alligator Grasping Forceps (5fr) include:

1. Tissue Sampling: The forceps can be used to obtain tissue samples (biopsies) from the uterus. The flexible nature of the instrument allows for precise positioning and grasping of the targeted tissue.
2. Polyp Removal: Polyps are abnormal tissue growths that can develop in the uterus. The grasping forceps can be used to grab and remove polyps during hysteroscopy.
3. Foreign Body Retrieval: In some cases, foreign objects may become lodged in the uterus, such as an intrauterine device (IUD) that needs to be removed. The forceps can be used to grasp and retrieve the foreign body safely.
4. Lesion Excision: If abnormal growths or lesions are detected during hysteroscopy, the forceps can be used to grasp and remove them. This can include the excision of uterine fibroids or small polyps.
5. IUD Placement: The grasping forceps can also be used to assist in the placement of an IUD or other intrauterine devices. The jaws of the forceps can hold the device and help guide it into the appropriate position within the uterus.

It's important to note that the specific applications and uses of the Hysteroscopy Flexible Alligator Grasping Forceps may vary depending on the individual patient and the surgeon's preference. These forceps are typically used by trained healthcare professionals who have expertise in hysteroscopy procedures.

VSC Laparoscopic Suction Irrigation Trumpet Type 10-5 mm

In general, suction and irrigation instruments are commonly used in laparoscopic surgery to remove fluids, debris, and smoke from the surgical field while providing irrigation to improve visibility. These instruments typically consist of a handle connected to a tube or cannula, allowing for the suction or irrigation of fluids.

Cautery Pencil is also known as Monopolar cautery pencil / Electrosurgical Pencil, Electrocautery Pencil, or Monopolar pencil with 2 push buttons / ESU Pencil. It is a type of medical device which is used to cut and coagulate biological tissues. It is mainly used in electrosurgery procedures.

Laparoscopic vessel sealer cutter, also known as a vessel sealing device (VSD) or laparoscopic energy device, is a specialized instrument used in laparoscopic surgery to simultaneously seal and cut blood vessels or tissue. It combines the functions of vessel sealing and tissue dissection into a single instrument, providing efficiency and precision during surgical procedures. Here's how a laparoscopic vessel sealer cutter is used:

1. Patient Preparation: The patient is positioned appropriately for the laparoscopic procedure and placed under general anesthesia.
2. Trocar Placement: Trocars (hollow tubes) are inserted into the abdominal cavity through small incisions to provide access for the laparoscopic instruments, including the vessel sealer cutter.
3. Instrument Insertion: The laparoscopic vessel sealer cutter is inserted through one of the trocar ports, controlled by the surgeon from outside the patient's body.
4. Tissue Grasping: The surgeon maneuvers the jaws of the vessel sealer cutter to grasp the blood vessel or tissue that needs to be sealed and cut.
5. Sealing: Once the tissue is properly grasped, the vessel sealer cutter activates its bipolar energy function. The instrument applies a combination of pressure and energy, such as radiofrequency or ultrasonic energy, to the tissue between the jaws. This causes the vessel walls to heat up, denature, and fuse together, creating a sealed section and preventing bleeding.
6. Cutting: After sealing the vessel, the vessel sealer cutter has an integrated blade that cuts through the sealed tissue. The surgeon can activate the cutting mechanism, typically by pressing a button or lever on the instrument, to separate the sealed vessel or tissue from the surrounding area.
7. Repeat as Needed: The above steps are repeated for each blood vessel or tissue that requires sealing and cutting during the laparoscopic procedure.

The laparoscopic vessel sealer cutter provides the advantage of efficient and reliable vessel sealing while minimizing the need for additional instruments, reducing procedural time and improving surgical outcomes. It is commonly used in various laparoscopic procedures, including colorectal surgery, gynecologic surgery, and general surgery. However, it is important for surgeons to receive proper training and follow manufacturer instructions to ensure safe and effective use of the vessel sealer cutter.

Laparoscopic Bissinger Bipolar Forceps

Laparoscopic Bissinger Bipolar forceps are a type of surgical instrument used during laparoscopic procedures. These forceps are designed to perform delicate tissue manipulation and coagulation in a minimally invasive manner.

ü  Tissue Dissection: The forceps are used for precise dissection and separation of tissues. They can gently grasp and manipulate tissues, allowing surgeons to create a working space and expose the area of interest.

ü  Grasping and Manipulation: The forceps enable surgeons to grasp and manipulate various structures within the abdominal cavity. This includes grasping organs, sutures, or other anatomical structures for retraction, repositioning, or exposure.

 Laparoscopic Claw Forceps Rotatable Gall Bladder Extractor 10mm

The Laparoscopic Gall Bladder Extractor with a diameter of 10mm is a specialized instrument used during laparoscopic cholecystectomy, which is the surgical removal of the gallbladder. Here are the primary uses of the Laparoscopic Gall Bladder Extractor 10mm:

1. Gallbladder Extraction: The main purpose of the extractor is to safely and efficiently remove the gallbladder from the abdominal cavity. After the gallbladder has been dissected and detached from its attachments to the liver and bile duct, the extractor is used to grasp and extract the gallbladder through one of the small incisions made during the laparoscopic procedure.
2. Tissue Grasping: The extractor is also used to grasp and manipulate tissues during the surgical procedure. It can be utilized to hold and stabilize the gallbladder during dissection or to manipulate surrounding structures for better visualization and access to the surgical area.
3. Precise Instrument Control: The 10mm diameter of the extractor is compatible with standard 10mm trocars or cannulas used for the insertion of laparoscopic instruments. It allows for precise control and maneuverability within the abdominal cavity, facilitating the extraction process.

 Laparoscopic Rotatable Scissor

The Laparoscopic Rotatable Scissor with a 5mm diameter is a specialized instrument used during laparoscopic procedures for cutting and dissecting tissues. The key feature of this instrument is its ability to rotate, allowing for improved maneuverability and access to different angles within the surgical field. Here are some common uses of the Laparoscopic Rotatable Scissor 5mm:

üTissue Dissection: The rotatable scissor is used to cut and dissect tissues during the procedure. It is commonly used to create surgical planes, separate tissues, or divide structures such as blood vessels, ducts, or ligaments.

üPrecise Cutting: The scissor blades of the instrument are designed to provide precise cutting action, allowing surgeons to perform controlled and accurate tissue dissection. The rotatable feature enhances the surgeon's ability to reach and cut tissues at various angles and orientations.

Laparoscopy Needle Holder Karl Storz Type Right Curved Jaw

üThe Laparoscopy Needle Holder, specifically the Karl Storz Type Right Curved Jaw, is a specialized instrument used during laparoscopic procedures for holding and suturing needles. It is designed to provide a secure grip on the needle and facilitate precise needle manipulation within the abdominal cavity.

üSuturing: The needle holder is primarily used for suturing during laparoscopic surgery. It allows the surgeon to hold the needle securely while passing it through tissues and creating sutures.

üNeedle Manipulation: The needle holder provides the surgeon with a firm grasp on the needle, allowing for precise manipulation and control during suturing.

üTissue Approximation: The needle holder enables the surgeon to bring tissues together and approximate them accurately for suturing.

üKnot Tying: The instrument also aids in knot tying during laparoscopic suturing.

üRight Curved Jaw Design

VSC Laparoscopic Endo Knife

The Laparoscopic Endo Knife, also known as an Endo Knife or Laparoscopic Harmonic Scalpel, is a surgical instrument used during laparoscopic procedures. It combines the functions of dissection and coagulation, allowing surgeons to make precise incisions and control bleeding simultaneously.

The Laparoscopic Endo Knife operates using ultrasonic energy. It consists of a handpiece with a handle and a blade at the tip. When activated, the blade vibrates at high frequency, generating ultrasonic energy. This energy is used to cut through tissue while simultaneously sealing blood vessels, minimizing bleeding.

The Laparoscopic Endo Knife offers several advantages over traditional surgical instruments. It provides a precise cutting action, allowing surgeons to perform delicate dissections with improved visibility. The simultaneous coagulation helps control bleeding, reducing the need for additional hemostatic measures. The instrument is also designed to minimize thermal damage to surrounding tissues.

Laparoscopic vessel sealer cutters are specialized instruments used during laparoscopic procedures to seal and cut blood vessels and tissue. These devices combine the functions of vessel sealing and cutting into a single instrument, providing efficiency and precision. Here are some key uses of laparoscopic vessel sealer cutters:

1. Vessel Sealing: The primary use of the instrument is to seal blood vessels during surgery. It employs advanced energy modalities, such as bipolar or ultrasonic energy, to coagulate and seal vessels, effectively preventing bleeding and minimizing the risk of postoperative complications.
2. Tissue Dissection: Vessel sealer cutters are also used for tissue dissection. They allow surgeons to dissect and separate tissue planes, providing access to specific anatomical structures while minimizing bleeding.
3. Hemostasis: By sealing blood vessels, the instrument helps achieve hemostasis, which is the control of bleeding during surgery. This is particularly beneficial when operating in highly vascular areas or when encountering larger blood vessels.
4. Tissue Transection: In addition to vessel sealing, the instrument incorporates a cutting mechanism. Surgeons can use the cutter to divide sealed tissue or vessels, enabling precise transection and removal of tissue during the procedure.
5. Reduced Instrument Exchange: The integration of vessel sealing and cutting functions in a single instrument can reduce the need for frequent instrument exchanges during the surgery. This streamlines the procedure, improves efficiency, and potentially shortens operative time.
6. Minimally Invasive Approach: Laparoscopic vessel sealer cutters are specifically designed for minimally invasive laparoscopic procedures. They allow surgeons to perform vessel sealing and tissue dissection through small incisions, reducing patient trauma and promoting faster recovery.

It's important to note that specific designs and variations of laparoscopic vessel sealer cutters may exist, and the choice of instrument may depend on the surgeon's preference and the specific procedure being performed. Surgeons and medical professionals receive specialized training in the use of these instruments to ensure safe and effective outcomes during laparoscopic surgery.

VSC Laparoscopic Spoon Forceps/ Stone Removal Forceps

Laparoscopic Stone Removal Forceps, also known as Laparoscopic Stone Retrieval Baskets or Graspers, are surgical instruments used to remove stones from the urinary tract or bile ducts during laparoscopic procedures.

These forceps are specifically designed to grasp and retrieve stones that may be causing blockages or other complications. They are inserted through small incisions in the abdomen, known as trocars, and guided to the site of the stone using laparoscopic imaging technology.

Laparoscopic Stone Removal Forceps typically consist of a long, thin shaft with a handle on one end and a basket-like or claw-like structure on the other. The basket or claw is designed to open and close, allowing it to surround and securely grip the stone for removal. The forceps may also have a mechanism to manipulate the basket, allowing for controlled movement and positioning of the stone during the retrieval process.

Once the stone is grasped by the forceps, it is carefully extracted from the body through one of the trocar incisions. The procedure is performed under visual guidance provided by the laparoscope, ensuring precision and minimizing damage to surrounding tissues.

The Laparoscopic Port Closure Cobbler is a specialized instrument used for closing the port sites created during laparoscopic surgery. After the completion of the laparoscopic procedure, port closure is necessary to secure the incisions and prevent complications. The Port Closure Cobbler is designed to facilitate the closure of these port sites. Here are some key uses of the Laparoscopic Port Closure Cobbler:

1. Suture Placement: The Port Closure Cobbler is used to pass sutures through the layers of tissue surrounding the port site. It allows the surgeon to accurately place sutures in a controlled manner, ensuring proper closure of the incision.
2. Tissue Approximation: The instrument assists in bringing the tissue layers together for proper wound closure. It aids in the alignment and approximation of the different tissue layers, promoting effective healing and reducing the risk of herniation or other postoperative complications.
3. Knot Tying: The Port Closure Cobbler often incorporates mechanisms to facilitate knot tying. It assists in securely tying knots while maintaining tension on the suture, ensuring a secure closure of the incision.
4. Minimally Invasive Closure: The instrument is designed to be used in a minimally invasive manner, allowing for closure of the port sites through the small incisions used during laparoscopic surgery. This helps minimize trauma, promote faster recovery, and improve cosmetic outcomes.
5. Versatility: The Port Closure Cobbler is designed to be versatile and can be used for different port closure techniques and suture materials. It accommodates various needle sizes and suture types commonly used in laparoscopic port closure.

It's important to note that specific designs and variations of the Laparoscopic Port Closure Cobbler may exist, and the choice of instrument may depend on the surgeon's preference and the specific closure technique used. Surgeons and medical professionals receive specialized training in laparoscopic port closure techniques to ensure proper use of these instruments and optimal patient outcomes.

A laparoscopic liver retractor is a specialized instrument used during laparoscopic procedures to retract and expose the liver, allowing for better visualization and access to the surgical area. Here are some key uses of a laparoscopic liver retractor:

1. Liver Exposure: The primary purpose of a laparoscopic liver retractor is to provide optimal exposure of the liver during surgery. By retracting the liver away from the surgical field, it allows the surgeon to visualize and access the target area more easily.
2. Surgical Access: The retractor aids in creating a working space within the abdominal cavity, facilitating the surgical procedure. It helps create a clear and unobstructed view of the surgical site and allows the surgeon to maneuver other laparoscopic instruments more effectively.
3. Tissue Manipulation: In addition to liver retraction, the instrument can be used to manipulate surrounding tissues and structures to optimize exposure. It may be used to hold and retract the diaphragm, adjacent organs, or any other anatomical structures that impede visualization or access to the liver.
4. Stability and Fixation: The liver retractor provides stability and fixation of the liver during surgery. It helps prevent unintentional movement or displacement of the liver, reducing the risk of complications and ensuring the safety of the procedure.
5. Patient Safety: The use of a laparoscopic liver retractor is aimed at minimizing trauma and injury to the patient. It allows for a controlled and gentle retraction of the liver, reducing the risk of damage to the liver or surrounding structures.

It's important to note that specific designs and variations of laparoscopic liver retractors may exist, and the choice of instrument may depend on the surgeon's preference and the specific procedure being performed. Surgeons and medical professionals receive specialized training in laparoscopic liver surgery techniques and the use of retractors to ensure safe and effective outcomes.

VSC Cystoscope Bridge Double Channel

VSC The double channel feature of the cystoscope bridge refers to the presence of two separate channels within the bridge. These channels allow the passage of instruments or fluids, enhancing the capabilities of the cystoscope. The channels can be used for various purposes, such as irrigation, suction, or the introduction of additional diagnostic or therapeutic instruments.

The cystoscope bridge is used to maintain stability and alignment between the cystoscope and the additional instruments or accessories being used. It provides a platform for seamless instrument exchange and allows for efficient maneuverability within the bladder and urethra during the procedure.

The use of a cystoscope bridge with double channel can aid in performing various cystoscopic procedures, including biopsies, stone removal, stent placement, and laser or electrocautery treatments.

It's important to note that the specific configuration and features of the cystoscope bridge with double channel may vary depending on the manufacturer and the intended use. Surgeons and healthcare professionals receive specific training on the proper use of cystoscopy instruments and accessories to ensure safe and effective procedures.

A cystoscope with a single-channel bridge is a specialized instrument used for diagnostic and therapeutic procedures in urology. Here are some key uses and features of a cystoscope with a single-channel bridge:

1. Urinary Tract Visualization: The cystoscope is inserted through the urethra into the urinary tract, allowing direct visualization of the bladder, urethra, and other structures within the urinary system. The single-channel bridge design incorporates an additional channel that facilitates the passage of instruments or fluids.
2. Diagnostic Procedures: The cystoscope enables the urologist to visually inspect the bladder and identify any abnormalities, such as tumors, stones, or inflammation. It can also be used to obtain biopsies or collect tissue samples for further analysis.
3. Therapeutic Procedures: The single-channel bridge in the cystoscope allows for the introduction of specialized instruments for therapeutic interventions. For example, it can be used to perform procedures such as bladder tumor resection, stone fragmentation, or the placement of ureteral stents.
4. Irrigation and Fluid Management: The additional channel provided by the single-channel bridge allows for the introduction of irrigation fluids to maintain a clear field of view and enhance visualization during the procedure. It also facilitates the removal of fluids or debris from the urinary tract.
5. Instrument Passage: The single-channel bridge in the cystoscope provides a pathway for the introduction of various instruments, such as biopsy forceps, laser fibers, or other devices required for therapeutic interventions. This allows the urologist to perform procedures directly through the cystoscope without the need for additional incisions.
6. Patient Comfort: The cystoscope with a single-channel bridge is designed to minimize patient discomfort during the procedure. The instrument's smooth surface and appropriate sizing help reduce friction and irritation within the urinary tract.

It's important to note that the specific uses and features of a cystoscope with a single-channel bridge may vary depending on the manufacturer and model. Urologists and medical professionals receive specialized training in the use of cystoscopes and associated procedures to ensure safe and effective outcomes for patients.

Laparoscopic Advance Bipolar Shear Vessel Sealer Cutter With Cable 5mm Surgical Instruments

The Laparoscopic Excalibur Vessel Sealer Cutter is a surgical instrument used in minimally invasive surgery to seal and cut blood vessels and other tissue during surgical procedures. It is designed to provide reliable and efficient vessel sealing, which can help reduce blood loss and improve surgical outcomes.

Here are some general features and uses of the Laparoscopic Excalibur Vessel Sealer Cutter:

Bipolar energy: The instrument uses bipolar energy to seal blood vessels and other tissue. This means that it has two electrodes that are located at the tips of the instrument, and they are used to deliver an electrical current that coagulates and seals the tissue.

Curved jaw design: The Excalibur Vessel Sealer Cutter has a curved jaw design that allows for easy access and manipulation of tissue in tight spaces.

Simultaneous sealing and cutting: The Excalibur Vessel Sealer Cutter can seal and cut tissue simultaneously, which can save time during surgery.

Integrated cutting blade: The instrument has an integrated cutting blade that allows for efficient cutting of tissue.

Reliable and efficient sealing: The Excalibur Vessel Sealer Cutter is designed to provide reliable and efficient vessel sealing, which can help reduce blood loss and improve surgical outcomes

The Endo Grasper single use instrument has application in a variety of gynecologic and general endoscopic procedures forgrasping and clamping of tissue and small tubular structures.

VSC Laparoscopic Clickline Curved Scissor Grasper 5 mm

We have all Grasper and Forceps of Clickine or Karl Storz type are available of all Laparoscopic, Gynaecologist, Urology and General Instruments

We have all Grasper and Forceps of Clickine or Karl Storz type are available of all Laparoscopic, Gynaecologist, Urology and General Instruments

During laparoscopic surgery, scissors are usedto cut a variety of tissue, including fibrotic or calcified tissue, sutures, and occasionally tissue containing staples. Disposable scissors may become dull and ineffective.

VSC Laparoscopic Curved Scissor New Design 5mm

We have all Grasper and Forceps of Clickine or Karl Storz type are available of all Laparoscopic, Gynaecologist, Urology and General Instruments

VSC Eletrosurgial unit For Vessel Sealer

Electrosurgery is usedroutinely in eye surgery to cut, coagulate, dissect, fulgurate, ablate and shrink tissue. High frequency (100 kilohertz to 5 megahertz), alternating electric current at various voltages (20010, 000 Volts) is passed through tissue to generate heat.

VSC Cautery Machine 400watt For Surgery

The electrocautery unit (Bovie, cautery, or electrosurgical unit) (Figure 23-35, A) uses high-frequency electrical energy to cut tissue or coagulate bleeding. The preferential conduction of electrical energy by blood vessels facilitates coagulation.

Laparoscopic clip applicators are designed meticulously to apply ligating metal clips during laparoscopic procedures. Double action clipping jaw designed to pick metal clips from its cartridge easily and to apply on blood vessels.

A laparoscopic monopolar cable is an essential component of a laparoscopic electrosurgical system used in minimally invasive surgical procedures. It is responsible for transmitting electrical energy from the electrosurgical generator to the laparoscopic instrument, typically a monopolar electrode or instrument, for cutting, coagulation, or tissue dissection. Here are the primary uses of a laparoscopic monopolar cable:

1. Electrosurgery: Laparoscopic monopolar cables are used to deliver electrical energy to monopolar instruments, such as monopolar scissors, monopolar graspers, or monopolar cautery devices. The electrical energy generated by the electrosurgical unit passes through the monopolar cable to the instrument's active electrode, allowing surgeons to cut or coagulate tissues.
2. Tissue Cutting: Monopolar cables are used to provide the necessary energy for tissue cutting during laparoscopic procedures. The electrical current passes through the monopolar electrode, generating heat that causes tissue vaporization or cutting.
3. Tissue Coagulation: Monopolar cables are also utilized for tissue coagulation during laparoscopic surgery. By adjusting the settings on the electrosurgical generator, the monopolar cable delivers the appropriate energy to the monopolar electrode, causing controlled heating of tissues to achieve hemostasis (control of bleeding).
4. Dissection and Tissue Manipulation: The monopolar cable enables surgeons to manipulate and dissect tissues during laparoscopic procedures. By using monopolar instruments connected to the cable, surgeons can precisely cut, dissect, and manipulate tissues to achieve the desired surgical objectives.

It's important to note that laparoscopic electrosurgery should be performed by trained surgeons who are familiar with the equipment and safety guidelines. Proper techniques and caution should be followed to minimize the risk of thermal injury to surrounding tissues. The specific settings and techniques for using a laparoscopic monopolar cable may vary depending on the surgical procedure and the surgeon's preferences.

Laparoscopic traumatic graspers are designed meticulously to hold, Grasp and manipulate delicate abdominal tissue during laparoscopic procedures. One of their main functions is to facilitate adequate access to the surgical site by holding tissue to clear off the operating field.