Our Products
We at Vishal steel design and manufacture a wide array high quality ASME/ANSI/DIN standard blind flanges in India. We offer blind flanges for standard size of Carbon Steel blind flanges and Stainless Steel blind flanges.
We are maintaing the stock of around 3000 ton ofblind flangesin , Dammam, Saudi Arabia to provide quick delivery in Gulf Countries(GCC) for ongoing projects, so we an deliver blind flanges with in a day as per requirements of our valued clients in Saudi Arabia & all Gulf countries at best price, bcz. there is no shipping cost for each material again n again, due to our ready stock of blind flanges in Saudi Arabia, our clients can visit our stockyard in Dammam, Saudi Arabia & can inspect the material before placing the order & within no time delivery can be scheduled, by having largest stockyard in Middle East ofblind flangesmakes us different from all other manufactures & stockiest of blind flanges in INDIA & Saudi Arabia, so we can provide blind flanges at less than 10% cost & fastest delivery, we also can provide used Threaded flanges or Screwed flanges in Saudi Arabia, Bahrain, Qatar, Yemen, Kuwait , UAE, Egypt, Turkey, Singapore, Malaysia, Iran, Iraq at almost half of the price, even our pre usedblind flangesalso tested & check before buyback, so theseblind flangescan be used even in Turnkey projects & in Different sectors like Oil & Gas, Petroleum, Chemical, Fertiliser, Construction, Dairy, Pharma etc.
Commonly referred as blanking flanges, Blind pipe flanges are widely used in high pressure applications. Blind flanges are generally used to seal the end of a piping system to prevent flow of liquids or gases. The use of blind flanges allows ease of access to a piping system once it has been closed.Our blind flanges are available with raised or RTJ faces and also with female threads. Blind flanges can be supplied with or without hub as per the customer requirements.
We are Experts in exporting blind flanges to over 45 countries including UAE, UK, Dubai, Iran, Iraq, Qatar, Bahrain, Oman, Yemen, Lebanon, Jordan, Saudi Arabia, Malaysia, Indonesia, Singapore, Australia, New Zealand, USA, Canada, Mexico, Brazi, Netherlands, Germany, Italy, Spain, Serbia, Kuwait, Peru, Nigeria, Poland, South Africa, Denmark, Turkey, Egypt, Venezuela, Kuwait, Madagascar, Angloa & Srilanka & are major Olet Fittings Suppliers in Saudi Arabia etc.we also supply Investment casting (IC) screwed or threaded fittings which can be produced and supplied in various shapes such as Elbow, Street Elbow, Tee, Reducing Tee, RTJ Union, SMS Union, Cross, Coupling, Half Coupling, Full Coupling, Round Cap, Hexagon Cap, Hexagon Bushing, Square Plug, Hexagon Plug, Nipple and Hexagon Nipple.
we also have our sales representatives to understand the requirements of our clients, we maintain ready stock ofstainless steel pipe fittings&stainless steel flanges, in Cities like Abu Dhabi, Riyadh, Manama, Muscat, Doha, Dubai, Damascus, Khartoum, Beirut, Jeddah, Aleppo, Alexandria, Algiers, Amman, Mosul, Cairo, Baghdad, Dammam, Casablanca, Basra, Mecca, Tripoli, Rabat, Sanaa, Arbil, Hilla, Port Said, Marrakech, Medina, Al Hudaydah, Omdurman, Damietta, Homs, Kafr Dawar, Benghazi, Fez, Bahri, Nouakchott, Sulaymaniyah, Safi, Zarqa, Oran, Kirkuk, Ismailia, Tunis, Agadir, Tangier, Sharjah, Shibin El Kom, Misratah, Matrah, Aden, Najaf, Karbala, Latakia, Sousse, Meknes, Gaza, Fallujah, Aswan, Kassala, Al-Ubayyid, Sohag, Kuala Lumpur, Penang, Kuching & many more
BLIND FLANGES, BL FORGED FLANGES PRODUCTION RANGESize:1/2 (15 NB) to 48 (1200NB)
Standards:ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Pressure Ratings:Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 PN6, PN10, PN16, PN25, PN40, PN64 etc.
Carbon Steel Blind Flanges:ASTM A105/A105N, A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2, A694 F42, F46, F48, F50, F52, F56, F60, F65, F70, A516.60, 65, 70 (Spectacle Blind Flange, Spacer Ring/Spade Flange), Steel RST37.2, C22.8
Stainless Steel Blind Flanges:ASTM A182 F202, F304/304L/304H, F316/316L, F316H, F316TI, F310, F321, F904L
Alloy Steel Blind Flanges: ASTM A182 F1, F5, F9, F11, F22, F91
Special Alloy Blind Flanges:Duplex, Super Duplex, Nickel Alloys
Flange Face Type:Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Coating/Surface Treatment:Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
Value Added Services:CNC Machining, Customised Flanges
We at Vishal steel design and manufacture a wide array high quality ASME/ANSI/DIN standard Lap Joint Flanges in India. We offer Lap Joint Flanges for standard size of Carbon Steel Lap Joint Flanges and Stainless Steel Lap Joint Flanges.
We are maintaing the stock of around 3000 ton ofLap Joint Flangesin , Dammam, Saudi Arabia to provide quick delivery in Gulf Countries(GCC) for ongoing projects, so we an deliver Lap Joint Flanges with in a day as per requirements of our valued clients in Saudi Arabia & all Gulf countries at best price, bcz. there is no shipping cost for each material again n again, due to our ready stock of Lap Joint Flanges in Saudi Arabia, our clients can visit our stockyard in Dammam, Saudi Arabia & can inspect the material before placing the order & within no time delivery can be scheduled, by having largest stockyard in Middle East ofLap Joint Flangesmakes us different from all other manufactures & stockiest of Lap Joint Flanges in INDIA & Saudi Arabia, so we can provide Lap Joint Flanges at less than 10% cost & fastest delivery, we also can provide used Threaded flanges or Screwed flanges in Saudi Arabia, Bahrain, Qatar, Yemen, Kuwait , UAE, Egypt, Turkey, Singapore, Malaysia, Iran, Iraq at almost half of the price, even our pre usedLap Joint Flangesalso tested & check before buyback, so theseLap Joint Flangescan be used even in Turnkey projects & in Different sectors like Oil & Gas, Petroleum, Chemical, Fertiliser, Construction, Dairy, Pharma etc.
Lap Joint Flanges are similar to other types of industrial flanges, but it does not have a raised face. Lap joint flanges are used in conjunction with a Lap Joint Stub End. The total initial cost of a lap joint flange along with a stub end is around one-third higher than that of comparable welding neck flanges. The pressure holding capacity of lap joint flanges is comparatively lower, and the fatigue life for the assembly is only one tenth that of welding neck flanges.The lap joint flange with the stub end assembly is normally used in piping systems which require regular dismantling for inspection and cleaning. These flanges slip over the pipe, and are not welded or otherwise fastened to it. Bolting pressure is transmitted to the gasket by the pressure of the flange against the back of the pipe lap (Stub End).
We are Experts in exporting Lap Joint Flanges to over 45 countries including UAE, UK, Dubai, Iran, Iraq, Qatar, Bahrain, Oman, Yemen, Lebanon, Jordan, Saudi Arabia, Malaysia, Indonesia, Singapore, Australia, New Zealand, USA, Canada, Mexico, Brazi, Netherlands, Germany, Italy, Spain, Serbia, Kuwait, Peru, Nigeria, Poland, South Africa, Denmark, Turkey, Egypt, Venezuela, Kuwait, Madagascar, Angloa & Srilanka & are major Olet Fittings Suppliers in Saudi Arabia etc.we also supply Investment casting (IC) screwed or threaded fittings which can be produced and supplied in various shapes such as Elbow, Street Elbow, Tee, Reducing Tee, RTJ Union, SMS Union, Cross, Coupling, Half Coupling, Full Coupling, Round Cap, Hexagon Cap, Hexagon Bushing, Square Plug, Hexagon Plug, Nipple and Hexagon Nipple.
LAP JOINT FLANGES, LJ FORGED FLANGES PRODUCTION RANGESize:1/2 (15 NB) to 48 (1200NB)
Standards:ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Pressure Ratings:Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 PN6, PN10, PN16, PN25, PN40, PN64 etc.
Carbon Steel Lap Joint Flanges:ASTM A105/A105N, A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2, A694 F42, F46, F48, F50, F52, F56, F60, F65, F70, A516.60, 65, 70 (Spectacle Blind Flange, Spacer Ring/Spade Flange), Steel RST37.2, C22.8
Stainless Steel Lap Joint Flanges:ASTM A182 F202, F304/304L/304H, F316/316L, F316H, F316TI, F310, F321, F904L
Alloy Steel Lap Joint Flanges:ASTM A182 F1, F5, F9, F11, F22, F91
Special Alloy Lap Joint Flanges:Duplex, Super Duplex, Nickel Alloys
Flange Face Type:Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Coating/Surface Treatment:Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
Value Added Services:CNC Machining, Customised Flanges
Size | 1/2″ (15 NB) to 48″ (1200NB) |
Standards | ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings |
Pressure Ratings | Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 | PN6, PN10, PN16, PN25, PN40, PN64 etc. |
Carbon Steel Lap Joint Flanges | ASTM A105/A105N, A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2, A694 F42, F46, F48, F50, F52, F56, F60, F65, F70, A516.60, 65, 70 (Spectacle Blind Flange, Spacer Ring/Spade Flange), Steel RST37.2, C22.8 |
Stainless Steel Lap Joint Flanges | ASTM A182 F202, F304/304L/304H, F316/316L, F316H, F316TI, F310, F321, F904L |
Alloy Steel Lap Joint Flanges | ASTM A182 F1, F5, F9, F11, F22, F91 |
Special Alloy Lap Joint Flanges | Duplex, Super Duplex, Nickel Alloys |
Flange Face Type | Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ) |
Coating/Surface Treatment | Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized |
Value Added Services | CNC Machining, Customised Flanges |
We at Vishal steel design and manufacture a wide array high quality ASME/ANSI/DIN standard Plate Flanges in India. We offer Plate Flanges for standard size of Carbon Steel Plate Flanges and Stainless Steel Plate Flanges.
We are maintaing the stock of around 3000 ton ofPlate Flangesin , Dammam, Saudi Arabia to provide quick delivery in Gulf Countries(GCC) for ongoing projects, so we an deliver Plate Flanges with in a day as per requirements of our valued clients in Saudi Arabia & all Gulf countries at best price, bcz. there is no shipping cost for each material again n again, due to our ready stock of Plate Flanges in Saudi Arabia, our clients can visit our stockyard in Dammam, Saudi Arabia & can inspect the material before placing the order & within no time delivery can be scheduled, by having largest stockyard in Middle East ofPlate Flangesmakes us different from all other manufactures & stockiest of Plate Flanges in INDIA & Saudi Arabia, so we can provide Plate Flanges at less than 10% cost & fastest delivery, we also can provide used Plate Flanges in Saudi Arabia, Bahrain, Qatar, Yemen, Kuwait , UAE, Egypt, Turkey, Singapore, Malaysia, Iran, Iraq at almost half of the price, even our pre usedPlate Flangesalso tested & check before buyback, so thesePlate Flangescan be used even in Turnkey projects & in Different sectors like Oil & Gas, Petroleum, Chemical, Fertiliser, Construction, Dairy, Pharma etc.
Stainless steel Plate Flanges are manufactured from plated produced in accordance to the ASTM A240 and ASME SA240 standards. Plate Flanges are widely accepted as an alternative to cast or forged flanges in low pressure applications because of the benefits listed below.
Advantages of Plate Flanges
Plate Flanges are most widely used in fuel and water pipelines, where two flange plates are bolted together with a gasket in between them. The flange plate will have bolt holes all around the perimeter and will be used to create junctions, tees and joints.
We are Experts in exporting Plate Flanges to over 45 countries including UAE, UK, Dubai, Iran, Iraq, Qatar, Bahrain, Oman, Yemen, Lebanon, Jordan, Saudi Arabia, Malaysia, Indonesia, Singapore, Australia, New Zealand, USA, Canada, Mexico, Brazi, Netherlands, Germany, Italy, Spain, Serbia, Kuwait, Peru, Nigeria, Poland, South Africa, Denmark, Turkey, Egypt, Venezuela, Kuwait, Madagascar, Angloa & Srilanka & are major Olet Fittings Suppliers in Saudi Arabia etc.we also supply Investment casting (IC) screwed or threaded fittings which can be produced and supplied in various shapes such as Elbow, Street Elbow, Tee, Reducing Tee, RTJ Union, SMS Union, Cross, Coupling, Half Coupling, Full Coupling, Round Cap, Hexagon Cap, Hexagon Bushing, Square Plug, Hexagon Plug, Nipple and Hexagon Nipple.
we also have our sales representatives to understand the requirements of our clients, we maintain ready stock ofstainless steel pipe fittings&stainless steel flanges, in Cities like Abu Dhabi, Riyadh, Manama, Muscat, Doha, Dubai, Damascus, Khartoum, Beirut, Jeddah, Aleppo, Alexandria, Algiers, Amman, Mosul, Cairo, Baghdad, Dammam, Casablanca, Basra, Mecca, Tripoli, Rabat, Sanaa, Arbil, Hilla, Port Said, Marrakech, Medina, Al Hudaydah, Omdurman, Damietta, Homs, Kafr Dawar, Benghazi, Fez, Bahri, Nouakchott, Sulaymaniyah, Safi, Zarqa, Oran, Kirkuk, Ismailia, Tunis, Agadir, Tangier, Sharjah, Shibin El Kom, Misratah, Matrah, Aden, Najaf, Karbala, Latakia, Sousse, Meknes, Gaza, Fallujah, Aswan, Kassala, Al-Ubayyid, Sohag, Kuala Lumpur, Penang, Kuching & many more
We at Vishal steel design and manufacture a wide array high quality ASME/ANSI/DIN standard Slip-on Pipe Flanges in India. We offer Slip-on Pipe Flanges for standard size of Carbon Steel Slip-on Pipe Flanges and Stainless Steel Slip-on Pipe Flanges.
We are maintaing the stock of around 3000 ton ofSlip-on pipe flangesin , Dammam, Saudi Arabia to provide quick delivery in Gulf Countries(GCC) for ongoing projects, so we an deliver Slip-on pipe flanges with in a day as per requirements of our valued clients in Saudi Arabia & all Gulf countries at best price, bcz. there is no shipping cost for each material again n again, due to our ready stock of Slip-on pipe flanges in Saudi Arabia, our clients can visit our stockyard in Dammam, Saudi Arabia & can inspect the material before placing the order & within no time delivery can be scheduled, by having largest stockyard in Middle East ofSlip-on pipe flangesmakes us different from all other manufactures & stockiest of Slip-on pipe flanges in INDIA & Saudi Arabia, so we can provide Slip-on pipe flanges at less than 10% cost & fastest delivery, we also can provide used Threaded flanges or Screwed flanges in Saudi Arabia, Bahrain, Qatar, Yemen, Kuwait , UAE, Egypt, Turkey, Singapore, Malaysia, Iran, Iraq at almost half of the price, even our pre usedSlip-on pipe flangesalso tested & check before buyback, so theseSlip-on pipe flangescan be used even in Turnkey projects & in Different sectors like Oil & Gas, Petroleum, Chemical, Fertiliser, Construction, Dairy, Pharma etc.
Slip-on pipe flange usually slips over the pipe. Slip-on pipe flanges are typically made with an inside diameter of the pipe flange slightly larger than the outside diameter of the pipe. This allows the slip-on flange to slip over the pipe. Slip-on pipe flanges are welded (usually both inside and outside) to provide strength and prevent leakage. Slip-on pipe flanges can sometimes also have a boss/ring or hub, and can be made with a bore to suit either pipe or tube. Ring pipe flanges and hub pipe flanges are both considered slip-on pipe flanges because they both slip over the pipe. Slip-on flanges are generally preferred by users over Slip-on Pipe Flanges, as they are a cheaper option than weld neck flange and the fact that less accuracy is required when cutting pipe to length. Slip-on flanges are available with raised, flat or RTJ faces, and are also available in orifice configurations.
We are Experts in exporting Slip-on pipe flanges to over 45 countries including UAE, UK, Dubai, Iran, Iraq, Qatar, Bahrain, Oman, Yemen, Lebanon, Jordan, Saudi Arabia, Malaysia, Indonesia, Singapore, Australia, New Zealand, USA, Canada, Mexico, Brazi, Netherlands, Germany, Italy, Spain, Serbia, Kuwait, Peru, Nigeria, Poland, South Africa, Denmark, Turkey, Egypt, Venezuela, Kuwait, Madagascar, Angloa & Srilanka & are major Olet Fittings Suppliers in Saudi Arabia etc.we also supply Investment casting (IC) screwed or threaded fittings which can be produced and supplied in various shapes such as Elbow, Street Elbow, Tee, Reducing Tee, RTJ Union, SMS Union, Cross, Coupling, Half Coupling, Full Coupling, Round Cap, Hexagon Cap, Hexagon Bushing, Square Plug, Hexagon Plug, Nipple and Hexagon Nipple.
We are Experts in exporting Slip-on pipe flanges to over 45 countries including UAE, UK, Dubai, Iran, Iraq, Qatar, Bahrain, Oman, Yemen, Lebanon, Jordan, Saudi Arabia, Malaysia, Indonesia, Singapore, Australia, New Zealand, USA, Canada, Mexico, Brazi, Netherlands, Germany, Italy, Spain, Serbia, Kuwait, Peru, Nigeria, Poland, South Africa, Denmark, Turkey, Egypt, Venezuela, Kuwait, Madagascar, Angloa & Srilanka & are major Olet Fittings Suppliers in Saudi Arabia etc.we also supply Investment casting (IC) screwed or threaded fittings which can be produced and supplied in various shapes such as Elbow, Street Elbow, Tee, Reducing Tee, RTJ Union, SMS Union, Cross, Coupling, Half Coupling, Full Coupling, Round Cap, Hexagon Cap, Hexagon Bushing, Square Plug, Hexagon Plug, Nipple and Hexagon Nipple.
We are Experts in exporting Slip-on pipe flanges to over 45 countries including UAE, UK, Dubai, Iran, Iraq, Qatar, Bahrain, Oman, Yemen, Lebanon, Jordan, Saudi Arabia, Malaysia, Indonesia, Singapore, Australia, New Zealand, USA, Canada, Mexico, Brazi, Netherlands, Germany, Italy, Spain, Serbia, Kuwait, Peru, Nigeria, Poland, South Africa, Denmark, Turkey, Egypt, Venezuela, Kuwait, Madagascar, Angloa & Srilanka & are major Olet Fittings Suppliers in Saudi Arabia etc.we also supply Investment casting (IC) screwed or threaded fittings which can be produced and supplied in various shapes such as Elbow, Street Elbow, Tee, Reducing Tee, RTJ Union, SMS Union, Cross, Coupling, Half Coupling, Full Coupling, Round Cap, Hexagon Cap, Hexagon Bushing, Square Plug, Hexagon Plug, Nipple and Hexagon Nipple.
SLIP-ON FLANGE, SO FORGED FLANGES PRODUCTION RANGESize:1/2 (15 NB) to 48 (1200NB)
Standards:ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Pressure Ratings:Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 PN6, PN10, PN16, PN25, PN40, PN64 etc.
Carbon Steel Slip-on Flanges:ASTM A105/A105N, A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2, A694 F42, F46, F48, F50, F52, F56, F60, F65, F70, A516.60, 65, 70 (Spectacle Blind Flange, Spacer Ring/Spade Flange), Steel RST37.2, C22.8
Stainless Steel Slip-on Flanges:ASTM A182 F202, F304/304L/304H, F316/316L, F316H, F316TI, F310, F321, F904L
Alloy Steel Slip-on Flanges:ASTM A182 F1, F5, F9, F11, F22, F91
Special Alloy Slip-on Flanges:Duplex, Super Duplex, Nickel Alloys
Flange Face Type:Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Coating/Surface Treatment:Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
Value Added Services:CNC Machining, Customised Flanges
We at Vishal steel design and manufacture a wide array high quality ASME/ANSI/DIN standard Socket weld flanges in India. We offer Socket weld flanges for standard size of Carbon Steel Socket weld flanges and Stainless Steel Socket weld flanges.
We are maintaing the stock of around 3000 ton ofSocket weld flangesin , Dammam, Saudi Arabia to provide quick delivery in Gulf Countries(GCC) for ongoing projects, so we an deliver Socket weld flanges with in a day as per requirements of our valued clients in Saudi Arabia & all Gulf countries at best price, bcz. there is no shipping cost for each material again n again, due to our ready stock of Socket weld flanges in Saudi Arabia, our clients can visit our stockyard in Dammam, Saudi Arabia & can inspect the material before placing the order & within no time delivery can be scheduled, by having largest stockyard in Middle East ofSocket weld flangesmakes us different from all other manufactures & stockiest of Socket weld flanges in INDIA & Saudi Arabia, so we can provide Socket weld flanges at less than 10% cost & fastest delivery, we also can provide used Threaded flanges or Screwed flanges in Saudi Arabia, Bahrain, Qatar, Yemen, Kuwait , UAE, Egypt, Turkey, Singapore, Malaysia, Iran, Iraq at almost half of the price, even our pre usedSocket weld flangesalso tested & check before buyback, so theseSocket weld flangescan be used even in Turnkey projects & in Different sectors like Oil & Gas, Petroleum, Chemical, Fertiliser, Construction, Dairy, Pharma etc.
Socket weld flange is similar to the slip-on flange in outline, but the bore is counter-bored to accept pipe. Socket welding pipe flanges are typically used on smaller sizes of high pressure pipes. Socket weld flanges are widely used in high pressure systems such as hydraulic equipment and steam lines. Socket weld pipe flanges are attached by inserting the pipe into the socket end and then applying fillet weld around the hub of the flange. This allows for a smooth bore and better flow of the fluid or gas inside of the pipe. An optional internal weld may be applied in high stress applications.
We are Experts in exporting Socket weld flanges to over 45 countries including UAE, UK, Dubai, Iran, Iraq, Qatar, Bahrain, Oman, Yemen, Lebanon, Jordan, Saudi Arabia, Malaysia, Indonesia, Singapore, Australia, New Zealand, USA, Canada, Mexico, Brazi, Netherlands, Germany, Italy, Spain, Serbia, Kuwait, Peru, Nigeria, Poland, South Africa, Denmark, Turkey, Egypt, Venezuela, Kuwait, Madagascar, Angloa & Srilanka & are major Olet Fittings Suppliers in Saudi Arabia etc.we also supply Investment casting (IC) screwed or threaded fittings which can be produced and supplied in various shapes such as Elbow, Street Elbow, Tee, Reducing Tee, RTJ Union, SMS Union, Cross, Coupling, Half Coupling, Full Coupling, Round Cap, Hexagon Cap, Hexagon Bushing, Square Plug, Hexagon Plug, Nipple and Hexagon Nipple.
we also have our sales representatives to understand the requirements of our clients, we maintain ready stock ofstainless steel pipe fittings&stainless steel flanges, in Cities like Abu Dhabi, Riyadh, Manama, Muscat, Doha, Dubai, Damascus, Khartoum, Beirut, Jeddah, Aleppo, Alexandria, Algiers, Amman, Mosul, Cairo, Baghdad, Dammam, Casablanca, Basra, Mecca, Tripoli, Rabat, Sanaa, Arbil, Hilla, Port Said, Marrakech, Medina, Al Hudaydah, Omdurman, Damietta, Homs, Kafr Dawar, Benghazi, Fez, Bahri, Nouakchott, Sulaymaniyah, Safi, Zarqa, Oran, Kirkuk, Ismailia, Tunis, Agadir, Tangier, Sharjah, Shibin El Kom, Misratah, Matrah, Aden, Najaf, Karbala, Latakia, Sousse, Meknes, Gaza, Fallujah, Aswan, Kassala, Al-Ubayyid, Sohag, Kuala Lumpur, Penang, Kuching & many more
SOCKET WELDING FLANGE, SW FORGED FLANGES, SOCKET WELD FLANGE PRODUCTION RANGESize:1/2 (15 NB) to 48 (1200NB)
Standards:ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Pressure Ratings:Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 PN6, PN10, PN16, PN25, PN40, PN64 etc.
Carbon Steel Socket Welding Flanges:ASTM A105/A105N, A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2, A694 F42, F46, F48, F50, F52, F56, F60, F65, F70, A516.60, 65, 70 (Spectacle Blind Flange, Spacer Ring/Spade Flange), Steel RST37.2, C22.8
Stainless Steel Socket Welding Flanges:ASTM A182 F202, F304/304L/304H, F316/316L, F316H, F316TI, F310, F321, F904L
Alloy Steel Socket Welding Flanges:ASTM A182 F1, F5, F9, F11, F22, F91
Special Alloy Socket Welding Flanges:Duplex, Super Duplex, Nickel Alloys
Flange Face Type:Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Coating/Surface Treatment:Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
Value Added Services:CNC Machining, Customised Flanges
We at Vishal steel design and manufacture a wide array high quality ASME/ANSI/DIN standard Weld Neck Flanges in India. We offer Weld Neck Flanges for standard size of Carbon Steel Weld Neck Flanges and Stainless Steel Weld Neck Flanges.
We are maintaing the stock of around 3000 ton ofWeld neck pipe flangesin , Dammam, Saudi Arabia to provide quick delivery in Gulf Countries(GCC) for ongoing projects, so we an deliver Weld neck pipe flanges with in a day as per requirements of our valued clients in Saudi Arabia & all Gulf countries at best price, bcz. there is no shipping cost for each material again n again, due to our ready stock of Weld neck pipe flanges in Saudi Arabia, our clients can visit our stockyard in Dammam, Saudi Arabia & can inspect the material before placing the order & within no time delivery can be scheduled, by having largest stockyard in Middle East ofWeld neck pipe flangesmakes us different from all other manufactures & stockiest of Weld neck pipe flanges in INDIA & Saudi Arabia, so we can provide Weld neck pipe flanges at less than 10% cost & fastest delivery, we also can provide used Threaded flanges or Screwed flanges in Saudi Arabia, Bahrain, Qatar, Yemen, Kuwait , UAE, Egypt, Turkey, Singapore, Malaysia, Iran, Iraq at almost half of the price, even our pre usedWeld neck pipe flangesalso tested & check before buyback, so theseWeld neck pipe flangescan be used even in Turnkey projects & in Different sectors like Oil & Gas, Petroleum, Chemical, Fertiliser, Construction, Dairy, Pharma etc.
Weld neck pipe flanges are connected to the pipe by welding the pipe to the neck of the pipe flange, which helps to pass on the stress from the weld neck to the pipe itself. This also reduces high stress concentration at the base of the hub of the weld neck pipe flanges. Weld neck pipe flanges are generally used in high pressure applications, where hot or cold temperatures exist. The inside diameter of a weld neck pipe flange is machined to match the inside diameter of the pipe.
We are Experts in exporting Weld neck pipe flanges to over 45 countries including UAE, UK, Dubai, Iran, Iraq, Qatar, Bahrain, Oman, Yemen, Lebanon, Jordan, Saudi Arabia, Malaysia, Indonesia, Singapore, Australia, New Zealand, USA, Canada, Mexico, Brazi, Netherlands, Germany, Italy, Spain, Serbia, Kuwait, Peru, Nigeria, Poland, South Africa, Denmark, Turkey, Egypt, Venezuela, Kuwait, Madagascar, Angloa & Srilanka & are major Olet Fittings Suppliers in Saudi Arabia etc.we also supply Investment casting (IC) screwed or threaded fittings which can be produced and supplied in various shapes such as Elbow, Street Elbow, Tee, Reducing Tee, RTJ Union, SMS Union, Cross, Coupling, Half Coupling, Full Coupling, Round Cap, Hexagon Cap, Hexagon Bushing, Square Plug, Hexagon Plug, Nipple and Hexagon Nipple.
we also have our sales representatives to understand the requirements of our clients, we maintain ready stock ofstainless steel pipe fittings&stainless steel flanges, in Cities like Abu Dhabi, Riyadh, Manama, Muscat, Doha, Dubai, Damascus, Khartoum, Beirut, Jeddah, Aleppo, Alexandria, Algiers, Amman, Mosul, Cairo, Baghdad, Dammam, Casablanca, Basra, Mecca, Tripoli, Rabat, Sanaa, Arbil, Hilla, Port Said, Marrakech, Medina, Al Hudaydah, Omdurman, Damietta, Homs, Kafr Dawar, Benghazi, Fez, Bahri, Nouakchott, Sulaymaniyah, Safi, Zarqa, Oran, Kirkuk, Ismailia, Tunis, Agadir, Tangier, Sharjah, Shibin El Kom, Misratah, Matrah, Aden, Najaf, Karbala, Latakia, Sousse, Meknes, Gaza, Fallujah, Aswan, Kassala, Al-Ubayyid, Sohag, Kuala Lumpur, Penang, Kuching & many more
Welding Neck Flange, WN Forged Flanges, Weld Neck Flanges Production RangeSize:1/2 (15 NB) to 48 (1200NB)
Standards:ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Pressure Ratings:Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 PN6, PN10, PN16, PN25, PN40, PN64 etc.
Carbon Steel Weld Neck Flanges:ASTM A105/A105N, A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2, A694 F42, F46, F48, F50, F52, F56, F60, F65, F70, A516.60, 65, 70 (Spectacle Blind Flange, Spacer Ring/Spade Flange), Steel RST37.2, C22.8
Stainless Steel Weld Neck Flanges:ASTM A182 F202, F304/304L/304H, F316/316L, F316H, F316TI, F310, F321, F904L
Alloy Steel Weld Neck Flanges:ASTM A182 F1, F5, F9, F11, F22, F91
Special Alloy Weld Neck Flanges:Duplex, Super Duplex, Nickel Alloys
Flange Face Type:Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Coating/Surface Treatment:Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
Value Added Services:CNC Machining, Customised Flanges
We at Vishal steel design and manufacture a wide array high quality ASME/ANSI/DIN standard threaded flanges or screwed flanges in India. We offer threaded flanges for standard size of carbon steel threaded flanges and stainless steel threaded flanges.
We are maintaing the stock of around 3000 ton ofstainless Threaded flangesor Screwed flangesin , Dammam, Saudi Arabia to provide quick delivery in Gulf Countries(GCC) for ongoing projects, so we an deliver stainless Threaded flanges or Screwed flanges with in a day as per requirements of our valued clients in Saudi Arabia & all Gulf countries at best price, bcz. there is no shipping cost for each material again n again, due to our ready stock of stainless Threaded flanges or Screwed flanges in Saudi Arabia, our clients can visit our stockyard in Dammam, Saudi Arabia & can inspect the material before placing the order & within no time delivery can be scheduled, by having largest stockyard in Middle East ofstainless Threaded flangesor Screwed flanges makes us different from all other manufactures & stockiest of stainless Threaded flanges or Screwed flanges in INDIA & Saudi Arabia, so we can provide stainless Threaded flanges or Screwed flanges at less than 10% cost & fastest delivery, we also can provide used Threaded flanges or Screwed flanges in Saudi Arabia, Bahrain, Qatar, Yemen, Kuwait , UAE, Egypt, Turkey, Singapore, Malaysia, Iran, Iraq at almost half of the price, even our pre usedstainless Threaded flangesor Screwed flangesalso tested & check before buyback, so thesestainless Threaded flangesor Screwed flanges can be used even in Turnkey projects & in Different sectors like Oil & Gas, Petroleum, Chemical, Fertiliser, Construction, Dairy, Pharma etc.
Threaded flanges are widely used in low pressure piping systems, as no welding is involved while connecting the flanges to pipes or other equipment. However, the flange may be welded around the joint after assembly, but it is not considered a satisfactory method of increasing its applications. Threaded flanges are also known as screwed flanges and are similar to slip-on flanges, but the bore is threaded to enable assembling without welding. Threaded pipe flanges are usually used with pipes that have external threads.
We are Experts in exporting Threaded flanges, Screwed flanges or threaded fittings to over 45 countries including UAE, UK, Dubai, Iran, Iraq, Qatar, Bahrain, Oman, Yemen, Lebanon, Jordan, Saudi Arabia, Malaysia, Indonesia, Singapore, Australia, New Zealand, USA, Canada, Mexico, Brazi, Netherlands, Germany, Italy, Spain, Serbia, Kuwait, Peru, Nigeria, Poland, South Africa, Denmark, Turkey, Egypt, Venezuela, Kuwait, Madagascar, Angloa & Srilanka & are major Olet Fittings Suppliers in Saudi Arabia etc.we also supply Investment casting (IC) screwed or threaded fittings which can be produced and supplied in various shapes such as Elbow, Street Elbow, Tee, Reducing Tee, RTJ Union, SMS Union, Cross, Coupling, Half Coupling, Full Coupling, Round Cap, Hexagon Cap, Hexagon Bushing, Square Plug, Hexagon Plug, Nipple and Hexagon Nipple.
we also have our sales representatives to understand the requirements of our clients, we maintain ready stock ofstainless steel pipe fittings&stainless steel flanges, in Cities like Abu Dhabi, Riyadh, Manama, Muscat, Doha, Dubai, Damascus, Khartoum, Beirut, Jeddah, Aleppo, Alexandria, Algiers, Amman, Mosul, Cairo, Baghdad, Dammam, Casablanca, Basra, Mecca, Tripoli, Rabat, Sanaa, Arbil, Hilla, Port Said, Marrakech, Medina, Al Hudaydah, Omdurman, Damietta, Homs, Kafr Dawar, Benghazi, Fez, Bahri, Nouakchott, Sulaymaniyah, Safi, Zarqa, Oran, Kirkuk, Ismailia, Tunis, Agadir, Tangier, Sharjah, Shibin El Kom, Misratah, Matrah, Aden, Najaf, Karbala, Latakia, Sousse, Meknes, Gaza, Fallujah, Aswan, Kassala, Al-Ubayyid, Sohag, Kuala Lumpur, Penang, Kuching & many more
Threaded Flange, Threaded Forged Flanges, Screwed Flanges Production RangeSize:1/2 (15 NB) to 48 (1200NB)
Standards:ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Pressure Ratings:Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 PN6, PN10, PN16, PN25, PN40, PN64 etc.
Carbon Steel Threaded Flanges:ASTM A105/A105N, A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2, A694 F42, F46, F48, F50, F52, F56, F60, F65, F70, A516.60, 65, 70 (Spectacle Blind Flange, Spacer Ring/Spade Flange), Steel RST37.2, C22.8
Stainless Steel Threaded Flanges:ASTM A182 F202, F304/304L/304H, F316/316L, F316H, F316TI, F310, F321, F904L
Alloy Steel Threaded Flanges:ASTM A182 F1, F5, F9, F11, F22, F91
Special Alloy Threaded Flanges:Duplex, Super Duplex, Nickel Alloys
Flange Face Type:Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Coating/Surface Treatment:Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
Value Added Services:CNC Machining, Customised Flanges