Visaman Sales

Sorthiyawadi, Rajkot, Gujarat

Size:
RHS2015-300250
Thinkness:1.0 mm to 8.0 mm
Lenth:3.0 mtr to 12.0 mtr

• S/U
• Mechinery
• Automotive
• Furniture
• Storage System
• Transmission Tower

• Is4923:1997
• EN1029-1:2006
• ASTM A-500

• Visual and Dimensional Inspection
• Tensile Test
• Flatting and Flaring Test
• Impact Test
• Chemical Analysis
• Plain End-square Cut
• Cut Length

• Black(Self Coloured uncoated)
• Outside Protective Coating-oil/Varnish
• Hot Dip Galvanized
• Pre-Galvanized

GRADES :-

Common Grades:IS 2062/1999
Structuralsare also available in the followingforeign specificationsASTM-A-36, JIS-G-3101-SS400, BS-4360 Grades 40A, 43A, 43B, 43C, 50B, 50C, EN-10025, Grades S-275 JO, JR, S-355 JO, JR, DIN-17100 ST 37.2/44.2

Rolling Tolerances:-

Web:-up to 200 mm 2.5 mmabove 200 mm 3 mm
Flange :- upto 100 mm 2 mm
Sectional weight:- 2.5 %
Length:-For fixed length : 100 mm

75 x 40mm to 200 x 75mm (Light Wt. /Med. Wt. /STD .Wt. )

Application :

-truck-trailers,

-Tippers, -generators frames, -EOT cranes, -ship building, -factory sheds,

-conveyors, Cable Trays, boilers, agricultural equipment, Bus body, Mechanised parking system, construction of bridges and many more engineering industries.

Sectional Properties as per:-For Beams :- DIN :1025 1994 / IS :12778 1989 / IS :808 1989
Tolerance as per:-For Beams :- DIN :1025 1994 / IS :12779 -1989 / IS :1852 1985
Grades as per:-For Beams :- IS :2062 :E250 A 2006

It is represented by dimensions of Web & Flange. For e.g. 15075 beam means, Width of Web = 150mmWidth of Flange = 75mm

TMT Bar:
We sale all type of TMT bar from 8mm to 32 mm diameter from primary and secondary producer.
Reinforcement bars are used generally in construction projects.
Basically there are 3 Qualities in bars:-
1) CTD :- Cold Twisted Deformed Bars
2) TOR :- Tor 40
3) TMT :- Thermo-Mechanically Treated Bars
CTD & TOR-40:
TMT Bars:
Representation of TMT bars is done by its diameter.
For e.g.: 8mm TMT bar means diameter of that bar is 8mm.
Sizes:-
Following are the sizes available in Reinforcement bars:
Diameter (in mm): 8, 10, 12, 16, 18, 20, 25, 28, 32, 40, 45.

Excellent resistance to high pressure and low/high temperature

• Highly normalized & tempered
• Sturdy construction
• High tolerances
• Smooth inner surface for increased fluid flow

Length:-Uniform 12 meters, can also be supplied in 9/12 meters on mutual agreement

Tolerance as per:-IS : 1786 2008

Note: Sizes 8, 10 and 12 mm are not regularly rolled in Fe 550 Grades

Special Features:

• Low carbon content and made from fully killed steel.
• Higher yield strength, Ultimate tensile strength and higher percentage elongation when compared tocold twisted bars of same grade.
• Easy bendability, weldability and excellent ductility ensures economy and safety of use.
• In-built ability to resist loss of strength at higher temperature.
• Require less energy for bending and re-bending along with superior reverse bending properties.
• Can be butt welded or lap-welded.
• Use of Fe-500 grade results in saving more than 15% in steel consumption when compared to coldtwisted bars.
• Higher corrosion resistance and seismic resistance compared to CTD.
• Ideally suited for any type of concrete structure.

Packing :Bare, in strapped bundles / piles weighing 7 to 8 metric tonnes approximately.
Invoicing :As per actual weight.
Quantity & Shipment Quantity & Shipment :On mutually agreed terms.

Outside Diameter:21.3mm-355.6mm
Thinkness range:07mm-8.0mm
Lenth:3.0 meter to 12.0 meter

• Liqid Transmission
• Idlers
• Mechanical & General Engineering
• Structural
• Water and Sewage
• Water Welles
• Fire proction
• Fencing & many more

• ISL1239(Part-1)/2004, BS:1387-1990
• DIN 2039, DIN 2440, DIN 2441, DIN 2444
• EN10255:2004, EN10240:1998
• IS:9295-1983
• IS:3601-1984
• IS:1161-1998
• IS:3589/2001
• IS:4270:2001
• ASTM A-53 GR A&B SCH 20/40/80
• ASTM A-795
• ASTM A-135

• Hydrostatic Test
• Eddy Current Test
• Flattening/Flaring Test/bend Test
• Bend Test
• Chemical Analysis
• Other Tests As Required By the Standard

• Plain End
• Threaded and Coupled
• Grooved
• Cut Lengths

• Black(Self Coloured uncoated)
• Outside Protective Coating-oil/Varnish
• Hot Dip Galvanized
• Pre-Galvanized

Width:-up to 50 mm: 1 mm50 mm to 75 mm: 1.5 mm75 mm to 100 mm: 2 mm100 mm and above 2%and maximum not exceding 6 mm

Thickness:-up to 12 mm: 0.5 mmover 12 mm: 4% and max not exceeding 1.5 mm

Sectional weight:-Up to 3 mm thick: +5/-3%Over 3 mm : 5%

Length:-For fixed length : 100 mm

Size:
SHS2020-275-275
Thinkness:1.0 mm to 8.0 mm
Lenth:3.0 mtr to 12.0 mtr

• S/U
• Mechinery
• Automotive
• Furniture
• Storage System
• Transmission Tower

• Is4923:1997
• EN1029-1:2006
• ASTM A-500

• Visual and Dimensional Inspection
• Tensile Test
• Flatting and Flaring Test
• Impact Test
• Chemical Analysis
• Plain End-square Cut
• Cut Length

• Black(Self Coloured uncoated)
• Outside Protective Coating-oil/Varnish
• Hot Dip Galvanized
• Pre-Galvanized