GST : 24ACXPP0949A1ZH
Verified
Write a Review
Our Products
Material Handling Machines & Systems
2 Products availableWe offer the best product range of 36 X 24 Jaw Crusher, 30 X15 Jaw Crusher, 30 X 20 Jaw Crusher, Jaw Crusher and King Stone Crushers.
We are a well- recognized Manufacturer, Exporter and Supplier of 36 X 24 Jaw Crusher. Our Jaw Crusher is fabricated from premium components, and is tested at varied quality parameters. That's why it gives flawless performance.
Specifications
| Make | Virat |
|---|---|
| Size of Crusher | 36" x 24" (900 x 600 mm) |
| Type of the Crusher | Double Toggle, Oil Lubricated |
| Material to be crushed | Crushed Stone (Screened) |
| Bulk density | 1.4 T/ M3 |
| Input lump size | - 500 mm (20") |
| Expected product size | +40mm to -80mm (25%) -40mm to +20mm (35%) -20mm to +5mm (30 to 35%) -5mm (8 to 10%) |
| Capacity | 75 TPH |
| Recommended gap setting for above product size | 60 mm (approx.) |
| Main Bearing for Eccentric Shaft | Spherical Roller |
| Hinge Bearing | Spherical Roller |
| Fly Wheel RPM | Between 300-325 rpm |
| Gap Adjustment | Steel flats of various thickness, provided to adjust the gap by stationary jaw setting. |
| Lubrication | Suitable oil lubrication system is provided. Oil tank is mounted outside the body to save costly oil during breakage of Rubber Diaphragm. Oil pump is coupled directly on the Essentric shaft. |
| Drive | Through V-Belts |
| Recommended Drive Motor | 75 HP 1440 rpm TEFC Sq.cage. |
| Weight of Machine | 20 T approx. |
Material Of Construction
| Main Body | Heavy duty, robust construction, M.S. Fabricated, Heat treatment process. |
|---|---|
| Swing / Stationery Jaw | Steel Casting (IS:1030) |
| Jaw Plates | Mn. Steel Casting (IS:276) |
| Toggles | Steel Casting (IS:1030) |
| Pitman | Steel Casting (IS:1030) |
| Shaft | Forged Steel C-45 (IS:1570) |
| Hinge Pin | Forged Steel C-45 (IS:1570) |
| Machine Pulley | Cast iron, flat type with safety Mechanism (IS:210) |
Specifications
| Make | Virat |
|---|---|
| Size of Crusher | 30" x 15" (750 x 375 mm) |
| Type of the Crusher | Double Toggle, Oil Lubricated |
| Material to be crushed | Black strap stones |
| Bulk density | 1.4 T / M3 |
| Input lump size | - 300 mm (12") |
| Expected product size with low Eccentric Shaft -(5mm) | + 40 mm - (45 to 50 %). - 40 mm + 20 mm - (32 to 35 %). +5 mm - 20 mm - (15 to 18 %) below 5 mm - (10 to 12 %) |
| Capacity | 45 to 50 TPH |
| Recommended gap setting for above product size | 62 mm (approx.) |
| Main Bearing for Eccentric Shaft | Spherical Roller |
| Hinge Bearing | Spherical Roller |
| Fly Wheel RPM | Around 350 rpm approx. |
| Gap Adjustment | Steel flats of various thickness, provided to adjust the gap by stationary jaw setting. |
| Lubrication | Suitable oil lubrication system is provided. Oil tank is mounted outside the body to save costly oil during breakage of Rubber Diaphragm. Oil pump is coupled directly on the Essentric shaft. |
| Drive | Through V-Belts |
| Recommended Drive Motor | 40 HP 1440 rpm TEFC Sq.cage. |
| Weight of Machine | 8T approx. |
Material Of Construction
| Main Body | Heavy duty, robust construction, M.S.Fabricated, Heat treatment process. |
|---|---|
| Swing / Stationery Jaw | Steel Casting(IS:1030) |
| Jaw Plates | Mn. Steel Casting (IS:276) |
| Toggles | Steel Casting (IS:1030) |
| Pitman | Steel Casting (IS:1030) |
| Shaft | Forged Steel C-45 (IS:1570) |
| Hinge Pin | Forged Steel C-45 |
| Machine Pulley | Cast iron, flat type with safety Mechanism (IS:210) |
We are instrumental in providing the clients with 30 x 20 Jaw Crusher. Our Jaw Crusher is made at par with the industry standards. It is mainly acclaimed for its high efficiency and long service life.
Specifications
| Make | Virat |
|---|---|
| Size of Crusher | 30" x 20" (750 x 500 mm) |
| Type of the Crusher | Double Toggle, Oil Lubricated |
| Material to be crushed | Black strap stones |
| Bulk density | 1.4 T / M3 |
| Input lump size | - 300 mm (17") |
| Expected product size with low Eccentric Shaft -(5mm) | + 40 mm - (45 to 50 %) - 40 mm + 20 mm - (32 to 35 %) +5 mm - 20 mm - (15 to 18 %) below 5 mm - (10 to 12 %) |
| Capacity | 60 TPH |
| Recommended gap setting for above product size | 62 mm (approx.) |
| Main Bearing for Eccentric Shaft | Spherical Roller |
| Hinge Bearing | Spherical Roller |
| Fly Wheel RPM | Around 350 rpm approx. |
| Gap Adjustment | Steel flats of various thickness, provided to adjust the gap by stationary jaw setting. |
| Lubrication | Suitable oil lubrication system is provided. Oil tank is mounted outside the body to save costly oil during breakage of Rubber Diaphragm. Oil pump is coupled directly on the Essentric shaft |
| Drive | Through V-Belts |
| Recommended Drive Motor | 50 HP 1440 rpm TEFC Sq.cage |
| Weight of Machine | 8.7 T approx. |
Material Of Construction
| Main Body | Heavy duty, robust construction, M.S.Fabricated, Heat treatment process. |
|---|---|
| Swing / Stationery Jaw | Steel Casting (IS:1030) |
| Jaw Plates | Mn. Steel Casting (IS:276) |
| Toggles | Steel Casting (IS:1030) |
| Pitman | Steel Casting (IS:1030) |
| Shaft | Forged Steel C-45 (IS:1570) |
| Hinge Pin | Forged Steel C-45 (IS:1570) |
| Machine Pulley | Cast iron, flat type with safety Mechanism (IS:210) |
Narendrabhai Patel (Virat Engineering Company)
Near. Railway Crossing, Ahmedabad Road, Dhansura, Sabarkantha, Gujarat - 383310
Share us via
View Contact Number 
