GST : 24ATPPM0138F1ZU
Verified
Write a Review
Our Products
Lathe Machines
2 Products availableHeavy Duty Lathe Machine
2 Products availableWe are leaders in the market for providing best range of Hot Hydraulic Press Machine, Horizontal Hydraulic Press Machine, Mechanical Under Crank Shearing Machine, Dish End Hydraulic Press Machine and Pillar Type Hydraulic Press Machine
Four-roller machines have a top roll, the pinching roll, and two side rolls. The flat metal plate is placed in the machine on either side and "pre-bent" on the same side. The side rolls do the work of bending. The pinching roll holds the plate.
Four-roller machines have a top roll, the pinching roll, and two side rolls. The flat metal plate is placed in the machine on either side and "pre-bent" on the same side. The side rolls do the work of bending. The pinching roll holds the plate.
Under crank shearing machine are drafted and plan through structural inspection technique for prominent performance, continuous and large-scale production, accurateness and high longevity.Some of the unique features of these machines are-
A firm clutch is supplied for giving persistent strokes for production. Under Crank Shearing Machines, have four edged rectangular high quality high carbon high chromium (HCHC) knives for longer durability. Gunmetal bushes are available in all running mechanical parts. A strong mechanical back gauge and hand operated single shot lubrication system is also available in all the shearing machines as standard equipment.
Specifications
| MODEL | CUTTING CAP.IN MS LENGTH X THICKNESS | TABLE HEIGHT | TABLE WIDTH | FRONT GAUGE | BACK GAUGE | MOTOR (HP /RPM) | SIZE OF BLADE | OVER ALL DIMENSION | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LENGTH | WIDTH | THICKNESS | LENGTH | WIDTH | HEIGHT | |||||||
| VIUS - 1 | 1250 X 2 | 750 | 250 | 500 | 500 | 03/01/40 | 1270 | 60 | 14 | 2100 | 1900 | 1300 |
| VIUS - 2 | 1525 X 2 | 750 | 250 | 500 | 500 | 03/01/40 | 1550 | 60 | 14 | 2360 | 1900 | 1300 |
| VIUS - 3 | 2030 X 2 | 800 | 300 | 500 | 500 | 05/01/40 | 2050 | 60 | 14 | 2825 | 1900 | 1300 |
| VIUS - 4 | 2540 X 2 | 800 | 300 | 500 | 500 | 7.5 / 1440 | 2550 | 60 | 14 | 3325 | 1900 | 1300 |
| VIUS - 5 | 3125 X 2 | 800 | 300 | 500 | 500 | 10/01/40 | 3150 | 62 | 18 | 3190 | 1900 | 1300 |
| VIUS - 6 | 1250 X 4 | 800 | 300 | 600 | 600 | 05/01/40 | 1270 | 62 | 18 | 2300 | 2000 | 1350 |
| VIUS - 7 | 1525 X 4 | 800 | 300 | 600 | 600 | 05/01/40 | 1550 | 62 | 18 | 2550 | 2000 | 1350 |
| VIUS - 8 | 2030 X 4 | 800 | 300 | 600 | 600 | 7.5 / 1440 | 2050 | 62 | 18 | 3100 | 2000 | 1350 |
| VIUS - 9 | 2540 X 4 | 800 | 350 | 600 | 600 | 10/01/40 | 2540 | 75 | 18 | 3600 | 2000 | 1350 |
| VIUS - 10 | 3125 X 4 | 800 | 350 | 600 | 600 | 12.5 / 1440 | 3150 | 75 | 18 | 4200 | 2000 | 135 |
Three-roller machines (variable pitch aka variable geometry) have one pressing top roll and two pressing side rolls. The three-roll variable pitch works by having all three rolls able to move and tilt. The top roll moves in the vertical plane and the side rolls move on the horizontal plane. When rolling, the top roll presses the metal plate between the two side rolls. The advantage of having the variable three roll is the ability to roll many thicknesses and diameters of cylinders.
Specifications
| S.N. | Thickness | Max.Diameter | Press Power (ton) |
|---|---|---|---|
| 1 | 6 | 500-4000 | 100 |
| 2 | 12 | 500-4000 | 150 |
| 3 | 16 | 500-5000 | 200 |
| 4 | 20 | 500-5000 | 250 |
| 5 | 25 | 600-5000 | 300 |
| 6 | 30 | 600-5000 | 500 |
| 7 | 35 | 600-5000 | 600 |
| 8 | 40 | 600-5000 | 800 |
| 9 | 45 | 600-5000 | 1000 |
| 10 | 50 | 600-5000 | 1200 |
Four-roller machines have a top roll, the pinching roll, and two side rolls. The flat metal plate is placed in the machine on either side and "pre-bent" on the same side. The side rolls do the work of bending. The pinching roll holds the plate.
Four-roller machines have a top roll, the pinching roll, and two side rolls. The flat metal plate is placed in the machine on either side and "pre-bent" on the same side. The side rolls do the work of bending. The pinching roll holds the plate.
Mr. Gopal Manta (Viraat Industries)
Third Floor, B-337, Sumel 7, N H 08, Nr. Soni Chali BRTS Bus Stand,, Raikhad, Ahmedabad, Gujarat - 380023, India
Share us via
View Contact Number 
