Our Products
Micronutrient Fertilizers
2 Products availableWe offer a complete product range of Mono Ammonium Phosphate, Diammonium Phosphate, mono sodium phosphate, Disodium Phosphate and Trisodium Phosphate
The process for manufacturing MAP is relatively simple. In a common method, a one-to-one ratio of ammonia (NH3) and phosphoric acid (H3PO4) is reacted and the resulting slurry of MAP is solidified in a granulator. The second method introduces the two starting materials in a pipe-cross reactor, where the reaction generates heat to evaporate water and solidify MAP. Other methods exist as well. An advantage of manufactured MAP is that lower-quality H3PO4 can be used compared with other P fertilizers often requiring a more pure grade of acid. The phosphorus pentoxide (P2O5) equivalent content of MAP varies from 48 to 61 percent, depending on the amount of impurity in the acid. The most common fertilizer composition is 11-52-0.No special precautions are needed with the use of MAP. The slight acidity associated with this fertilizer reduces the potential for NH3 loss to the air. MAP can be placed in close proximity to germinating seeds without concern for NH3 damage. However, MAP used in foliar spray or added to irrigation water, shouldn't be mixed with calcium or magnesium fertilizers.
Specifications
Sr. No | Parameters | Unit | Specified value |
---|---|---|---|
1 | Appearance | Visual observation | A white crystalline powder |
2 | Solubility 10% solution | % w/v | Freely soluble in water |
3 | pH of 5% solution | % w/v | 4.0 - 5.0 |
4 | Assay on dried basis | % w/w | Min. 97% |
5 | Phosphate (as P2O5) | % w/w | Min. 58.0 % |
6 | Matter insoluble in water | % w/w | Max. 0.5% |
7 | Moisture | % w/w | Max. 2.0% |
8 | Iron (as Fe) | % w/w | Max. 0.005% |
Di-ammonium phosphate (DAP) also known as Di-ammonium hydrogen phosphate is one of a series of water-soluble ammonium phosphate salts that can be produced when ammonia reacts with phosphoric acid until the desired PH is obtained. DAP produced gets settled down in the solution and then it is further centrifuged to obtain the crystalline powder of Di-ammonium phosphate.
Specification Of Di Ammonium Phosphate (Pure)
Sr. No | Parameters | Unit | Specified value |
---|---|---|---|
1 | Appearance | Visual observation | A white crystalline powder |
2 | Solubility 10% solution | % w/v | Clear & colourless solution |
3 | pH of 5% solution | % w/v | 7.8 – 8.5 |
4 | Phosphate (as P2O5) | % w/w | Min. 52.0 % |
5 | Assay on dried basis | % w/w | Min. 99.0% |
6 | Chloride (as Cl) | % w/w | Max. 0.01% |
7 | Sulphate (as SO4) | % w/w | Max. 0.01% |
8 | Iron (as Fe) | % w/w | Max. 0.002 % |
Specification Of Di Ammonium Phosphate (Technical)
Sr. No | Parameters | Unit | Specified value |
---|---|---|---|
1 | Appearance | Visual observation | An off white to white crystalline powder |
2 | Solubility 10% solution | % w/v | Freely soluble in water |
3 | pH of 5% solution | % w/v | 7.8 – 9.0 |
4 | Phosphate (as P2O5) | % w/w | Min. 46.0 % |
5 | Assay on dried basis | % w/w | Min. 90.0% |
6 | Iron (as Fe) | % w/w | Max. 0.005 % |
We Vinipul Inorganics Pvt. Ltd. Synthesize and supply quality Monosodium Phosphate. The product offered by us is synthesized from quality ingredients, and occurs in anhydrous or crystalline form, being either colourless or white in color.Monosodium phosphate (MSP), also known as monobasic sodium phosphate and sodium dihydrogen phosphate, is an inorganic compound of sodium with dihydrogen phosphate (H2PO4−) anion. One of many sodium phosphates, it is a common industrial chemical.
Specifications
Sr. No | Parameters | Unit | Specified value |
---|---|---|---|
1 | Appearance | Visual observation | A white crystalline or fine powder |
2 | Solubility (10% solution in water) | % w/v | Colourless & Clear solution |
3 | pH of 5% solution | % w/v | 4.0 - 4.7 |
4 | Assay (Dried basis) | % w/w | Min. 99.0% |
5 | Phosphate (as P2O5) | % w/w | Min. 58.0% |
6 | Arsenic (As) | % w/w | 5 ppm max. |
7 | Lead (as Pb) | % w/w | 5 ppm max. |
8 | Iron (as Fe) | % w/w | 50 ppm max. |
9 | Loss on drying | % w/w | 1.0 % max |
The Di Sodium Phosphate also known as Sodium Phosphate Di Basic, Di Sodium Hydrogen Phosphate, Di Sodium Hydrogen Orthophosphate is sodium salt of phosphoric acid and occurs as a white powder which is highly water soluble and hygroscopic. Di-sodium Phosphate is obtained when a solution of phosphoric acid is reacted with caustic soda, until the higher PH is obtained. We Vinipul Inorganics Pvt. Ltd. are one of biggest manufacturer of Di Sodium phosphate in term s of quantity manufacturing; we can manufacture more than 1000 tons of Di Sodium phosphate and Tri Sodium Phosphate in one month. Our products are verified with are team of chemical expert and 3 step verification is done to ensure the best quality of Di Sodium phosphate. We provide Hdpe packaging of our products in 25, 30, 40, 50 kgs sacks and bags or as per customer requirement.
Specifications
Sr. No | Parameters | Unit | Specified value |
---|---|---|---|
1 | Appearance | Visual observation | A white powder, hygroscopic. |
2 | Solubility (10% solution) | % w/v | Clear solution |
3 | pH of 5% solution | % w/v | 9.0 – 9.5 |
4 | Assay (LOD basis) | % w/w | 99.0% min |
5 | Phosphate (as P2O5) | % w/w | 49.0% min |
6 | Chloride (as Cl) | % w/w | 0.010% max. |
7 | Sulphate (as SO4) | % w/w | 0.010% max. |
8 | Iron (as Fe) | % w/w | 0.002% max |
9 | Lead (as Pb) | % w/w | 0.0005% max |
10 | Arsenic (as As) | % w/w | 0.0005% max |
11 | Loss on drying (at 120°C) | % w/w | 1.0 % max |
Lead (Pb) | 5 PPM | 0.2 | |
Arsenic | 5 PPM | 0.03 |
Tri-sodium phosphate (TSP) is the inorganic compound. It is a white, granular or crystalline solid, highly soluble in water producing an alkaline solution. Tri-sodium phosphate is manufactured by neutralization of phosphoric acid solution using sodium hydroxides along with sodium carbonate. We do safe packaging for our product and use Hdpe bags and sack of 20, 25 kgs, 50 kgs or as per customer requirement. The Tri sodium we manufacture is properly shipped and verify to ensure timely delivery to our customer.
Specifications
Sr. No | Parameters | Unit | Specified value |
---|---|---|---|
1 | Appearance | Visual observation | A white, crystalline or fine powder |
2 | Solubility (10% solution in water) | % w/v | Clear & colourless solution |
3 | PH (1% solution) | % w/v | 11.5 – 12.5 |
4 | Assay | % w/w | Min. 98.0% |
5 | Phosphate (as P2O5) | % w/w | Min. 41.0% |
6 | Soluble Iron (as Fe) | % w/w | Max. 0.05% |
7 | Insoluble Substances | % w/w | Max 0.20% |
8 | Carbonate (as Na2CO3) | % w/w | Max. 2.0 % |
9 | Free sodium hydroxide (as NaOH) | % w/w | Max. 3.2 % |
10 | Arsenic | % w/w | Max. 0.0005% |
11 | Heavy Metals (as Pb) | % w/w | Max. 0.0005% |
Di Potassium Phosphate is a common source of phosphorus and potassium, with popular names such Di Potassium Hydrogen Orthophosphate, Di Potassium Hydrogen Phosphate, Di Potassium Phosphate Anhydrous, and Potassium Phosphate Dibasic is widely required in many industries and has multiple uses. Di-Potassium phosphate is formed when two equivalents of potassium react with phosphoric acid until the desired PH is obtained. Solution is then further dried to get fine quality white powder.Di-Potassium phosphate also known as potassium hydrogen orthophosphate and potassium phosphate dibasic is a highly water-soluble salt which is often used as a fertilizer, food additive and buffering agent. It is a common source of phosphorus and potassium.
Specifications
Sr. No | Parameters | Unit | Specified value |
---|---|---|---|
1 | Appearance | Visual observation | A white to off white powder, Hygroscopic. |
2 | Solubility | % w/v | Soluble in water |
3 | Insoluble matter in water | % w/w | 0.2% max. |
4 | pH of 5% solution | % w/v | 8.50 – 9.60 |
5 | Assay% | % w/w | 98.0% min |
6 | Identification | % w/w | A)It responds to the test of potassium salt & phosphate |
We Vinipul Inorganics Pvt. Ltd. are one of biggest manufacturer of Tripotassium phosphate in term s of quantity manufacturing;we can manufacture more than 1000 tons of Di Potassium phosphate and Tri Potassium Phosphate in onemonth. Our products are verified with are team of chemical expert and 3 step verification is done to ensure the best quality of Potassium phosphate. Our Tri potassium phosphate maintains a minimum PH of 11.5, as compared to Mono and Di potassium Phosphates. Tri potassium phosphate is also known as Potassium Phosphate tribasic.
Specifications
Sr. No | Parameters | Unit | Specified value |
---|---|---|---|
1 | Description | Visual observation | White powder, Hygroscopic |
2 | Identification | Test for Potassium & Phosphate | Complies |
3 | Solubility (5% solution in water) | % w/v | Freely soluble & clear solution |
4 | pH (1% solution) | % w/w | 11.5 – 12.5 |
5 | Purity % (Calculated on ignited basis) | % w/w | Min. 97% of K3PO4 |
6 | Chlorides (as Cl) | % w/w | 0.010% max |
7 | Sulphate (as SO4) | % w/w | 0.005% max |
8 | Iron as Fe | % w/w | 0.001% max |
9 | Loss on Ignition (at 800°C) | % w/w | 5.0 % max |
Monobasic Sodium Phosphate is also known as Monosodium Phosphate, Sodium di hydrogen orthophosphate, Sodium di hydrogen phosphates. We Vinipul Inorganics Pvt. Ltd. Synthesize and supply quality Mono Sodium Phosphate. The product offered by us is synthesized from quality ingredients, and occurs in anhydrous or crystalline form, being either colourless or white in color.Monosodium phosphate (MSP), also known as monobasic sodium phosphate and sodium dihydrogen phosphate, is an inorganic compound of sodium with dihydrogen phosphate (H2PO4) anion. One of many sodium phosphates, it is a common industrial chemical.
Specifications
Sr. No | Parameters | Unit | Specified value |
---|---|---|---|
1 | Appearance | Visual observation | A white crystalline or fine powder |
2 | Solubility (10% solution in water) | % w/v | Colourless & Clear solution |
3 | pH of 5% solution | % w/v | 4.0 - 4.7 |
4 | Assay (Dried basis) | % w/w | Min. 98.0% |
5 | Phosphate (as P2O5) | % w/w | Min. 58.0% |
6 | Arsenic (As) | % w/w | 5 ppm max. |
7 | Lead (as Pb) | % w/w | 5 ppm max. |
8 | Iron (as Fe) | % w/w | 50 ppm max. |
9 | Loss on drying | % w/w | 1.0 % max |
We are a quality conscious organization, engaged in manufacturing, supplying and exporting premium quality Sodium Phosphate Di basic that is extensively used as a laxative and pH buffer. It is formulated by our team of experts in accordance with the set global industry standards utilizing optimum grade chemical substances. Sodium Phosphate is generally prepared from mined phosphate rock. It is widely used in food and water treatment.Our Sodium phosphate has high levels of purity and usefulness. These are formulated using high-quality chemicals, resulting in a product of high purity and chemical stability.
Specifications
Sr. No | Parameters | Unit | Specified value |
---|---|---|---|
1 | Appearance | Visual observation | A white powder, hygroscopic. |
2 | Solubility (10% solution) | % w/v | Clear solution |
3 | pH of 5% solution | % w/v | 9.0 – 9.5 |
4 | Assay (LOD basis) | % w/w | 99.0% min |
5 | Phosphate (as P2O5) | % w/w | 49.0% min |
6 | Chloride (as Cl) | % w/w | 0.010% max. |
7 | Sulphate (as SO4) | % w/w | 0.010% max. |
8 | Iron (as Fe) | % w/w | 0.002% max |
9 | Lead (as Pb) | % w/w | 0.0005% max |
10 | Arsenic (as As) | % w/w | 0.0005% max |
11 | Loss on drying (at 120°C) | % w/w | 1.0 % max |
The Di Sodium Hydrogen Phosphate also known as Sodium Phosphate Di Basic, Di Sodium Hydrogen Orthophosphate is sodium salt of phosphoric acid and occurs as a white powder which is highly water soluble and hygroscopic. Di-sodium Phosphate is obtained when a solution of phosphoric acid is reacted with caustic soda, until the higher PH is obtained.
Specifications
Sr. No | Parameters | Unit | Specified value |
---|---|---|---|
1 | Appearance | Visual observation | A white powder, hygroscopic. |
2 | Solubility (10% solution) | % w/v | Clear solution |
3 | pH of 5% solution | % w/v | 9.0 – 9.5 |
4 | Assay (LOD basis) | % w/w | 99.0% min |
5 | Phosphate (as P2O5) | % w/w | 49.0% min |
6 | Chloride (as Cl) | % w/w | 0.010% max. |
7 | Sulphate (as SO4) | % w/w | 0.010% max. |
8 | Iron (as Fe) | % w/w | 0.002% max |
9 | Lead (as Pb) | % w/w | 0.0005% max |
10 | Arsenic (as As) | % w/w | 0.0005% max |
11 | Loss on drying (at 120°C) | % w/w | 1.0 % max |
Lead (Pb) | 5 PPM | 0.2 | |
Arsenic | 5 PPM | 0.03 |
Mono Potassium Phosphate is a chemical compound that finds immense application in the fertilizer industry in the manufacturing of potash and other fertilizer products. Mono potassium phosphate is formed when caustic potash lye or caustic potash flakes are added to the solution of phosphoric acid until the desired PH is obtained and further dried to obtain fine quality white powder. Mono Potassium Phosphates is a rich source of phosphorous and potassium.
Specifications
Sr. No | Parameters | Unit | Specified value |
---|---|---|---|
1 | Nature | Visual observation | Crystalline, hygroscopic powder |
2 | Colour | Visual observation | White to buff |
3 | Clarity of 10% solution in water | % w/v | Should be clear |
4 | pH 5% solution | % w/v | 4.0 – 5.0 |
5 | Assay% by mass | % w/w | 97.0 % min. |
6 | Moisture% by wt. | % w/w | 1.0% max. |
7 | Phosphate (as P2O5%) | % w/w | 48.0% min |
Disodium Saltis an inorganic compound with the formula Na2S2O3.xH2O. Typically it is available as the white or colourless pentahydrate, Na2S2O3•5H2O. The solid is an efflorescent (loses water readily) crystalline substance that dissolves well in water. It is also called sodium hyposulfite or "hypo".
We packed our Sodium Thiosulphate in 25 kg Multicolour strong Woven Polypropylene bags with a PP inner liner. Depending on customer requirement we also pack in Jumbo bags (1.1Mts), 50 kg and 25 kg HDPE bags.
Specifications
Grade | Anhydrous | Crystal | Pentahydrate |
---|---|---|---|
Appearance | White Fine Powder | Small crystal | White pallets |
Assay | 98% Min | 97% Min | 98 % Min. |
pH of 5 % | 6 to 8 | 6 to 8.5 | 6 to 8.5 |
Chloride | 0.50% | 0.50% | 0.50% |
Iron | 0.50% | - | - |
Lead | 5 PPM | - | 5 PPM |
Arsenic | 5 PPM | - | 5 PPM |