Our Products
Boiler And Boiler Parts
2 Products availableValves & Valve Fittings
2 Products availableSeparating Machines
1 Products availableIndustrial & Engineering Products
1 Products availableIndustrial Blowers, Coolers & Fans
1 Products availableIndustrial Valves
1 Products availableDust Collectors
1 Products availableMagnetic Separators
1 Products availablePumps, Pumping Machines & Parts
1 Products availableOur Complete range of products are Duplex Design, Simplex Design, heating unit and recirculation fan.
We offer the most efficient quality Limiting Orifice Gas Valves in India. Orifice Gas Valves are designed to allow precise setting of high fire for fine control of gas flow. Limiting orifice valve are designed for adjusting gas flow to the burner tip to maintain accurate gas-air ratio. These are simple and easy to use. Limiting orifice valves are provided with "v" port plug which can be adjusted with screw provided on top with safety cover. These valves are suitable for LPG , CNG, and Producer Gas.
Raw Materials Used : Product Features :
Applications :
We manufacture and supply top quality heating and pumping units, which are made from qualitative components procured from the most well known vendors. These are custom designed to meet the requirement of our customers. Our heating and pumping units are applicable to deliver heavy viscosity fuel oils to furnaces, kilns, oven, dryers, boilers etc at a pressure of 15-20 psi and at a temperature of 90-100C and near burner tip. Apart from this, our fuel oil handling system minimizes start up difficulties and reduces maintenance costs.
The Pumping and Heating Units are supplied in the following three models : Capacities : VINAYAK's Pumping and heating units are supplied in various capacities depanding on the total oil Consumption in the burners to be pump and preheat. The following table gives the maximum amount of oil which can be heated by unit of a particular size. Special Type of Heating and Pumping Units Suitable for Thermic Fluid : The Pumping and Filtering Units are Supplied in the Following Three Models :
Applications :
KWLiters per Hrs.20oC30oC40oC50oC60oC70oC80oC90oC100oC110oC120oC17047352823201816141312214094705646403632282624321014110584696054484239364280188140112928072645652486420282210168138120108968478729630423315252207180162144126117108128405644203362762402161921681561441611207525604483683202882562242081921812608466305044143603242882522342162416801128840672552480432384336312288362520169212601008828720648576504468432
Our pressure blowers are generally direct driven type, i.e. impeller is directly mounted on the shaft of standard TEFC 3 Phase electric motor, running at 2880 RPM. Our Combustion air blowers are fabricated from heavy gauge mild steel sheets and structural. The impeller is mostly of riveted construction and is carefully balanced, statically and dynamically to obtain a perfectly vibration free running. The impellers may be of M.S., and S.S. grade aluminum. The inlet to the blower is generally open to atmosphere but provided with safety cover. Easy removal of the impeller for maintenance purposes is facilitated by providing large inlet cover on the inlet side. Combustion blowers can also be supplied with V Belt drive arrangement or drive through flexible coupling when required. Combustion or Pressure Blowers :
These are generally direct driven type, i.e impeller is directly mounted on the shaft of standard TEFC 3 Phase electric motor, running at 2880 RPM, These blowers are mainly used for the following applications : For fuel firing :That is to supply requisite amount of air at constant pressure for the proper atomization and complete combustion of oil in the burners. To supply combustion air to foundry cupolas. Forced air cooling of products.Forced air conveying systems. Liquid agitation, etc. Vinayaks combustion air blowers are fabricated from heavy gauge mild steel sheets and structural. The impeller is mostly of riveted construction and is carefully balanced, statically and dynamically to obtain a perfectly vibration free running. The impellers may be of M.S., and S.S. grade. Aluminum. The inlet to the blower is generally open to atmosphere but provided with safety cover. Easy removal of the impeller for maintenance purposes is facilitated by providing large inlet cover on the inlet side. Combustion blowers can also be supplied with V Belt drive arrangement or drive through flexible coupling when required. Characteristic curves and standard range of our blowers :Vinayaks combustion blowers are available from 1 to 200 H.P. with discharge capacities from 100 CFM to 12000 CFM (160 to 1000 m3/hr) and pressures from 4 to 64 SWG (100 to 18000 mm SWG).
Properties :Our induced draft blowers are high volumetric and are generally used to handle hot gases or hot air. Below 80C, the blowers may be direct driven type, but above this they are either belt driven or driven through flexible couplings. Induced draft blowers can be supplied in M.S., S.S. construction. These are high volumetric but low pressure blowers generally used to handle hot gases or hot air. Below 80C, the blowers may be direct driven type, but above this they are either belt driven or driven through flexible couplings. Induced draft blowers can be supplied in M.S., S.S. construction. Mild Steel is suitable for working upto 300C, whereas with S.S. construction, they can be used upto 600C with V belt or flexible drive, and with water cooled bearings they can work satisfactorily at as high as 1000C. The impellers are in welded construction and are statically & dynamically balanced. Vinayaks also makes SPECIAL BLOWERS for extra high temperatures upto 1000C, in which bearings and shaft are continuously cooled with running water. Oil lubrication for the bearings also can be provided. Different sizes are available to suit individual requirements of customers in M.S. and / or S. S. construction with horizontal or vertical mounting arrangement.
Sizes Available :Vinayaks Cyclone Separator is simple, low cost and efficiently designed for high performance. These are generally used for removing dry solid particle from air without the use of filters through vortex separation. We offer high quality Cyclone Separator that is appreciated by our clients across the globe. They are mainly divided into two classes:
High speed rotating (air) flow is established within a cylinder and conical container to separate mixtures of solids and fluids. Air flows in a spiral pattern, beginning at the top inside the cylindrical shape and ending at the bottom inside the conical shape. Solid particle losses its velocity before exiting the cyclone from the top and solid particle gets collected at the bottom , only clean air exit from the center.
Application :Vinayak industries high pressure burners are widely used on heat treating and melting furnaces, incinerators, chemical process equipment. High pressure burners are provided with C.I. front mounting plate, 1 no. primary butterfly valve, 1 no. secondary butterfly valve, 1 no. gun metal micro valve for fine oil control, 1 no. air body. High pressure burners are Duel Fuel Burner suitable for light oil, heavy oil and gas.
Above burners can be provided with spark plug, pilot burner, burner block, P.I.D. control for Low fire and high fire.
Product Features :We are the prominent manufacturer, supplier and exporter of Dust Collector Unit, which is the most economical and effective solution for assorted range of dust collection. Dust collectors are simple, low cost and efficiently designed for high performance.Dust collectors are mainly consist of following part.
Contaminated air from dust generation source is drawn through the inlet provided at the bottom of hopper where heavy particle lost there velocity and dropped into the dust bin. Light particle get deposited on outer surface of filter bag and only clean air get exhausted through blower to atmosphere.
Application :We are known as one of the most prominent low pressure burner manufacturers and suppliers in India. Our durable low air pressure burner has been designed to operate & burn light & heavy grades of fuel oils using only low pressure air and oil. Perfect oil atomization is obtained without the use of compressed air or high pressure oil. The heavy oil needs to be preheated to obtain the correct viscosity before being passed through the burner. The construction of the burner is robust with cast iron bodies giving them durability in the high temperature operations. Our low air pressure burner complete with air and oil control valve is suitable for only oil and can be used with pumping system as well as gravity feed system.
Product Features : Application :
Uses :
We manufacture and supply top quality heating and pumping units, which are made from qualitative components procured from the most well known vendors. These are custom designed to meet the requirement of our customers. Our heating and pumping units are applicable to deliver heavy viscosity fuel oils to furnaces, kilns, oven, dryers, boilers etc at a pressure of 15-20 psi and at a temperature of 90-100C and near burner tip. Apart from this, our fuel oil handling system minimizes start up difficulties and reduces maintenance costs.
The Pumping and Heating Units are supplied in the following three models : Capacities : VINAYAK's Pumping and heating units are supplied in various capacities depanding on the total oil Consumption in the burners to be pump and preheat. The following table gives the maximum amount of oil which can be heated by unit of a particular size. Special Type of Heating and Pumping Units Suitable for Thermic Fluid : The Pumping and Filtering Units are Supplied in the Following Three Models :
Applications :
KWLiters per Hrs.20oC30oC40oC50oC60oC70oC80oC90oC100oC110oC120oC17047352823201816141312214094705646403632282624321014110584696054484239364280188140112928072645652486420282210168138120108968478729630423315252207180162144126117108128405644203362762402161921681561441611207525604483683202882562242081921812608466305044143603242882522342162416801128840672552480432384336312288362520169212601008828720648576504468432