Vinayakashot Pvt. Ltd.

Old Palasia, Indore, Madhya Pradesh

Almen Strips : Electronics Inc. (EI) manufactures and maintains the world’s largest inventory of Almen strips for global distribution. EI can provide strips to any specification, from standard MIL to rigid aerospace specifications. Almen “A”, “N” or “C” strips in Grades 3™, 2™, 1™ and 1-S™ are ready-to-use and are pre-qualified. Our “A” and “N” Almen strips have the lot number printed on both sides and a patented coverage check finish. These features add value to a quality shot peening process.

The Double-Sided Numbering System

• Ensures that the lot number is legible after peening
• Provides room for notes; for example, print numbers, procedure numbers, the date and the arc height reading
• Gives a tracking method for meeting specifications, ISO and Nadcap audit requirements, and first-in, first-out requirements
• Allows lot-to-lot comparison for process consistency
• Part of Electronics Inc.’s comprehensive traceability and audit program
• Denotes genuine EI product
• Both “A” and “N” strips have the Double-Sided Numbering System

The Coverage Check Finish (U.S. Patent No. 6, 568, 239)

• Lapses in coverage are easy to check visually
• Contributes to a proper rotary-flap peening technique
• Enhances capabilities of coverage checker tools
• Both “A” and “N” strips have the Coverage Check Finish
• *Grades 3, 2, 1 and 1S are trademarks of Electronics Inc

Almen Strips are classified into 3 types: 'A', 'N', and 'C'. They differ in their thickness, while they have the same width and length.

• Almen strip of "A" type is predominantly used for shot peening with cast shot or cut wire shot.
• "N" type strips are used usually for glass bead peen and ceramic bead peen.
• "C" type almen strips are used more rarely and are thicker than the other types.

luminum oxide is a chemical compound of aluminium and oxygen with the chemical formula AlO. It is the most commonly occurring of several aluminium oxides, and specifically identified as aluminium(III) oxide.

We have acquired a position of prominence in the global markets as a Manufacturer, Exporter and Supplier of Steel FibreS in Indore. The Steel Fibres, offered by us, are widely appreciated and demanded across the global markets owing to their quality and corrosion resistant properties. The Steel Fibre can be availed at the best prices on a timely basis.

Highlights Of Steel Fibre :

• Quality assured
• Made using the best materials
• Strong and durable
• Corrosion resistant

Available as per following Specifications : ASTM A820

Available Shapes :

• Straight Steel Fiber
• Hooked ends Steel fiber
• Round Crimped Steel Fiber
• Flat corrugated

Features :

• Rust resistance
• High tensile strength
• Fine finish

Applications :

• Electrical Industry
• Textile Industry
• Carpets
• Communication lines

Because of its characteristic, it provides a perfect atomizing of materials size, density, hardness and durability. Hence, the efficiency of abrasive reduces the consumption rate and increases the productivity as well as non-toxic environment status. PS Ball is an inexpensive material when we compared to other mineral materials. PS Ball can be recycled up to 3-4 times based on its surface toughness.
Being processed with SAT, ions dissociated in ion form can be as stable oxide compound in Spinel Structure. Spinel Structure with general chemical formula AB2O4 is octahedron shaped structure as illustration in which oxygen atom is almost filled with cube clise packed packing that is the structure with B atom surrounding 6 oxygen atoms in octahedron and with Atom surrounding 4 oxygen atoms.
There is Spinel as typical example in this Spinel Structure. Such as this crystal generally has solidity 5.58, luster like glass and high index of reflection.
Colorless and transparent one is very solid, weathering proof and corrosion proof to the extent that could be used as gem.
As the surface of this is formed with an oxide compound in Spinel Structure, ion or electron moving required in chemical reaction become difficult and therefore it forms stable compound and very strong resistance to chemical, physical cause as weathering. So, Spinel particles transformed from convert reactor slag with SAT doesnt break out pollution problem.
PS Ball is the noble product of slag atomizing process. We named if Precious, since it is converted from valueless waste into new born material with good value added.
It is an environment-Friendly material with stable status of Spinet Structure by rapid air & mist cooling system, proven by authorities.

ApplicationPS Ball has excellent physical properties such as spherical shape, high strength and low abrasive rate. Using these characteristics, the excellent performance was proven in use of Repair and Reinforcing Material, Abrasive Blasting Material, Roof Material, Non-slip Material etc. Furthermore, PS Ball has been applied widely to the substitute for river sand after acquirement of Construction Mark.

We are manufacturer of ferrous and non ferrous precision balls manufacturer in HCHC Balls , SS-202, SS-302, SS-304, SS-316, SS-410 etc.

Applications:

• Where material toughness and resistance to corrosion are more important than hardness.
• They have good corrosion resistance to the food environment, oxidizing solution and most organic chemicals, application are valves , aerosol and finger pumps, corrosions resistance is higher after annealing and passivation. Not resistant to sulphuric acids.

International Equivalents : DIN X CR Ni 18.09, JIS SUS 304,

Chemical Composition:

• GRADE AISI 302- 0.12%Max
• Cr - 17-19%
• Ni - 8-11%
• Si - 1.0%Max
• Mo -10%Max
• Mn - 2.0%Max
• P - 0.045%Max
• S - 0.03%Max

Features :-

• Made available in form of Steel Shot ( Cast Steel Shot) and Steel Cut wire shot
• Designed to provide 40-50% more life by reducing shot blasting machine wear & tear by more than 60%
• Crack resistant finish
• Ideal for general purpose de-scaling, de-burring, de-flashing as well as shot peening applications
• Can also be used in commercial cleaning of aluminum and zinc casting
• Produces low dust and delivers longer recycle life

We are offering lead roll.

Brass Shot is made through Brass Wire ( copper and Zinc Alloys), it is used in brass product shot blasting/ Polishing

Details

• The Double-Sided Numbering System
• Ensures that the lot number is legible after peening
• Provides room for notes; for example, print numbers, procedure numbers, the date and the arc height reading
• Gives a tracking method for meeting specifications, ISO and Nadcap audit requirements, and first-in, first-out requirements
• Allows lot-to-lot comparison for process consistency
• Part of Electronics Inc.’s comprehensive traceability and audit program
• Denotes genuine EI product
• Both “A” and “N” strips have the Double-Sided Numbering System
• The Coverage Check Finish (U.S. Patent No. 6, 568, 239)
• Lapses in coverage are easy to check visually
• Contributes to a proper rotary-flap peening technique
• Enhances capabilities of coverage checker tools
• Both “A” and “N” strips have the Coverage Check Finish
• *Grades 3, 2, 1 and 1S are trademarks of Electronics Inc