Write a Review
Our Products
Pressure Switches
2 Products availableValves & Valve Fittings
1 Products availableOil And Lubricants
1 Products availableTransmitter Device
1 Products availableTemperature Switches
1 Products availableSensors
1 Products availableStarters
1 Products availableWe offer the best product range of Kirloskar / Grasso - KC/RC11 Compressor Spares, SABROE / SMC Compressor Spares, Receiver Valve Non-Back seating (Angle Valve), Thermostatically operated valves and Coils for valves.
Select from our large inventory of KIRLOSKAR / GRASSO compressor spare parts for HVAC applications including air conditioning and refrigeration System. All parts photo and part no. displayed. Other than displayed parts will be given on Request. .
Select from our large inventory of SABROE / SMC compressor spare parts for HVAC applications including air conditioning and refrigeration System. All parts photo and part no. displayed. Other than displayed parts will be given on Request.
RENISO K Oil
Description
The oils of the RENISO K series are highly refined, naphthene-based selective raffinates that have been dewaxed to a great extent for use as refrigeration oils at low temperatures. Because of their high degree of raffination, the mineral oils of the RENISO K series are very resistant to aging, both in contact with ammonia (NH3) and with HCFC.
Application
RENISO K refrigeration oils are used both for conventional NH3 applications with flooded evaporation according to DIN 51 503 KAA, as well as for halogenated chlorofluorocarbons (HCFC) according to DIN 51 503 KC.
Advantages
RENISO S/SP
Description
The RENISO S/SP series are fully synthetic, alkylbenzene-based refrigeration oils with antiwear properties for chlorine-containing refrigerants. Sophisticated production processes ensure that the RENISO S/SP products are sulphur- and wax-free. RENISO S/SP products were developed for critical applications especially when good anti wear properties are required. Compared to equiviscous, mineral oil-based refrigeration oils, the followingn wear protection values were established:
Application
RENISO SP products are recommended for use in
RENISO S 68 is particularly recommended for R717 (NH3) systems. Because of its good solubility RENISO S/SP oils are recommended for R22 or R22 refrigerant mixtures such as R401A/B and R402A/B.
In general, RENISO S/SP oils are recommended whenever other refrigeration oils provide insufficient protection against wear. RENISO S/SP oils are strongly recommended for lubricating heat pumps.
Advantages
General Information
Because of its additivation the RENISO SP-series is not suitable for the use with ammonia. For NH3 applications we recommend RENISO S 68 which is free of additives.
Product does not contain anti wear additives
RENISO TRITON SE/SEZ
Description
The refrigeration oils of the RENISO TRITON SE/SEZ series are based on synthetic esters that were especially developed for use with chlorine-free, fluorinated hydrocarbons (HFC/HCFC). In contrast to conventional refrigeration oils, these are miscible with the comparatively polar HFC/HCFC.
Application
The RENISO TRITON SE/SEZ series is outstandingly suited for all refrigerant circuits, in which chlorine-free HFC/HCFC refrigerants, e.g. R134a, R404A or R410A are used. Depending on the viscosity, RENISO TRITON SE/SEZ refrigeration oils are recommended for hermetical, semihermetical and open piston compressors and for screw-type and turbo-compressors. RENISO TRITON SEZ 22 is especially suitable for deepfreeze systems operating with R23.
Note
Because of their chemical structure, ester-based oils tend to absorb water. For this reason, RENISO TRITON SE/SEZ oils can only come into contact with air briefly when the system is being filled. The contents of an opened container must be used within one working day.
Advantages
Typical technical data:
| Product name/ Properties |
Unit | KM 32 | KS 46 | KC 68 | KES 100 | Test method |
| Color index | - | 1.0 | 1.0 | 1.0 | 1.5 | DIN ISO 2049 |
| Density at 15°C | kg/m³ | 891 | 895 | 900 | 904 | DIN 51 757 |
| Kinematic viscosity at 40 °C at 100 °C |
mm2/s mm2/s |
32 4,8 |
46 5,8 |
68 7,2 |
100 8,8 |
DIN 51 562-1 |
| Viscosity index | - | 47 | 47 | 45 | 41 | DIN ISO 2909 |
| Pour point | °C | - 45 | - 42 | - 39 | - 33 | DIN ISO 3016 |
| Flow in U-tube | °C | - 35 | - 30 | - 25 | - 18 | - |
| Flocking point (R12) | °C | - 50 | - 50 | - 50 | - 52 | DIN 51 351 |
| Neutralization number | mgKOH/g | 0.01 | 0.01 | 0.01 | 0.01 | DIN 51 558-3 |
| Flash point | °C | 185 | 195 | 200 | 220 | DIN ISO 2592 |
| Refrigerant resistance (R12) | h | >96 | >96 | >96 | >96 | DIN 51 593 |
| Water content | mg/kg | 25 | 25 | 25 | 25 | DIN 51 777-1 |
| Breakdown voltage | KV | >40 | >40 | >40 | >40 | DIN VDE 0370-1 |
| Four ball scar diameter (1h at 150 N) |
RENISO SP 46 | 0,3 mm (mineral oil: 0,6 mm) |
| Almen-Wieland test | RENISO SP 46 | 9000 N (mineral oil: 1000 N) |
Typical technical data:
| Product name /Property | Unit | SP 32 | SP 46 | SP 100 | Test method |
| Colour | - | 1,0 | 0,5 | 0,5 | DIN ISO 2049 |
| Density at 15°C | kg/m³ | 882 | 872 | 871 | DIN 51 757 |
| Flash point | °C | 172 | 175 | 190 | DIN-ISO 2592 |
| Kinematic Viscosity at 40°C at 100°C |
mm²/s mm²/s |
32 4,6 |
46 5,1 |
100 8,1 |
DIN 51 562-1 |
| Pour point | °C | -39 | -42 | -27 | DIN-ISO 3016 |
| U-tube flowing | °C | -32 | -30 | -21 | DIN 51 568 |
| R 12 floc point | °C | -70 | -70 | -70 | DIN 51 351 |
| Neutralization number | mgKOH/g | 0,03 | 0,03 | 0,03 | DIN 51 558-3 |
| Water content | mg/kg | < 30 | < 30 | < 30 | DIN 51 777-2 |
Typical technical data:
| Product name /Property | Unit | SP 220 | SP 68* | Test method |
| Colour | - | 0,5 | 0,5 | DIN ISO 2049 |
| Density at 15°C | kg/m³ | 872 | 869 | DIN 51 757 |
| Flash point | °C | 210 | 188 | DIN-ISO 2592 |
| Kinematic Viscosity at 40°C at 100°C |
mm²/s mm²/s |
220 13,4 |
68 6,2 |
DIN 51 562-1 |
| Pour point | °C | -27 | -36 | DIN-ISO 3016 |
| U-tube flowing | °C | -18 | -24 | DIN 51 568 |
| R 12 floc point | °C | -70 | -70 | DIN 51 351 |
| Neutralization number | mgKOH/g | 0,03 | 0,03 | DIN 51 558-3 |
| Water content | mg/kg | < 30 | < 30 | DIN 51 777-1 or DIN 51 777-2 |
Typical technical data:
| Product name / Properties | Unit |
SEZ 15 |
SEZ 22 |
SEZ 32 |
SE 55 |
Test method |
| Density at 15°C | kg/m³ | 1022 | 995 | 1007 | 1009 | DIN 51 757 |
| Flash point | °C | 210 | 240 | 240 | 270 | DIN ISO 2592 |
| Color | ASTM | 0.5 | 0.5 | 1.0 | 1.0 | DIN ISO 2049 |
| Kinematic viscosity at 40 °C at 100 °C |
mm2/s mm2/s |
15.7 3.6 |
21 4.5 |
32 6.1 |
55 9.0 |
DIN 51 562-1 |
| Viscosity index | - | 112 | 130 | 141 | 143 | DIN ISO 2909 |
| Pour point | °C | -60 | -60 | -48 | -51 | DIN ISO 3016 |
| Neutralization number | mgKOH/g | 0.03 | 0.03 | 0.03 | 0.03 | DIN 51 558-3 |
| Water content | mg/kg | 50 | 50 | 50 | 50 | DIN 51 777-1 |
| Compressors and/or systems: |
SEZ 15 |
SEZ 22 |
SEZ 32 |
SE 55 |
SEZ 68 |
SEZ 80 |
SEZ 100 |
SE 170 |
| R134a | ||||||||
| Refrigerators | 1 | 1 | 2 | 4 | 4 | 4 | 4 | 4 |
| Household refrigerators | 2 | 1 | 1 | 3 | 4 | 4 | 4 | 4 |
| Semi-hermetical and completely hermetical compressors |
4 | 2 | 1 | 2 | 2 | 3 | 3 | 4 |
| Open compressors | 4 | 3 | 1 | 1 | 1 | 2 | 2 | 4 |
| Screw-type compressors | 4 | 3 | 3 | 3 | 3 | 3 | 2 | 1 |
| Turbocompressors | 4 | 4 | 4 | 1 | 1 | 2 | 2 | 4 |
| A/C systems for pass. vehicles | 4 | 4 | 4 | 1 | 1 | 2 | 2 | 4 |
| R23 | ||||||||
| Piston and screw-type compressors |
2 | 1 | 1 | 4 | 4 | 4 | 4 | 4 |
Pressure relief valves are Compatible with all CFC, HCFC and HFC Refrigerants and oils and other Industrial gases and fluids non-corrosive to steel and brass. (With suitable Gland/Seal).
Construction
| Part No. | NPT A (in) |
Flare B(in) |
C Hex a/f (mm) |
D Hex a/f (mm) |
H (mm) |
App Wt (gm) |
|---|---|---|---|---|---|---|
| PRV-06 | 1/4 | 22 | 54.7 | 90 | ||
| PRV-10 | 3/8 | 3/8 | 25.4 | 22 | 80 | 158 |
| PRV-12 | 1/2 | 1/2 | 35 | 32 | 100 | 393 |
Angle valves are Compatible with all CFC, HCFC and HFC Refrigerants and oils and other Industrial fluids non-corrosive to steel and brass. (With suitable Gland/Seal).
Construction
| Part No. | NPT A (in) |
Flare B(in) |
L1 (mm) |
H1 (mm) |
H2 (mm) |
WT (gm) |
|---|---|---|---|---|---|---|
| AV-06 | 1/4 | 1/4 | 27 | 66 | 27.5 | 85 |
| AV-10 | 3/8 | 3/8 | 31 | 73.5 | 40.5 | 125 |
| AV-10B | 3/8 | 1/4 | 31 | 73.5 | 40.5 | 122 |
| Part No. | NPT A (in) |
Flare B(in) |
L1 (mm) |
H1 (mm) |
H2 (mm) |
WT (gm) |
|---|---|---|---|---|---|---|
| AV-06F | 1/4 | 1/4 | 27 | 66 | 27.5 | 83 |
| AV-10F | 3/8 | 3/8 | 31 | 73.5 | 40.5 | 122 |
| Material Specifications | |||
|---|---|---|---|
| No. | Part | Material | |
| 1 | Cap | ABS Plastic / Brass | |
| 2 | Gland Nut | Brass | |
| 3 | Gland Packing | Neoprene | |
| 4 | Gland Packing | Asbestos Free Gasket | |
| 5 | Washer | Brass | |
| 6 | Spindle | Stainless Steel | |
| 7 | Body | Forged Brass (BS-218) | |
Danfoss CI-TI contactors and motor starters provide trouble-free switching and maximum protection for your costly motors and other electrical equipment. The components are compact, easy to install and extremely reliable. They have been designed to meet our customers requirements, based on comprehensive application experience. More than sixty years of manufacturing experience ensure that our contactors and motor starters stand out with regards to quality and long life.
Thermostatically operated valves are a simple and reliable control solution requiring neither electricity nor control air. An example of application is automatic control of water temperature in cooling systems.The valves are available with remote or built-in sensor.
Danfoss solenoid valves and coils are usually ordered separately to allow maximum flexibility, enabling you to select a valve and coil combination to best suit your needs. The Danfoss coil program consists of both the easy-to-handle Clip-On system and traditional coils with threaded fastener. Also, with approvals such as EEx/ATEX and UL, we offer a wide range of application specific coils for e.g. steam or hazardous areas.
Danfoss pressure transmitters help you keep demanding industrial processes under control. Accurate, robust and built for long life, they perform reliably day after day, even in the harshest environments.
The range of pressure switches includes components for general industrial use as well as specialised switches for demanding applications
The range of temperature switches includes components for general industrial use as well as specialised switches for demanding applications.
The Danfoss range of temperature sensors is based on decades of global experience within the marine industry and in refrigeration plants - undoubtedly some of the toughest environments around. Even in these demanding surroundings you can trust our products; they have a long life thanks to their robust design.
Externally operated valves are designed for more specialised applications, such as: Media with high dirt content, media with high viscosity, high ambient temperatures, large flow quantities, damp environments and where there is a risk of explosion
The range of differential pressure switches includes components for general industrial use as well as specialised switches for demanding applications.
Select from our large inventory of DAIKIN compressor spare parts for HVAC applications including air conditioning and refrigeration System. All parts photo and part no. displayed. Other than displayed parts will be given on Request.
Mr. Udaybhanu Mahendrakumar Dash (Vinayak Trading Co.)
206, Rubby Monarch Arcade, Saki Vihar Road, Sakinaka, Andheri (E), Mumbai, Maharashtra
Share us via
