Select from our large inventory of BITZER compressor spare parts for HVAC applications including air conditioning and refrigeration System. All parts photo and part no. displayed. Other than displayed parts will be given on Request.

RENISO K Oil

Description

The oils of the RENISO K series are highly refined, naphthene-based selective raffinates that have been dewaxed to a great extent for use as refrigeration oils at low temperatures. Because of their high degree of raffination, the mineral oils of the RENISO K series are very resistant to aging, both in contact with ammonia (NH3) and with HCFC.

Application

RENISO K refrigeration oils are used both for conventional NH3 applications with flooded evaporation according to DIN 51 503 KAA, as well as for halogenated chlorofluorocarbons (HCFC) according to DIN 51 503 KC.

Advantages

• High chemical stability with NH3 and halogenated chlorofluorocarbons (HCFC)
• Good cold flow, which insures oil return and optimum efficiency of the system, even at low temperatures.
• No formation of paraffin deposits at low temperatures
• Good solubility with fully and partially halogenated chlorofluorocarbons

• Forged Brass(BS 218 / Commercial Grade)
• Zero seepage
• Smooth interior finish provides unrestricted flow and reduced pressure drop.

Sight Glass Indicator is Compatible with all CFC, HCFC and HFC Refrigerants and oils and other Industrial gases / fluids non-corrosive to steel and brass. (With suitable Seal Material).

• Body: Hot Forged Brass (BS-218)/Copper Tube
• Element: Imported fused glass with color indicator.
• Seal: Neoprene O ring.
• Copper Tube: As per Refrigeration standards.
• Construction
  • Body: Hot Forged Brass (BS-218)/Copper Tube
  • Element: Imported fused glass with color indicator.
  • Seal: Neoprene O ring.
  • Copper Tube: As per Refrigeration standards.
  • Operation & Testing.
    • Maximum working pressure: 400 psig.
    • Working Temperature Range: (-30C + 100C).
    • Individual Pneumatic Testing at 400 psig.
    Installation for solder Connection
    • While brazing solder connection, disassemble theReplaceable Elementand use suitable filler material.
    • While re-assembling theReplaceable Elementallow the body to cool to room temperature and clean the part thoroughly. Use appropriate torque to avoid damage to the Neoprene O ring/Brass Body.

Danfoss CI-TI contactors and motor starters provide trouble-free switching and maximum protection for your costly motors and other electrical equipment. The components are compact, easy to install and extremely reliable. They have been designed to meet our customers requirements, based on comprehensive application experience. More than sixty years of manufacturing experience ensure that our contactors and motor starters stand out with regards to quality and long life.

Thermostatically operated valves are a simple and reliable control solution requiring neither electricity nor control air. An example of application is automatic control of water temperature in cooling systems.The valves are available with remote or built-in sensor.

Danfoss pressure transmitters help you keep demanding industrial processes under control. Accurate, robust and built for long life, they perform reliably day after day, even in the harshest environments.

The range of pressure switches includes components for general industrial use as well as specialised switches for demanding applications

The range of temperature switches includes components for general industrial use as well as specialised switches for demanding applications.

The Danfoss range of temperature sensors is based on decades of global experience within the marine industry and in refrigeration plants - undoubtedly some of the toughest environments around. Even in these demanding surroundings you can trust our products; they have a long life thanks to their robust design.

Externally operated valves are designed for more specialised applications, such as: Media with high dirt content, media with high viscosity, high ambient temperatures, large flow quantities, damp environments and where there is a risk of explosion

Select from our large inventory of BITZER compressor spare parts for HVAC applications including air conditioning and refrigeration System. All parts photo and part no. displayed. Other than displayed parts will be given on Request.

RENISO K Oil

Description

The oils of the RENISO K series are highly refined, naphthene-based selective raffinates that have been dewaxed to a great extent for use as refrigeration oils at low temperatures. Because of their high degree of raffination, the mineral oils of the RENISO K series are very resistant to aging, both in contact with ammonia (NH3) and with HCFC.

Application

RENISO K refrigeration oils are used both for conventional NH3 applications with flooded evaporation according to DIN 51 503 KAA, as well as for halogenated chlorofluorocarbons (HCFC) according to DIN 51 503 KC.

Advantages

• High chemical stability with NH3 and halogenated chlorofluorocarbons (HCFC)
• Good cold flow, which insures oil return and optimum efficiency of the system, even at low temperatures.
• No formation of paraffin deposits at low temperatures
• Good solubility with fully and partially halogenated chlorofluorocarbons

• Forged Brass(BS 218 / Commercial Grade)
• Zero seepage
• Smooth interior finish provides unrestricted flow and reduced pressure drop.

Sight Glass Indicator is Compatible with all CFC, HCFC and HFC Refrigerants and oils and other Industrial gases / fluids non-corrosive to steel and brass. (With suitable Seal Material).

• Body: Hot Forged Brass (BS-218)/Copper Tube
• Element: Imported fused glass with color indicator.
• Seal: Neoprene O ring.
• Copper Tube: As per Refrigeration standards.
• Construction
  • Body: Hot Forged Brass (BS-218)/Copper Tube
  • Element: Imported fused glass with color indicator.
  • Seal: Neoprene O ring.
  • Copper Tube: As per Refrigeration standards.
  • Operation & Testing.
    • Maximum working pressure: 400 psig.
    • Working Temperature Range: (-30C + 100C).
    • Individual Pneumatic Testing at 400 psig.
    Installation for solder Connection
    • While brazing solder connection, disassemble theReplaceable Elementand use suitable filler material.
    • While re-assembling theReplaceable Elementallow the body to cool to room temperature and clean the part thoroughly. Use appropriate torque to avoid damage to the Neoprene O ring/Brass Body.

Danfoss CI-TI contactors and motor starters provide trouble-free switching and maximum protection for your costly motors and other electrical equipment. The components are compact, easy to install and extremely reliable. They have been designed to meet our customers requirements, based on comprehensive application experience. More than sixty years of manufacturing experience ensure that our contactors and motor starters stand out with regards to quality and long life.

Thermostatically operated valves are a simple and reliable control solution requiring neither electricity nor control air. An example of application is automatic control of water temperature in cooling systems.The valves are available with remote or built-in sensor.

Danfoss pressure transmitters help you keep demanding industrial processes under control. Accurate, robust and built for long life, they perform reliably day after day, even in the harshest environments.

The range of pressure switches includes components for general industrial use as well as specialised switches for demanding applications

The range of temperature switches includes components for general industrial use as well as specialised switches for demanding applications.

The Danfoss range of temperature sensors is based on decades of global experience within the marine industry and in refrigeration plants - undoubtedly some of the toughest environments around. Even in these demanding surroundings you can trust our products; they have a long life thanks to their robust design.

Externally operated valves are designed for more specialised applications, such as: Media with high dirt content, media with high viscosity, high ambient temperatures, large flow quantities, damp environments and where there is a risk of explosion