Product / Services
Post Buy Requirement
Europa Machines

Europa Machines
Meerut Road Industrial Area, Ghaziabad, Uttar Pradesh

Add Review
Call 08069182178 Ext. 361

Our Products

  1. CNC Machine 5 Products available
  2. Grinding Machine 3 Products available

  3. Machines And Equipments

    2 Products available

  4. Gearbox & Gear Parts

    2 Products available

  5. Bending Machines

    1 Products available

  6. Router, Cables & Networking Devices

    1 Products available

  7. Generators

    1 Products available

  8. Sharpening Machines

    1 Products available

  9. Roll Forming & Bending Machines

    1 Products available
  10. Others Products 6 Products available

Other Products / Services

Leading Manufacturer, Supplier & Retailer of Cylindrical Grinder Jones, Cylindrical Grinder Jones Shipman, Daewoo Puma Machine, CNC Turning Center Mori Seoki SL and Gear Shaving Machine Hurth.

gear shaver

Gear Shaver
MITSUBISHI FB30 CNC GEAR SHAVERFanuc 21M CNC Control , 4 Axis Maximum Diameter:350mmMaximum Module:8Maximum face width:150mmA-axis swivel angle:+- 20Maximum cutter width:50mmCutter inner diameter:63.5mmMaximum cutter diameter:250mmMaximum workpiece speed:3000 RPMY-axis in and out travel:30mmZ-axis horizontal travel:75mmX-axis cutter head travel:105mm - 265mmMaximum distance between centers:575mm
View Complete Details
Ask Latest Price & Details
CNC GEAR SHAVER

CNC GEAR SHAVER
Maximum Module:8Maximum face width:150mmA-axis swivel angle:+- 20Maximum cutter width:50mmCutter inner diameter:63.5mmMaximum cutter diameter:250mmMaximum workpiece speed:3000 RPMY-axis in and out travel:30mmZ-axis horizontal travel:75mmX-axis cutter head travel:105mm - 265mmMaximum distance between centers:575mm
View Complete Details
Ask Latest Price & Details
Cnc Turning Center

Cnc Turning Center
CNC Turning Center Nakamura Tome TMC 30Product Details:Brand : Nakamura Model: Tome TMC 30Maximum Machining Diameter- 300 mmSwing Over Bed- 500 mmMaximum Shaft Length -500 mmMaximum Bar Capacity- 80 mmNumber of Turret Position- 10Control-Fanuc OT (With AC Servo Drives)Equipped With Chip Conveyor and ManualsMachine has no faults and it is under power at the moment.
View Complete Details
Ask Latest Price & Details
Cylindrical Grinder Jones

Cylindrical Grinder Jones

Swing 14" 356mmBetween centres 40" 1016mmTable swivels 12-0-16 DegreesTable traverse speed 3" - 180" per Minute 76mm - 4572mmWork head input 0.55 kWWork head speeds 25-300 rpmWork head swivels 15-0-90 DegreesWheel head input 415350 ac 4 kWNominal stone size 12" 305mm Diameter x 1" 25mm FaceWheel head infeed rate 0.0002" - 0.0012" 0.00048mm - 0.03048mmFitted with 1 x 2 Point x 1 x 3 Point SteadiesLength 8'8" 2.64mWidth 4'6" 1.37mHeight 5'10" 1.78mNett weight actual. 2.44 ton 2480 kgs
View Complete Details
Ask Latest Price & Details
Sprial Bevel Gear Generator Machine

Sprial Bevel Gear Generator Machine
Sprial Bevel Gear Generator Machine Gleason 16Make: GleasonModel: 16Specification:Teeth Size from 1 Module10 D.P. to 10 Module2.5 D.P.Outer Diameter from 24 mm1" to 300 mm12"Face Widths upto 250 mm10"
View Complete Details
Ask Latest Price & Details
Cylindrical Grinder Jones Shipman

Cylindrical Grinder Jones Shipman

Swing 14" 356mmBetween centres 40" 1016mmTable swivels 12-0-16 DegreesTable traverse speed 3" - 180" per Minute 76mm - 4572mmWork head input 0.55 kWWork head speeds 25-300 rpmWork head swivels 15-0-90 DegreesWheel head input 415350 ac 4 kWNominal stone size 12" 305mm Diameter x 1" 25mm FaceWheel head infeed rate 0.0002" - 0.0012" 0.00048mm - 0.03048mmFitted with 1 x 2 Point x 1 x 3 Point SteadiesLength 8'8" 2.64mWidth 4'6" 1.37mHeight 5'10" 1.78mNett weight actual. 2.44 ton 2480 kgs
View Complete Details
Ask Latest Price & Details
Daewoo Puma Machine

Daewoo Puma Machine
Product Details: Brand : Daewoo PumaModel: 10 HCMaximum Machining Diameter- 300 mmSwing Over Bed- 500 mmMaximum Shaft Length -500 mmMaximum Bar Capacity- 80 mmNumber of Turret Position- 10Control-Fanuc OT (With AC Servo Drives)Equipped With Chip Conveyor and ManualsMachine has no faults and it is under power at the moment.
View Complete Details
Ask Latest Price & Details
Hob Sharpening Machine

Hob Sharpening Machine
Make: Klingelnberg Model: GW 30 A Maximum Hob Diameter: 300 mm Grinding wheel diameter: 160300 mm Grinding depth: 85 mm Machine is fully complete with Change Gears, Index Plates and Many Accessories Machine come along with a copy of operating manual Machine is in Very Good Condition
View Complete Details
Ask Latest Price & Details
CNC Turning Center Mori Seoki SL

CNC Turning Center Mori Seoki SL

Maximum Machining Diameter: 660 mmSwing Over Bed:770 mmMaximum Shaft Length: 3500 mm Maximum Bar Capacity: 120 mmNumber of Turret Position : 12 ( 6 Rotary tools) Control: Fanuc MF-T6Equipped With Chip Conveyor, Servo Voltage Stabilizer and Manuals Machine has no faults and it is under power at the moment.
View Complete Details
Ask Latest Price & Details
Gleason 26 Hypoid Generator

Gleason 26 Hypoid Generator
Max. Wheel Diameter 840 mmGear width 250 mmMax. Module 15Min. Module 1 SPECIFICATIONS:Maximum Diameter Gear: 33"Cone Distance Max (30 deg. and 18" Cutter): 16 12"Max. Pitch Angle:Shaft at 90 Deg.: 84 Deg. 18'Min. Pitch Angle: 5 Deg., 42'Extreme Ratio: 10:1Max Face Width: 4"Diametral Pitch: 1 12Diameter of Taper Hole at Large End: 6" 152mmTaper Per Foot: 34" 19mmDepth of Taper: 6", 152mmDiameter of Hole Through: 5" 127mmSpindle Nose to Machine Center: 9 14", 235mmCutter Diameter: 9", 12", 16", 18"Max Offset Above Center: 4 12"Max Offset Below Center: 4 12"Max. Distance from Machine Center to Nose of Spindle: 23 12"Min. Distance from Machine Center to Nose of Spindle: 5"Cutter Speeds-Feed Per Minute: 35 - 200Feed (sec.tooth): 23 - 333Main Motor - 2 Speed: 7 12 HP
View Complete Details
Ask Latest Price & Details
Gleason 26 Sprial Bevel Gear

Gleason 26 Sprial Bevel Gear
Gleason 26 Hypoid GeneratorMax. Wheel Diameter 840 mmGear width 250 mmMax. Module 15Min. Module 1 SPECIFICATIONS:Maximum Diameter Gear: 33"Cone Distance Max (30 deg. and 18" Cutter): 16 12"Max. Pitch Angle:Shaft at 90 Deg.: 84 Deg. 18'Min. Pitch Angle: 5 Deg., 42'Extreme Ratio: 10:1Max Face Width: 4"Diametral Pitch: 1 12Diameter of Taper Hole at Large End: 6" 152mmTaper Per Foot: 34" 19mmDepth of Taper: 6", 152mmDiameter of Hole Through: 5" 127mmSpindle Nose to Machine Center: 9 14", 235mmCutter Diameter: 9", 12", 16", 18"Max Offset Above Center: 4 12"Max Offset Below Center: 4 12"Max. Distance from Machine Center to Nose of Spindle: 23 12"Min. Distance from Machine Center to Nose of Spindle: 5"Cutter Speeds-Feed Per Minute: 35 - 200Feed (sec.tooth): 23 - 333Main Motor - 2 Speed: 7 12 HP
View Complete Details
Ask Latest Price & Details
Gear Shaving Machine Hurth

Gear Shaving Machine Hurth
Max. Workpiece diameter 350mm Min. Workpiece diameter 20mm Tooth width 150mm Max. module 8 Min. module 1 Table travel longitudinal150mm Table travel cross 10mmVertical adjustment of table 175mm Swivel range horizontal 0 - 180 Shaving cutter diameter 174 - 260 mm Shaving wheel spindle turning speeds 45 - 385 Umin Shaving Cutter drive motor 3KW Feeds of table 6 - 285 mmmin Min. workpiece diameter 20mm Electrics 38050 VHz Total power requirement 12KW Weight of the machine ca.5.60T
View Complete Details
Ask Latest Price & Details
gear shaving machine

Gear Shaving Machine
Gear Shaving Machine HURTH ZSA 420 Workpiece diameter min. 80 mm. Workpiece diameter max. 420 mm. Max. module 10. Face width parallel cycles max. 150 mm. Head rotation +-23. Speed of cutter spindle 45 a 385 r.p.m.
View Complete Details
Ask Latest Price & Details
Gear Measuring Machine

Gear Measuring Machine
1,000 /Unit Get Latest Price
  • Brand Name Maag
  • Voltage 220-240 V
  • model PH 60.
  • gear diameter max. 320 mm, min. 10 mm.
  • between center hight max. 590 mm, min. 30 mm.
  • Display Type Digital
  • Grade Semi-Automatic
  • Supply AC
  • Phase 3 Phase
View Complete Details
Ask Latest Price & Details
Gear Hobbing Machine

Gear Hobbing Machine
Gear Hobbing Machine Lambert 751Specification DescriptionMax workpiece diameter 88 mmMax Modul 1.5 DP 17Smallest Wheel diameter .078"Largest wheel diamter (milling 24mm) 3.46"Largest wheel diameter for 32mm milling 3.14"Largest milling length (for straight toothing) 1.97"Largest milling length (for angled toothing) .98"Max pitch angle 20 degMax module in steel 1.5Max module in brass 2.0Milling Speeds 150-1060Tooth Speeds 4-390Feed per workpiece rotation .0013"
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us